I can ping guest-guest, but cannot telnet comments-comments
Hello
I have 3 VMs installed on my Windows 7 - Linux, Linux and Windows-7 host computer. Configuration of the network is NAT for all virtual machines. I added all the names of host hosts 3 hosts file all 4 machine. I can ping any one of these machines to any machine. But when I try to telnet to a linux computer virtual to another linux VM, I get the error message "no route to host".
My goal is not not to run telnet but to check network connectivity. A linux machine has installed oracle database while the other linux machine has SQL customer demand. I can't do the SQL client to connect to the database on the other machine.
Maybe I'm approaching it from the wrong angle. Any help would be appreciated.
Maybee your nc behaves a little different from mine, the "... message was successful" will appear when I use - c. - z unreleased product, the only way to know if she did or didn't connect is by looking at the exit code. But is not serious.
It finally hit me, another way to not get a "no route to host" - even if it is of course one - is if the host rejects the connection with a host/port ICMP unreachable. That must be it. The Cabinet of the oracle should be a firewall active and you must get to allow connections to port 1521.
I really should have thought of that earlier: S guess I'm used to firewall using tcp-reset...
Tags: VMware
Similar Questions
-
I can ping external IPs, but cannot browse Internet on Cisco 897VA sites
I have a cisco 897va router I use a laboratory. I have a very basic config and am able to ping Web sites but for some reason any cannot browse one of them while connected to this router. The way it is currently Setup is port Gigabit 8 (WAN port) is connected to one of the switchports on my linksys router (connected to the cable modem), and I have a computer connected to the switchport Gigabit router 897VA Ccisco 0. Interface Vlan 1 is configured as my default gateway with the ip address of 192.168.1.1/24. I have a pool dhcp with the implemented network 192.168.1.0/24 which clients receive the ip configuration. I'd appreciate any advice someone here can provide. Here is my config. I took off with a default interfaces (no) configurations in them for ease of reading:
C897VA #show run
Building configuration...
Current configuration: 1985 bytes
!
! 19:14:01 EST configuration was last modified Sunday, December 1, 2013
! NVRAM config update at 19:14:06 EST Sunday, December 1, 2013
! NVRAM config update at 19:14:06 EST Sunday, December 1, 2013
version 15.2
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
sequence numbers service
!
hostname C897VA
!
boot-start-marker
boot-end-marker
!
!
!
No aaa new-model
clock timezone IS - 5 0
Crypto pki token removal timeout default 0
!
!
no ip source route
the 5 IP auth-proxy max-login-attempts
max-login-attempts of the IP 5 admission
!
!
!
IP dhcp excluded-address 192.168.1.0 192.168.1.5
!
IP dhcp INTERNAL pool
import all
network 192.168.1.0 255.255.255.0
default router 192.168.1.1
domain cedanolab.com
Server DNS 8.8.8.8 4.2.2.2 4.2.2.3
!
!
8.8.8.8 IP name-server
IP cef
!
!
udi pid C897VA-M-K9 sn license *.
!
!
!
VDSL controller 0
!
!
!
ATM0 interface
no ip address
No atm ilmi-keepalive
!
interface Ethernet0
no ip address
!
interface GigabitEthernet0
no ip address
!
!
interface GigabitEthernet8
DHCP IP address
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
!
interface Vlan1
IP 192.168.1.1 255.255.255.0
no ip redirection
no ip proxy-arp
IP nat inside
IP virtual-reassembly in
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
the IP nat inside source 1 list overload of the GigabitEthernet8 interface
!
access-list 1 permit 192.168.1.0 0.0.0.255
!
!
Line con 0
Synchronous recording
line to 0
line vty 0 4
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
!
end
C897VA #.
Thank you in advance.
Jeremias,
If I understand you correctly, the PC connected to the Cisco router can resolve names to IP addresses and is able to ping outside the destination, but you can not browse the internet. Is this correct?
I think an MTU problem. Even if your router connects Ethernet segments only, there may be an additional encapsulation somewhere along the way, by adding an extra burden to your packages and possibly causing them to become oversized. Can you try to add the ip tcp adjust-mss 1360 to your interface Vlan1 please and test connectivity again?
Also, what exact IP address you receive via DHCP on your GigabitEthernet8 interface? Ideally, can you like after the output of the show ip route and show ip cef between your Cisco router? Also, please include the output of commands show ip cef 8.8.8.8 detail .
Best regards
Peter
-
Firefox is my main browser. I have often to create and share spreadsheets Google Doc. All of a sudden, when I run one of my Google Docs, I can see the data but cannot make changes. Even an attempt to click a cell and type something (or change a format) receives no response.
I tried to use Safari and IE, and the problem is is NOT manifested in these browsers.
