I can connect an NI MXI-Express RIO 9154 off the cRIO-9068 serial?

I would use the cRIO-9068 a new system but will need a second wreath off the first chassis. Can I use NI MXI-Express RIO 9154? If so, how to connect the MXI cable until the 9068?

Not the MXI Express, but you can use EtherCAT: chassis NI 9144 8 locations EtherCAT Slave for C series i/o Modules

Tags: NI Hardware

Similar Questions

  • I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

    I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

    Original title: unidentified network

    Hello

    Thanks for choosing Windows and thank you for providing an opportunity to help you.

    According to the description, you are having problems with the unidentified network error message.

    Perform the steps from the link below and see if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

    Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

    Good day!

    Hope this information helps.

  • Laptop can connect wirelessly, but not through cable utp to the internet. Help!

    I tried to connect my computer laptop windows 7 to the internet using a utp cable. Unfortunately, without success. Works with wireless, but in my dorm, I cannot use internet via cable. I tried to turn off the wireless, but that did not work either the comouter does not recognize that the cable is already connected. Please help me solve this problem.

    Thanks for your help in advance! :)

    I would check the cable carefully.  Sometimes, some of the wires are loose from the plug.  See if the laptop can connect to cables in other places.  If possible, the problem is with the cable and not on your computer.

    Good luck.

  • I can, t find my serail number its rubbed off the coast in the years

    It is in any case I can find my serail number I have a windows vista home basic laptop

    Hello

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    The methods above do normally not require product key that has rubbed off.

    The recovery process should include the auto Activation using the factory installation product key, in collaboration with the material.

    See you soon.

  • How can I determine the MACaddress of the Gen 4 Apple TV so that I can connect to my network. Must register on the router MAC address to connect to the internet.

    Security on my network requires that the MAC address of the device must be registered on router or I can't connect to the internet. Does not use a password based security configuration. How to find MAC address before the introduction of Apple TV?

    Contact your ISP

  • can connect to my laptop to router but not the internet

    I got my son a laptop is a fujitsu, XP home, 1.73 dual core. When I try to connect to the wireless network, it finds my router Belkin Surf N, but it connects with local access only, or limited access when I connect via an ethernet cable to the Web without problem.

    Help, please.

    Hi kevinattard,

    Did you do any hardware changes or software on your computer before this problem?

    You can follow this link completely and check if the problem persists:

    Windows wireless and wired network connection problems

    Hope the helps of information.

  • BlackBerry Smartphones can not remove grayed files after you turn off the WiFi sync

    I got sync music WiFi on, but after I left the proximity of my WiFi, there more grayed out 1,000 entered the path of my browsing in the 100 or if the files that are available locally on the device.

    Then I turned off sync music Manager Office, but even after many cycles of connection/disconnection between BB & USB WiFi, all these files in gray are always in the way on the music of the BB icon tag navigation interface.

    How can I uninstall this feature? Otherwise, how could I make my icon music works as he did, not broken by WiFi-sync as it is now?

    Please notify.

    If you want to uninstall WiFi Sync, please go to the Options icon > device > application > search for WiFi Sync and delete

  • Can I reactivate my NAS200 of a State off the power via a local network?

    I want to be able to stop the NAS200 on a calendar.  Then I wake up at a certain time or I can reactivate via the LAN to a power off State?

    Thank you

    Steve

    This is not possible, with the stock firmware, or alternative firmware. Electronics just can't stand what I know.

    = Jac

  • NEITHER 9219 fully supported on the RIO MXI-Express?

    I'm trying to choose for my RIO MXI-Express chassis cRIO modules and I fell on the NI 9219 universal module.  While reading the user guide, I noticed that it is said in two separate sections as the 'Digital mode' and "Mode of Contact open' is 'supported only in CompactRIO systems." As I don't have the actual hardware for me to test, I created a LabVIEW project using the FPGA Wizard and he had to instantiate a chassis of RIO MXI-Express (NI 9159) connected directly under 'my computer '.  I then load a NI 9219 module and set 0 "Digital In" mode and Channel 1 channel mode "open Contact".   After that I dragged & filed two channel nodes in my block diagram and I was happy to see that the LabVIEW compiler thinks that everything is OK.

    So my question is, whenever I read "is supported only on the CompactRIO systems" does also include MXI-Express RIO systems as well?  If so, it seems that some documentation for cRIO modules should be updated.

    NEITHER 9219 plug: http://sine.ni.com/nips/cds/view/p/lang/en/nid/208789

    NI 9219 user guide: http://www.ni.com/pdf/manuals/374473e.pdf

    Thank you

    Hi SeanDonner,

    Yes, the RIO MXI-Express is deemed part of the cRIO system.  In addition, for lovers of the future forum, the chassis Ethernet RIO and EtherCAT RIO are also part of the cRIO system.

