I can connect to Citrix, but cannot access the Office once in Citrix. This just happened and was fine yesterday
This isn't a matter of McAfee as I talk with them and we turned off the coast of McAfee and the remins still question
Type of topic: addons< enter > in the address bar to open the Add-on Manager.
Access key; < Control >(Mac: < command >) < shift > has)
On the left side of the page, select Plugins.
Make sure that the ones you want to use is on Ask or Allow.
Go to the web page. Once the page loads, mouse to the address bar
and left click the icon. A window to display information of site should
developed. Select more information. Now select permissions. In the
menu, make sure that those you want to use is on Ask or Allow.
Tags: Firefox
Similar Questions
-
Hello
My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?
Thanks in advance.
Hello @jerome256,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I understand that you are having a problem with your WiFi and wanted to help you!
You are trying to access WiFi through router? If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router. Check that the router is connected to the internet. If you have more than one router, then you can ensure that you are connected to the correct router. You can also try unplugging the router for about 30 seconds, and then reconnecting it. Please consult the following document, as it can help solve the problem for you:
HP PC - Troubleshooting wireless network and Internet (Windows 10)
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK
I tried to set up a simple customer vpn using this document
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of VmHKIhnF4Gs5AWk3
VmHKIhnF4Gs5AWk3 encrypted passwd
hostname VOIPLABPIX
domain voicelab.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 208.x.x.11 255.255.255.0
IP address inside 172.10.2.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool voicelabpool 172.10.3.100 - 172.10.3.254
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1
Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
client authentication card crypto LOCAL map1
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 encryption aes-256
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address voicelabpool pool cuclab
vpngroup dns 204.x.x.10 Server cuclab
vpngroup cuclab by default-field voicelab.com
vpngroup split tunnel 101 cuclab
vpngroup idle 1800 cuclab-time
vpngroup password cuclab *.
Telnet timeout 5
SSH 208.x.x.11 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 172.10.1.2 255.255.255.255 inside
SSH timeout 60
Console timeout 0
username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2
Terminal width 80
Cryptochecksum:b03a349e1ac9e6022432523bbb54504b
: end
Try to turn on NAT - T
PIX (config) #isakmp nat-traversal 20
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
HTH
-
Trying to repair XP Home CD, but cannot access the screen where you choose to repair or install fresh.
I get the first screen where you have the choice to configure windows or press 'r' for recovery console.
After I press enter for the installer, do not me the usual on-screen next where it is said that if the following XP installation is damaged, you can repair it. Instead, it leads me to a screen where it shows my partitions and asked that one I want to install windows on. If I choose "C:" he then told me that there is already a system opperating on the partition...
Hello
Follow the steps of "Error Message: Setup cannot set the required Windows XP Configuration Information.
' http://support.microsoft.com/kb/316425 '.Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop
Hi MelissaBoltik,
· What is the exact error message?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start and then click Run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article to reset the TCP/IP settings.
How to reset the Protocol Internet (TCP/IP)
-
VPN works, but cannot access the LAN...
I have cisco vpn client connection to a 1721 at the office. the client connects and I can access the office LAN but but not the local network. I have the box checked in client vpn to allow access to the local network. Help, please!
Thank you!
Matt
Here is the config:
Current configuration: 3901 bytes
!
version 12.2
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
Cerberus hostname
!
start the system flash c1700-k9o3sy7 - mz.122 - 11.T10.bin
AAA new-model
!
!
RADIUS AAA server group SERVERS RADIUS
auth-port 1645 192.168.69.1 Server acct-port 1646
!
AAA authentication login LOGIN group SERVERS RADIUS local
local NETGROUPAUTH AAA authorization network
AAA - the id of the joint session
!
username mattheff password xxx
username mikeheff password xxx
clock timezone CST - 6
clock to summer time recurring CDT 2 Sun Mar 2:00 1 Sun Nov 02:00
IP subnet zero
!
!