Wow! Starting Firefox in SafeMode circumvented the problem. I was able to edit the worksheet.
Thank you!
I now begin the troubleshooting process, as you suggested. I'll report my findings.Thank you.
-
I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?
[moved]
I had the same problem 2 weeks while in the Mexico. I contacted the support TWC and the person to whom I spoke said he had to unlock something. When he did, all my mail came in Outlook in the spam folder. It was OK because I got my mail.
I moved to a different House and now have the same problem again. I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage. He has not found anything by the previous call that guided him by setting this time. He said that he would open a ticket and call me in the next 24 to 48 hours.
Is it reminds and solves the problem, I'll post how it was corrected.
Amigos audio!
-
can run sys.dbms_crypto - but cannot run without schema name dbms_crypto
Hi all
I can run sys.dbms_crypto - but cannot run dbms_crypto without schema name.
Example:
Select rawtohex (sys.dbms_crypto.hash (utl_raw.cast_to_raw (UPPER ('LUCKY10')), 2)) as the double md5_64_pw
works
Select rawtohex (dbms_crypto.hash (utl_raw.cast_to_raw (UPPER ('LUCKY10')), 2)) as the double md5_64_pw
does not work
How can I fix it?
Public synonym exists:
Select * from all_synonyms where synonym_name = 'DBMS_CRYPTO' and owner = 'PUBLIC '.
PUBLIC DBMS_CRYPTO SYS DBMS_CRYPTO
Select * from version $ v
Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE Production 11.2.0.2.0
AMT for 64-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Then, most likely, user you are logged in as a object named DBMS_CRYPTO:
Select * from user_objects where object_name = 'DBMS_CRYPTO;
And "does not work" is not very descriptive. Are you an error? If so, please post.
SY.
-
Host Windows 7: Win XP Pro SP 3 comments: comments can ping hosts Internet but IE
Problem: The customer is impossible to browse Internet hosts. This virtual machine works great under Vista with the same version of VMWorkstation.
Attempts to debug: take mail.yahoo.com. I can ping. But accessing http://mail.yahoo.com/ fails according to the and he tries so a search MSN and of course breaks down, too.
C:\Documents and Settings\Administrateur & gt; ipconfig/all
Windows IP configuration
Name of the host...: squidney-cafdd0
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: localdomain
Ethernet connection to the Local network card:
The connection-specific DNS suffix. : localdomain
... Description: VMware accelerated AMD PCNet Adapter
Physical address.... : 00-0C-29-E8-C0-C8
DHCP active...: Yes
Autoconfiguration enabled...: Yes
... The IP address: 192.168.203.129
... Subnet mask: 255.255.255.0.
... Default gateway. : 192.168.203.2.
DHCP server...: 192.168.203.254
DNS servers...: 192.168.203.2.
Primary WINS server...: 192.168.203.2
Lease obtained...: Sunday, June 21, 2009 20:02:54
End of the lease...: Sunday, June 21, 2009 20:32:54
C:\Documents and Settings\Administrateur & gt;
Host: Windows 7 RC - Version 6.1.7100
Client: Windows XP Pro SP 3 - Version 5.1.2600
VMWorkstation version: 6.5 build - 156735
Guest network: NAT
Driver comments: VMware Accelerated AMD PCNet Adapter
VMX file is attached
vmsupport file is attached.
Try to change your guest of NAT network to bridged.
-
Windows Vista machines can see XP machines but cannot communicate with them.
original title: VISTA machine can see XP machines in local network, cannot connect
I have a 3 computer home network that has worked very well for many years, but it is usually just used by 3 machines to access the Internet. Very rarely a computer does enter a file out of one of the other machines, but this feature has certainly worked in the past.
Machine 1: Desktop/VISTA/setting up a connection to the router
Machine 2: Desktop/XP/setting up a connection to the router
Machine 3: Computer connection laptop/XP/wireless to the router
All the machines, automatic update of Windows and all the computers are running Norton Security Suite, which is also updated automatically. Norton Security Suite is a relatively new introduction to the network.
2 XP machines see that all 3 computers in the network each has access to the other. 2 XP machines can not "reach" the VISTA ("the network path was not found") which could be correct, because machine that I never shared something on this machine, although sharing file and printer sharing * are * on.
On the VISTA machine click on network and sharing Center and then see the full plan shows 3 machines in the group. But, then clicking on view computers and devices results in the network window, which shows that the VISTA as a computer machine and a media device. No XP computer to connect to.
The VISTA machine can ping machines (Machine 2 ping or ping Machine 3) XP, but XP machines can't ping the VISTA. In fact, it's quite strange; If I 'ping Machine 1' of one of the machines XP ping command reports "Pinging Machine 1. (Name of working group) "[208.68.143.50] with 32 bytes of data", then he received 4 requests, responses has expired. I have no idea where this name - the name of my PC added on behalf of the Working Group - and the IP address belongs to a computer somewhere in Massachusetts! (I'm in California).
