I can only boot to the Windows 7 operating system
I have installed Windows 7 OS on my macbook air using training camp and the USB key. Now, he can start only Windows operating system. I tried to boot into recovery mode, but the loading bar loads to halfway. I tried to start in safe mode by pressing SHIFT but it starts right in Windows. When I try to start on Mac by pressing option on startup, I get this error and loads in windows instead
http://i.imgur.com/MBtFqJl.jpg
I followed these 2 guides
http://www.howtogeek.com/186907/how-to-install-Windows-on-a-Mac-with-boot-camp/
http://TheNextWeb.com/lifehacks/2012/08/05/install-Windows-7-boot-camp-no-Optica l-drive.
I used daemon tools instead of roxio toast well
I appreciate all the help
I'm sure that I've updated to El Capitan before installing Windows
NVM I fixed it by downloading the drivers of Boot camp for Macbook Air on another computer and ran it on my windows OS
Tags: Windows Software
Similar Questions
-
How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7? I have already reinstalled Windows 7 from the CD, but that has not solved my problems. When I put the factory CD in my CD player, it won't always boot from the CD. When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD. I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.
On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:
How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7? I have already reinstalled Windows 7 from the CD, but that has not solved my problems. When I put the factory CD in my CD player, it won't always boot from the CD. When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.
You must go into the BIOS and change the boot on CD order
first push.How to get into your BIOS? It is not dependent on Windows, but on what he
motherboard/BIOS card that you have. In fact, you need access to the
BIOS before Windows begins to start. A common method is to press
the key delete when you turn on first, but this is not necessarily true
for your computer. Watch the display carefully when you start first;
There is often a message here to tell you what to do. If this is not the case, check
your system documentation or check with your provider. -
I am trying to add itunes to an old computer for my kids. It has the windows xp operating system. When I try to install itunes, I get an error message that says: I'm having problems with my windows installer. I don't have an existing copy of itunes on the computer that would be a new installation. How can I solve the problem? I have a new computer with windows 7 and had no problem with installation on it.
If you can not receive answers that will solve your problem, I would suggest that repost you to...
Cummunities to Support Apple - itunes for Windows:
https://discussions.Apple.com/community/iTunes/itunes_for_windows
-
In the creative cloud applications can be installed on a Windows Vista operating system?
In the creative cloud applications can be installed on a Windows Vista operating system?
You can see the tech specs for any product you are thinking about installing via the page following the link to the software Creative Cloud:
http://www.Adobe.com/products/creativecloud/tech-specs.html#requirements
-
I bought Photoshop elements 13 and did not know that the Windows Vista operating system is not supported. How to exchange the 13 elements of Photoshop for a version of Photoshop that supports the Windows Vista operating system?
Adobe does not sell older versions of their software, the best you could expect if the software will not work on Vista is to get a refund.
Please see return, cancel or Exchange an order - Adobe
http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-
I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.
I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?
Hello
I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
I have 12 items and the Windows 7 operating system. It is not uncommon for me to have a half dozen + copies of a single image. I'm not creating these additional images myself, so must be the system. Deletion (including from the HDD) do not help. Can anyone help please?
1. the only way to image files be automatically added to the catalog is to enable the option "watch folders" in the file menu and choosing not to have the Organizer warn you of any additions. If these files are already in the catalog they should be ignored, only new files should be added.
2. otherwise, there is a downloader option to ignore duplicates when you import from card reader or the camera to avoid importing several times the same card.
The organiser considers that the files are duplicated when they have the same "date taken" and the size in KB.
-
The Windows Vista operating system on dv9000 was arrested.
The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.
How can I get my BONES restored without having to buy a new one?
lbwhorms wrote:
The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.
How can I get my BONES restored without having to buy a new one?
You may need to contact HP in your region or Microsoft by phone.
If he please go through these papers & try the above first steps:
Activation of Windows Vista operating system
Concerning
Visruth
-
Is there a practice of the Windows Server operating system environment?
I'm looking to get some practice with the Windows Server operating system (2008 or other). I came across the downloadable 180 trial period, but I don't mean to create a true server temporarily. I'm looking to be able to have a completely 'virtual world' where I can actually add devices and simulate connect with different computers, etc. I want to create an environment of virtual server completely, not the 180-day trial period where I create an environment that can have real computers to connect to it. Such a thing exists?
For example, I used a program called Packet Tracer that allows me to simulate the addition of routers, switches and high-end devices to create a whole network of Physics in a virtual environment. I can configure devices with IP address and all that I can learn how to build a physical network. I would like to do with the operating system Windows Server if possible.
Thank you.
Hello
It would be preferable to repost the question to the Forum Windows Server help.
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home
Setting up a Test environment
http://TechNet.Microsoft.com/en-us/library/cc747673 (v = WS.10) .aspx
-
I have a hp type copier printer scanner hp 1355. I need a driver (software) for this. If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.
Hey Fed-Up-with-HP,
Try using the brush included in the CD or download. Let me know what you find?
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. run the uninstall_L4 (exe or Bat)
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. run the uninstall_L4 (exe or Bat)
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
-
The last time I asked a question like that, someone made it is perfectly clear that they would not help me to crack a password..., three times. If you have any suggestions that may help me in fact, I'd be in your debt. Otherwise, save your time and ignore all this.
I am trying to perform a repair to the XP operating system. When I try to boot from the CD drive using the original Windows XP disc, I can not connect. It's a dead-end.
When I try to boot from the hard drive, the system reaches a certain point, and then it re-boots. If I just sit and watch, it keeps re-initialization. Strange thing is that recently, I changed the password. I simply do not remember what it is. And, seriously, I have experienced repeated amnesia episodes. The obvious thing to do is to keep my own hand written records..., I only using computers since 1982, before IBM introduced its first PC.