IP domain name heffnet.net
name of the IP-server 68.94.156.1
name of the IP-server 68.94.157.1
DHCP excluded-address IP 192.168.69.1 192.168.69.99
DHCP excluded-address IP 192.168.69.111 192.168.69.254
!
dhcp HEFFNET_LAN_POOL_1 IP pool
network 192.168.69.0 255.255.255.0
router by default - 192.168.69.254
Server DNS 68.x.x.1 68.94.157.1
!
audit of IP notify Journal
Max-events of po verification IP 100
VPDN enable
!
VPDN-group pppoe
demand dial
Protocol pppoe
!
!
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
Configuration group VPNGROUP crypto isakmp client
8mathef8 key
68.x.x.1 DNS 68.94.157.1
heffnet.net field
pool VPN_CLIENT_POOL
ACL 102
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac VPNSET1
!
crypto dynamic-map 10 DYNMAP
game of transformation-VPNSET1
!
!
list of authentication of card crypto VPNCLIENTMAP customer LOGIN
list of crypto isakmp NETGROUPAUTH VPNCLIENTMAP card authorization
crypto card for the VPNCLIENTMAP client configuration address respond
card crypto VPNCLIENTMAP 10-isakmp dynamic ipsec DYNMAP
!
!
!
!
interface Loopback0
IP address 1.1.x.x.255.255.252
!
ATM0 interface
Heffnet WAN/SBC DSL Interface Description
no ip address
No atm ilmi-keepalive
PVC 0/35
PPPoE-client dial-pool-number 69
!
DSL-automatic operation mode
no fair queue
!
interface FastEthernet0
Heffnet LAN Interface Description
IP 192.168.69.254 255.255.255.0
IP nat inside
IP tcp adjust-mss 1452
route VPN_ROUTE_MAP card intellectual property policy
automatic speed
!
interface Dialer69
MTU 1492
the negotiated IP address
NAT outside IP
encapsulation ppp
Dialer pool 69
PPP chap hostname cerberus
PPP chap password xxx
PPP pap sent-username [email protected] / * / password xxx
card crypto VPNCLIENTMAP
!
local IP VPN_CLIENT_POOL 192.168.70.200 pool 192.168.70.253
IP nat inside source list interface INTERNALLY Dialer69 overload
!
IP classless
IP route 0.0.0.0 0.0.0.0 Dialer69
no ip address of the http server
!
!
INTERNAL extended IP access list
deny ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255
IP 192.168.69.0 allow 0.0.0.255 any
!
record 192.168.69.1
access-list 101 permit ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255
access-list 102 permit ip 192.168.69.0 0.0.0.255 any
!
VPN_ROUTE_MAP allowed 10 route map
corresponds to the IP 101
set ip next-hop 1.1.1.2
!
alias exec s show ip interface brief
alias exec sr show running-config
!
Line con 0
privilege level 15
Synchronous recording
line to 0
privilege level 15
Synchronous recording
line vty 0 4
privilege level 15
Synchronous recording
line vty 5 15
privilege level 15
Synchronous recording
!
Scheduler allocate 4000 1000
end
Hi Matt,
The config looks good. Please make sure that you get a route to 192.168.69.0 255.255.255.0 network only after the connection to the VPN client. Please also correspond to the exit "route print" before and after the connection. One last thing, I hope that the local network is not 192.168.69.0.
HTH,
Please rate if this helps,
Kind regards
Kamal
-
Original title: problems cannot do anything
Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything
Hi birdylod,
· What version of the operating system is installed on the computer?
· You did changes to the computer before the show?
· You use Internet Explorer? If so, what version are you using?
· What files you download?
Follow these methods.
Method 1: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 3: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
For reference:
What to know before applying permissions to a file or folder
-
I can connect to the WLan, but cannot access the internet on Tecra A8
There is no problem when I use the LAN port.
When I use the WiFi (wifi adapter Tecra A8), I can connect to the network, but the status is local, I can't access the internet.I've updated my access point with the latest firmware (D-link DWL-2000AP +).