  • How can I set Up Airport Express with an existing router/modem from the ISP

    I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer. I suggest you to connect the printer to the Airport Express A1392 Epson) via a USB port to enable the AirPrint features.  However, I guess the Airport Express must be an ethernet to the modem/router ISP connection and then use the Epxress airport more convenient than my wireless router.

    Issues related to the:

    1. do I need to turn off the function the ISP router's wireless when I plugged as stated above? So I wait.

    2. as the Airport Express only has one ethernet port I assume that I can connect my other ethernet connections using a hub 4 ports connected to the Airport Express Terminal.  It will be always possible to use other ports ethernet on the modem/router ISP as well?

    Doug

    I have a wireless modem/router ISP and I want to get the ability to use Air Print using a non-Airprint but the USB printer.

    You may have received incorrect information, because a non-AirPrint on the USB port on an AirPort Express Terminal... or any other router from Apple also printer... do not make the AirPrint-compatible printer.

    You want to continue nevertheless to check that this is true?

    The AirPort Express can connect to the network wireless router using a wireless connection... or... it can connect to one of the router's Ethernet ports using a wired Ethernet connection.

    Wired connections are always preferable wireless if possible for your Express.  Turn off the wireless router is not necessary if you want to connect to the Express using an Ethernet connection.

  • I can connect to my Bank, but can't access the page of statement - but I can't in Chrome

    I can connect to my Bank [Barclays] and go to the page where it gives me my balance. Then when I click on that to make my statement that it takes me to another page which is completely [greyed] empty. I tried several times over several days. However when I tried chrome instruction had no problem.
    I have Firefox version 29.0.1 and Windows 8.1. Also Kaspersky 2013 installed

    Try to save your options again.

    I found that after Firefox v29, a LOT of my settings and
    Add - ons have been changed / reset.

  • I can connect to Xbox Live on my console, but I can't log in with my account. What's wrong?

    (I also posted this in the Xbox support forums.)

    My Xbox (non-slim white one) equipped with a wireless adapter and can securely connect to our wireless network. When I test the network to see if it can connect to Xbox Live, it works and ends the test. But when I try to login with my account, it gets stuck on the graph 'Signing In '. For the briefest moments, it looks like an error message appears right before you start to connect. But he goes in a fraction of a second and the sign in process is blocked. Is there something wrong with the Xbox, my account or something else? Help, please.
    (I can connect to Live with my account on my PC and my WP7, so I think this could be the Xbox or something...)

    Hello

    ·        You sign for Windows Live?

    I suggest you to see link below and check if it helps.

    http://support.Xbox.com/en-us/Xbox-Live/troubleshoot/sign-in#exp5-1

    If the problem still persists, I suggest you to ask your question in the Xbox Forums.

    http://forums.Xbox.com/?XR=shellnav

    I hope this helps.

  • Can connect you wirelessly on a Pocket PC V36?

    I have a Pocket PC V36 and I was wondering, how can connect wireless to this topic? This is the version 4.20.1081 and the 2003 version.

    Hi rafty12,

    You will need access to the phone user's guide to learn how to configure it, see the link below to download the user guide on the site to view sonic.

    http://ViewSonic.PT/support/mobilewireless/PocketPC/pocketpcv36/#features

  • Can connect via the VPN, but cannot see the files

    I can connect via VPN to my company network, but the files do not arise under Vista. I have no problem to see them on my old Windows PC, so this is a specific problem of Vista. On my old system, just click on computer and it shows me my company on the network's records. No Vista - cannot find anywhere, even if I am connected via VPN. Where are they?

    Hello

    Since it is the network of the company, there is no way to know hwo security is configured, unless you are a computer scientist in society.

    Not "mess up" your computer, first talking to the person in charge of VPN connections.

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • The manual says I can connect speakers or headphones to my headphones Jack (SVF15A1).

    My VAIO SVF15A1 has a headphone jack (I guess that's a tip-ring-ring-sleve SOCKET configuration).  The manual says I can connect speakers or headphones to this Jack, but the speakers and headphones usually have the usual configuration of TRS stereo (less unique ring on the plug).

    I'll damage my laptop by plugging the standard TRS headphone into a HEADPHONE jack?  Remember, headphones and speakers do not have a microphone.

    One web site says that a TRS jack will be short the microphone and the ground, but does not hurt.

    Here is a picture of what I'm trying to describe.  The iPhone headphone cable is similar to the Sony headphone jack configuration

Maybe you are looking for