Qosmio F50-125: change of hard disk

Similar Questions

• Qosmio F50-125 - yield is very low

  I purchased a Qosmio F50-125 and right out of the box, it runs as a piece of junk. Everything is a little slow, when I boot it and it goes to welcoming screen, it says "Please wait" then 2 minutes.

  But worst of all is that everything is a bit slow and jerky when I surf the Internet. If I try to watch a video on youtube, it's a slide show. I downloaded 3d mark 2006 and with this map graphic, I should get about 7800 but I get only 3800. His true annoyng and I can't understand what could be the problem.

  Thing is that I bought the computer in my home country (Serbia) but I am now in France and will stay here for at least 4 months, so I can't take back. Any1 got clues about how to solve this problem? TX.

  Hello

  Friend of me a Qosmio F50 and he is very satisfied with this laptop and I only can it s very fast and doesn t do it no problem again.

  Anyway, all the time long start, you must check this Toshiba document:
  http://APS2.toshiba-tro.de/KB0/FAQ9401B10001R01.htm

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  You have yellow exclamation marks in Device Manager?
  Can notice errors in the Windows Event Viewer?

  Slow performance can also be caused of internet security software. What software do you use? I recommend AntiVir.

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• Qosmio F50-125 - how to use the TV - FM Tuner in Windows 7

  Hello

  I use Qosmio F50-125 and I've just upgraded to Windows 7.
  Earlier, I discovered that I have a TV tuner on my laptop and I don't know how to use it.

  First of all, I don't have drivers for my TV tuner and tried to download something like v.2.3.3.31 driver TV tuner on the toshiba site, but it is not a typical setup.exe but only some files inside.

  If you could tell me a little more about how to use my TV option and how to install the correct drivers, I would be really grateful.

  Thanks in advance!

  After you have extracted the files you get the folder with other files
  I assume these are files required by FM tuner driver.

  Now you need to go to Device Manager, must mark the FM tuner (possibly unknown device if the driver is missing) a duty to install/update the driver.
  In your case, use the Advanced Setup.
  This allows to point to the files extracted.

• Change of hard disk: System update will work?

  I consider changing my 7200 RPM HD with a new Intel Solid - State Drive 520 series 180 GB. How this will affect the use of the system to update? He will be able to detect and work with my new hardware, or it will stop working?

  Currently I left 725 days my Lenovo warranty. Change of hard disk would probably void the warranty.

  PC: ThinkPad X 1 (1294-2PG)
  5-2520M (2.50GHz), 4 GB RAM, 320 GB HD 7200 RPM, LCD 13.3 in 1366 x 768, Intel 802.11agn wireless, WWAN, Bluetooth, Intel HD graphics card, 1 Gb Ethernet, Ultranav, Secure Chip

  Hello.

  (1) you should have no problem with the update of the system after the upgrade of your player.

  (2) change the Player won't empty your warranty as long as you don't cause damage by improper installation.

  the player is called a "self-service CRU" (CRUS by). If you look at the hardware maintenance manual pg98 (http://support.lenovo.com/en_US/downloads/detail.page?DocID=UM006394), you will see that the disk is not #5 in the exploded view. a page to the bottom, you will see a single * in the RAW Id column for the items in the list #5. Scroll to pg97 and you will see the definition of a "CRU" self-service ".

  HTH a little.

• Restores possible OneKey Rescue button on change of hard disk physical?

  I am a very new user of lenovo and recently bought an Ideapad Y460.

  The default hard drive is 500 GB with a speed of 5400 RPM.

  I wanted to change my hard drive to an SSD hard to increase performance.

  Before doing so, I created a set of recovery plant (3 DVDs) discs using the pre-installed OneKey Rescue System.

  I am aware that for the button OneKey Rescue work, the system must have a separate with the original disk image partition.

  My question is that if I install a new hard drive, the recovery of the DVD discs recover the original function of my laptop, returns to its new factory-installed state?

  The OneKey recovery will work properly?

  The recovery disks sutomatically will make the hidden partition, the C and the disks on my new SSD?

  Thanks for your time and any help will be greatly appreciated.

  replacing hard drive with rpm higher can help you.

  (consider about upgrading ram, too)

  http://Forum.Lenovo.com/T5/IdeaPad-Y-U-B-V-and-Z-series/disk-partioning-and-OneKey-recovery-feature/...

  (please, hit that "accept as solution" response if any message helped you to solve)

• I change my hard disk 500 GB, he had a particion front and right is now read 300gh, how do I retrieve the disc?

  I tried to format it, but the phone told me I don't have enough authority.