I do not get a new IP address.My OS is Vista.
Hello
You have set up the WLan router with the right data from your ISP (internet service provider)?
Further, I would recommend to disable all security on the router option and try to access the internet.
I mean, you must disable the encryption (WEP, WPA), Mac filtering address, etc.
In addition, check if, in settings TCP/IP, the option as "obtain an IP address automatically' has been set.Have you tried the WiFi connection using the customer like Intel ProSet utility or Atheros configuration tool?
These tools can be used instead of own WLan connection option of Windows.Reset you the WLan router? This!
Pleas check al these proposals
-
I can connect to wifi networks but cannot access the internet
As the title says, I have no problem connecting to all types of wireless (password protected or not), but once I plugged in, there is always a message saying that I have limited access, and I will not be able to access internet since. It is not a problem specific to any router, it's just my laptop wireless. Direct connections (with an ethernet cable) work quite well. When I tried to solve the problems through windows I got the message error "wireless network connection is not a valid IP configuration.
I have honestly tried most of the solutions out there but stuck on what I can do nextHello
Thanks for posting in the Microsoft community. I understand that you are able to connect to a wireless network, however you are unable to access the Internet when it is connected to the wireless network.
It would help if you could let us know about any changes made to the computer before the show.
I suggest that you try the following steps and check.
Method 1:
Check out the link and follow the steps.
Windows wireless and wired network connection problems
Method 2:
Visit the link and try the troubleshooting provided steps.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Let us know if these methods on the other will respond and we can provide several methods.
-
Equium P200-1IR - wireless is connected but cannot access the internet
Hi there,
Need a little help!
I just bought an Equium P200 1IR.
I activated the wi fi.
I see my router which is Talk Talk.
Can I get the laptop to connect to the router and it says I'm connected,
However I can't access the internet.I tried the same process by inserting a WiFi dongle into the USB port
on the laptop, and exactly the same thing happens.
We have other home computers that connect to the router and the internet
OK using the wireless dongle.
I plugged a rigid cable between the laptop and the router connection and I can't
access the internet immediately without any problem, however, would be delighted
to use the wireless function.Any help really appreciated... Thank you
Waynec
Hello
Try please reboot your router. A few weeks ago, I had a similar problem with my Satellite A300. WLAN is connected but Internet was not available. After the router is restarted all of a sudden everything was ok again.
-
I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.
However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.
Any ideas? Thank you!!
JFerguson15,
If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.
Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?
It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.
-
I've updated my laptop lenovo Y430 to Windows 7 Home Premium about 6 months ago, it has been working fine until last week, I just can't connect to the internet more. I used to use a wireless network, now it says that it is connected to the network, but 'no internet access', while the signal says it's just. I also try to always use the Wired internet, not luck, and worse yet, he says no 'identified Network/No access to the Internet.
"I have troubleshooted, that is the message he gave me: 'Connection to the Local network' is not a valid IP Configuration.
I run 'ipconfig' cmd and this is what gives me:
C:\Windows\System32>ipconfig
Windows IP configuration
Wireless network connection Wireless LAN adapter:
State of the media...: Media disconnected
The connection-specific DNS suffix. :Ethernet connection to the Local network card:
The connection-specific DNS suffix. :
Link-local IPv6 Address...: fe80::e99e:3f78:35 c 3:7056 %11
Autoconfiguration IPv4 address. . : 169.254.112.86
... Subnet mask: 255.255.0.0.