The BIOS provides a way to clean up all the stored passwords? This is where I'm going next.
I apologize for being a little rough. Part of that comes with age.
Jeff
Hello, Jeffrey. I just read one of your other threads. Brian Tillman brings a great point that you missed. The BIOS password (if it still exists) has absolutely NOTHING to do with the other passwords, including those for things like a Windows XP profile.
Unless you have created passwords, while they do not exist. So, if you need to boot from the Windows CD using the Recovery Console, and you are prompted for a password, then chances are that just by pressing the Enter key (indicating an 'empty' or empty password) is all you need to do.
So, if I were you, I would not at all concerned about your BIOS.
In addition, I think you mentioned that you couldn't even see the administrator account. Assuming you have Windows XP Home Edition, this is how it is supposed to be. If you want to see it, you will need boot mode safe. Then you will see. :-)
If you DID create a password and have no idea of what it is, there are tools to reset your password. But I think that people don't post links to these programs in these forums Microsoft (not very well why). But they are easy to find if you use a search engine.
You say that you have recently changed a password, but you did not indicate what it was for. It is important to understand that the built-in Administrator account is NOT the same as another account that you are using happens to have administrator privileges. And assuming that you never set a password for the built-in Administrator account, so if you are using the Recovery Console, everything you need to do is press the Enter key.
HTH.
-
Why I can't install iTunes on my laptop with the Window 10 operating system
Why I can't install iTunes on my labtop with Window 10 operating system
Have you downloaded the latest iTunes from here and correct version
and then run the downloaded installer.
-
I can't backup DVD for Windows Vista operating system due to the error of 0x8007001B
I can't finish a DVD upward on my Windows Vista operating system. This is due to an 0x8007001B error code. I was unable to complete the fix to services.msu
Hi mine,
This isn't a question of MSE - there is a problem with Vista or your computer or your software backup or your DVD player or its drivers or something else. We are not the right people to answer your question and give you the best possible options and solutions - you have to talk to the experts.
Please repost at: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system?page=1&tab=all&tm=1304884961900 where specialists who understand and focus to help with these issues will be more than happy to help you.
Although not my area of expertise (and you're welcome to ignore it and just after to the other forum), I did do research in any case and believe that the problem involves the corruption on your hard drive (although I could certainly be wrong - it is more likely to be the case if the full error message includes "drive cannot find sector requested" but you don't get the full error message, so I don't know). To try to fix it, if that is the problem, follow these steps:
Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.
While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.
If this does not work, test better clean your hard drive. To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287). If it passes the tests, there's probably nothing wrong with it and you must do to the other support forum. If it fails, which include in your post on the other forum and let them advise you how to proceed.
I hope that the above solves the problem. If this isn't the case, I am confident, they can help you in the other forum, because that's what they specialize in. It would help if you posted the message Word for Word that is accurate and complete, including all codes. In addition, it would help them if you explain the difficulty you mention services involving (a link to the site where you found the solution or at least what exactly you did and what has happened or not happened when you tried). And if you've tried my suggestions above, include the results in your message (so they don't ask you to do it again and will be able to exclude).
Good luck and best wishes!
-
I have an attached PNY 8 GB USB 2.0 Flash Drive that works perfectly on Windows XP. But when I try to use it on a Windows 7 operating system, it is very few recognized by Windows 7. I mean at least, is that when I look for the device by exploring 'Computer' in the menu start the device does not appear at ALL. However, when I go to control panel-> hardware and sound-> devices and printers, it shows a device called "DISK 2.0" which I believe are 'minimum' recognition of this 8GB flash drive, I was talking about. Can someone help me get the recognition for this camera on Windows 7? Thank you.
Edit: I noticed in Device Manager-> USB MASS STORAGE DEVICE-> Propteries the following for my optical mouse Microsoft and the PNY 8 GB flash drive
The Microsoft Optical mouse is the location: Port_ #0001.Hub_ #0004
On the MagicJack (USB Composite device) is the location: Port_ #0002.Hub_ #0007
On the flash drive is the location: 0000.001d.0002.002.000.000.000.000.000
3rd place property looks pretty weird (Im assuming that third location data for the flash player, since the only other USB devices are my Microsft mouse and the MagicJack I know is a composite device, but I'm wrong. AMD Athlon 64 3200 + 1GIG memory ATI Radeon X800XL 250gig W.D. hard drive
An automatic Microsoft Windows update fixed my problem with this specific long ago PNY USB flash drive. It has been set at least the last 6 months or more.
-
After the widows Vista operating system upgrade my Dell AXIM 5 PC Pocket can be not sync with my office. Old software active sync is not compatible with Windows Vista. At my pocket PC eventually become outdated.
Hello ariccia473,
Click the link for Mobile synchronization and see if your Pocket Pc works with the Mobile Sync 6.1.
http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspxIf this isn't the case, then you will need to check with Dell and see if they can be of support.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
I started a download and the download has stopped, and now I can't reactivate it. The reason why the download has been interrupted was an independent error.
-
CQ50-139wm upgrade ram and windows 7 to 4gig is possible
-
Outlook sends a message to (three games) when I have a PDF attachment?
Outlook express will send my email in three parts (or three different emails) when I have a PDF attachmet, is there something I can do to prevent this in Outlook express?
-
I insert a CD in the drawer, he reads a program/artist quite different than what I insert
I inserted a CD titled 'Andean Fusion'... the Media Player Eurorest and tracks played Perry Como, even allowed me to burn a CD from him. What is going on? I tried to use Real Player, it appears appropriate information
-
How can I get my account HP Connect give me credit for the pages that they have counted print which did not actually print because the computer did not communicate on the printer correctly.