  Hello

  ·         What is the brand and model of hard drive?

  ·         Internal or external HDD that you use?

  Method 1:

  You can try to fix this by checking a disk or disks to find errors.

  I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:

  I recommend you change the drive letter for the drive and check if it solves the problem.

  a. Click Start on the taskbar, and then right click on my computer on the desktop or in the start menu then click on manage.

  b. under computer management, click Disk Management.

  c. in the list of drives in the right pane, right click on the removable device and then click on change drive letter and paths.

  d. click on edit and in the drop-down list box, specify a drive letter for the removable device, choosing one that is not assigned to the mapped network drives.

  e. click OK, and then click OK again. To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.

  Method 3:

  You can also check out the article below and check if it helps:

  Formatting disks and drives

  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Note: Formatting erases all existing files on a hard drive. If you format a hard drive with files it contains, the files will be deleted. Make sure that you back up all your important data.

  Thank you and best regards,

• HP Pavilion 15-n067Sg: change of hard disk

  I want to change the hard drive on an HP Pavilion n067Sg 15.  It seems I have to disassemble the computer laptop everything. Can someone help me?

  Thank you

  Hello

  Hope this link helps you

  http://h10032.www1.HP.com/CTG/manual/c04439615

  Check the Page 67

• How to open my R5-571-59DC to change the hard disk

  Can someone explain how to open my r5 - 571 to change the hard drive for an SSD and increase the ram? Thanks much for any help.

  Course, the R series is similar, my R3 has twelve screws at the back. Once removed, the back is pried off. Doesn't have a lot of strength. Connectors must back spilled up to remove. The cables are delicate so always be sweet.

  PS there is a microphone (interlock) under one of the screws two Center. Machine does not except so depressed, so make sure that screws are tight.

• After change of hard disk

  When I change my hard drive of my laptop. computer watch

  

  What, in other words somethings else was unemployed? What can I do?

  My laptop is Dell inspiron 15 7537, and I change the same hard driver band for my laptop

  Hi James101ku,

  You must install Windows on your new hard drive. Please refer to my link below for a good installation guide for Windows.

  Good luck!

• Qosmio F50-114 - to upgrade the disk HARD & 8 GB RAM

  Good day everyone,

  My computer has only 1 320 GB HARD drive.
  Can I added another an or I have to replace it with a new one? and what HARD drive I can use?

  I also want to update the 8 GB RAM: How can I do?
  Toshiba F50-114.

  See you soon

  To be honest I don t understand why you need these big HDD and 8 GB of RAM but I will try to provide you with details what's possible and what upgrade is not possible.

  As you say the F50-114 was equipped with 320 GB HARD drive. In my view, a larger HARD drive is possible, but first you have to find a larger HARD SATA 2.5 drive.
  I googled a bit, but the hardest are rare at the moment.

  Regarding the upgrade of RAM;
  As far as I know this laptop supports the Chipset Mobile Intel PM45 Express.
  According to the Intel 4 sheet series Mobile Intel PM45 Express Chipset 8 GB are possible, but it's maximum!

  Check that this leaves Chapter 1.1:
  http://www.Intel.com/assets/PDF/datasheet/320122.PDF

  Welcome them

• Change the hard disk of 1.4 Ghz Mac Mini end of 2014

  Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.

  My Mac is:

  Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.

  So, my best regards to the community and hope for a response.

  I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:

  • Samsung 850 Evo SSD
  • Cutting Ultra Slim 2.5 SATA to USB 3.0 aluminum hard drive external enclosure

  Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.

  Good luck!

• Windows 7 it's without a permit after changing the hard disk (disk image)

  Hello
  I get a frequent reminder of microsoft my pre installed windows in unlicensed. I went through the process of checking online, but this has not helped (prompted him download fails during the installation). I recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & indicates the product ID.

  Can anyone suggest what I should do to get more of this?

  > I have recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & displays the product ID

  Retrieve the laptop using the Toshiba recovery disc after the HARD drive was replaced?

  The operating system which is part of the Toshiba recovery image has already been activated so the new activation should not be possible and necessary!

  Don t know what is the problem here, but I recommend you to reinstall the operating system once more using Toshiba Recovery disk (I hope that you have created in the past)

• DV6 - 6163cl: change of hard disk for laptop ide (ata) to Sata

  OK, I bought a hybrid of 1 TB HARD drive and it is a sata drive. I noticed that the 750 GB drive in my notebook is a disk Ide (ATA). How can I make the new sata drive works in this notebook? Or can I?

  Thank you.

  That's right, and your model may take a SATA III (6.0 GB/S) hard drive.