... Default gateway. :Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :Card tunnel Teredo Tunneling Pseudo-Interface:
State of the media...: Media disconnected
The connection-specific DNS suffix. :Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :C:\Windows\System32 >
and I've run ' ipconfig/all', that's what I got:
C:\Windows\System32>ipconfig/all
Windows IP configuration
Name of the host...: salt - PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Wireless network connection Wireless LAN adapter:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Intel(r) WiFi Link 5100 AGN
Physical address.... : 00-16-EA-DC-69-22
DHCP active...: Yes
Autoconfiguration enabled...: YesEthernet connection to the Local network card:
The connection-specific DNS suffix. :
... Description: Broadcom NetLink (TM) fast Ethernet
Physical address.... : 00-1E-EC-96-77-04
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::e99e:3f78:35c3:7056% 11 (Preferred)
Autoconfiguration IPv4 address. . : 169.254.112.86 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
DHCPv6 IOOKING...: 234888940
DHCPv6 DUID customer...: 00-01-00-01-10-38-1C-FD-00-1E-EC-61-19-2CDNS servers...: 85.255.112.123
85.255.112.234
NetBIOS over TCP/IP...: enabledTunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Teredo Tunneling Pseudo-Interface:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #2
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesPlease answer asap, HELP!
Thank you.
Sincerely,
Evan
Yes.
Routers and switches are different types of network devices. Routers are "smart". Switches direct network traffic between computers on a single network, while routers can act as the interface between two networks (for example, the Internet and your Local network). There are many explanatory pages on the Internet about it. Here'sa .
Actually, most "routers" sold for home use today incorporate both a switch and a router (and in the case of "wireless routers" also incorporate a wireless access point). Routers include usually a (NAT ) network address translator, also a DHCP Dynamic Host Configuration Protocol (), a proxy of domain name Service (DNS) server, and a hardware firewall to protect the local network from malicious intrusion on the Internet.
Your provider of Internet service through your cable modem, "sees" the WAN port of the router, as a computer (which is) generally configured to automatically obtain its IP address. The ISP's DHCP server assigns this port the only IP address that is allowed to you. It is an 'external' or 'public' IP address, and this is the address that other computers elsewhere on the Internet use when they drive traffic to you.
The router's built-in DHCP server assigns 'private' IP addresses for each of the computers connected to TI (no matter if they are connected by wire or wireless). As a general rule, these are of the form 192.168.1.x or 192.168.0.x, where x goes from 1 to 254. These IP addresses are not 'seen' by computers on the Internet. Instead, the feature NAT on the router directs traffic to your public IP address to the correct of your internal computers (and vice versa).
A switch can't do it all. If your authorized service provider, you can connect to your switch directly to your modem and the ISP's DHCP server assign an IP address publicseparate to each computer connected to the switch. Because your ISP does not allow more than one public IP address from your account, its DHCP server assigns such address to the first computer he sees connected to the switch. If several computers are then connected to the switch, the ISP's DHCP server simply ignores them: too bad, computer #2, you do not get an address, and so you can't connect to the Internet.
-
Hello!
I have a 5515 ASA with the configuration below. I have configure the ASA as remote access with anyconnect VPN server, now my problem is that I can connect but I can not ping.
ASA Version 9.1 (1)
!
ASA host name
domain xxx.xx
names of
local pool VPN_CLIENT_POOL 192.168.12.1 - 192.168.12.254 255.255.255.0 IP mask
!
interface GigabitEthernet0/0
nameif inside
security-level 100
192.168.11.1 IP address 255.255.255.0
!
interface GigabitEthernet0/1
Description Interface_to_VPN
nameif outside
security-level 0
IP 111.222.333.444 255.255.255.240
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 100
192.168.5.1 IP address 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
www.ww domain name
permit same-security-traffic intra-interface
the object of the LAN network
subnet 192.168.11.0 255.255.255.0
LAN description
network of the SSLVPN_POOL object
255.255.255.0 subnet 192.168.12.0
VPN_CLIENT_ACL list standard access allowed 192.168.11.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
management of MTU 1500
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 711.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (exterior, Interior) static source SSLVPN_POOL SSLVPN_POOL static destination LAN LAN
Route outside 0.0.0.0 0.0.0.0 111.222.333.443 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
WebVPN
list of URLS no
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
LOCAL AAA authorization exec
Enable http server
http 192.168.5.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec pmtu aging infinite - the security association
Crypto ca trustpoint ASDM_TrustPoint5
Terminal registration
E-mail [email protected] / * /
name of the object CN = ASA
address-IP 111.222.333.444
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint6
Terminal registration
domain name full vpn.domain.com
E-mail [email protected] / * /
name of the object CN = vpn.domain.com
address-IP 111.222.333.444
pair of keys sslvpn
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_TrustPoint6 certificates
Telnet timeout 5
SSH 192.168.11.0 255.255.255.0 inside
SSH timeout 30
Console timeout 0
No ipv6-vpn-addr-assign aaa
no local ipv6-vpn-addr-assign
192.168.5.2 management - dhcpd addresses 192.168.5.254
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint6 point
WebVPN
allow outside
CSD image disk0:/csd_3.5.2008-k9.pkg
AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
internal VPN_CLIENT_POLICY group policy
VPN_CLIENT_POLICY group policy attributes
WINS server no
value of server DNS 192.168.11.198
VPN - 5 concurrent connections
VPN-session-timeout 480
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_CLIENT_ACL
myComp.local value by default-field
the address value VPN_CLIENT_POOL pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
AnyConnect ssl keepalive 20
time to generate a new key 30 AnyConnect ssl
AnyConnect ssl generate a new method ssl key
AnyConnect client of dpd-interval 30
dpd-interval gateway AnyConnect 30
AnyConnect dtls lzs compression
AnyConnect modules value vpngina
value of customization DfltCustomization
internal IT_POLICY group policy
IT_POLICY group policy attributes
WINS server no
value of server DNS 192.168.11.198
VPN - connections 3
VPN-session-timeout 120
Protocol-tunnel-VPN-client ssl clientless ssl
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_CLIENT_ACL
field default value societe.com
the address value VPN_CLIENT_POOL pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
AnyConnect ssl keepalive 20
AnyConnect dtls lzs compression
value of customization DfltCustomization
username vpnuser password PA$ encrypted $WORD
vpnuser username attributes
VPN-group-policy VPN_CLIENT_POLICY
type of remote access service
Username vpnuser2 password PA$ encrypted $W
username vpnuser2 attributes
type of remote access service
username admin password ADMINPA$ $ encrypted privilege 15
VPN Tunnel-group type remote access
General-attributes of VPN Tunnel-group
address VPN_CLIENT_POOL pool
Group Policy - by default-VPN_CLIENT_POLICY
VPN Tunnel-group webvpn-attributes
the aaa authentication certificate
enable VPN_to_R group-alias
type tunnel-group IT_PROFILE remote access
attributes global-tunnel-group IT_PROFILE
address VPN_CLIENT_POOL pool
Group Policy - by default-IT_POLICY
tunnel-group IT_PROFILE webvpn-attributes
the aaa authentication certificate
enable IT Group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
: end
Help me please! Thank you!
Hello
Please set ACLs to allow ICMP between these two subnets (192.168.11.0 and 192.168.12.0) and check. It should ping. Let me know if it does not work.
Thank you
swap
Maybe you are looking for
-
Qosmio F10: Cannot set up the TV Tuner!
I can't be able to receive any form of TV on my Qosmio F10 signal. I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never act
-
I was wondering if it is possible to convert a table 1 d of the names of resources VISA (COM Ports) and convert them to strings then enter in a ComboBox? I'm hooked on the first part.
-
I deleted some programs via Control Panel and have now lost my trash. How can I get that back?
-
No Audio - after a clean reinstall of Windows XP Edition family
Had a network worm in my computer that McAfee didn't detect. Advised to do a clean reinstall of Windows, for many that lost all audio, my motherboard is made by Foxconn, any ideas how I can find the correct drivers for this problem? Completing all th
-
C:\Windows\SysWow64\CScript.exe appears whenever my computer starts. Is there a way to prevent that from happening?