Rattling of the VISTA machine using its IP internal, as reported by the router just translates into 4 requests, responses has expired.
I worked on it for hours now, after trying all of the 'standard' patches with no improvement. Given the Windows error message when one of the XP machines trying to access the VISTA - "the path not found network" machine as opposed to they access denied response - and the ping odd response when you use the name of the machine, I have the feeling that the things in the list of standard control is not the problem.
Any thoughts?
Tom Young
I finally reduced to the Norton Security Suite firewall. Don't think that was the issue that the 2 XP machines are also running Norton Security Suite and is working very well. Penetrating machines XP 2 'Total confidence' confidence level - which doesn't seem to be necessary according to the news 'aid' to Norton that I read over and over again - cured the problem.
Tom Young
-
E4200 can turn it on, but cannot connect
So, naturally, I've had this router for over a year now so the warranty is out and it is to stop working last night. I'm pretty decent in the world of router, since I'm studying for my CCNA, so I tried just about anything imaginable. I woke up this morning without connection, checked the modem, then the router. The router is turned on, but lights up/downstream were not doing a thing. The modem is not the issue (I'm wired right now). I tried both resets, including unplugging and still cannot get an answer out of him. The logo lights up directly (not a fad in and out as it is supposed to) and then it does absolutely nothing. I never met such a problem on a home router before. I can not connect to the router either, I feel helpless and stuck. And I really don't want to give up now because I paid a good amount of money on this thing.
If anyone has experienced this before? I have a feeling that the Interior can be fried on , but he was always on a desk with nothing prevent ventilation.
Any ideas to tackle this problem would be greatly appreciated.
Thank you in advance!
Looks like it's time for a new router hey you is not alone, I had the e4200, ea4500 and the ea6500 EACH of them never worked right. I'm lucky that I was able to come back to them all for a refund full and picked the netgear R6300 and all my problems are solved router workes as shown in contrast to Cisco. I don't want be negitive but I call it as I see new cisco routers will not work and they don't last buy another brand and vote with your wallet and stop feeding this money from the company for a * beep * product. Good luck!!
(Note to mod: under the guidance of the compliance of the directive.)
-
my e-mailno reciving plu or junk email - I can send e-mail but cannot receive any
I can send emails but cannot receive any
See www.oehelp.com/OETips.aspx#3 . Try to remove your email account, compact and repair the database (see www.oehelp.com/WMUTil/), and to add your account mail back again.
Steve
-
All of the pdf files I've downloaded on my desktop (Windows 7) suddenly "disappeared." I can open and view them, but cannot remove them or move them to another file. When I try to delete, I get a message saying my trial has expired and he wants me to buy which I can't do because I don't have a serial number to put in. What happened to the "free" Adobe Reader I thought I had? How can I get these PDF files to become mobile?
You (or someone) downloaded the free demo of Acrobat Pro, a little more than a month. If you use this software $20 / free months instead of drive for a month. If you don't want to buy it, now you must uninstall it and go back to the use of Acrobat Reader.
-
OfficeJet Pro 8600 Plus can print Word documents, but cannot print from web sites
My daughter has an Officejet Pro 8600 more. She uses it with his Macbook Pro. She says she can print word documents, but when it tries to print something on a website everything that comes out of the printer are blank pages.
Anyone know what this is all about?
Yes, it is sometimes easier to just go with what works
-
I use Bridge network. I tried to delete and recreate the NIC (did not help). I've upgraded to the latest version of VMware Server (20.0.0 build 122589) with the same result. Stub here. Anyone have any ideas? Thank you.
What is your host and guest operating system? Are WHAT NIC configured correctly (IP, DNS, gateway, etc.).
Are all necessary ports (firewall, antyvir)?
J.
-
Network card is Linksyswireless - B usb adapter V2.8 #2 outskirts... linksys E1000 router is. .... XP with service pack 3
Complete the message, please, without paraphrasing. Also explain what you mean by 'connect... as a guest' and 'normal network.
You have a relatively new wireless-n (which is capable of WPA2) router and an ancient wireless adapter.
I'm sure that your 'wireless-B usb adapter V2.8 #2' network is in fact a WUSB11
The latest driver for the WUSB11 version 2.8 (from June 2004) actually supports WPA (although not WPA2, which is the preferred level of wireless encryption today). Download here: http://homedownloads.cisco.com/downloads/driver/1224638362253/WUSB11-v2.8_dr.zip
User Guide and quick start for your WUSB11 v. 2.8 are here (click on the downloads button)
You should really consider getting a wireless n adapter. It would be much faster, but also much safer.
-
Hello!
I have a 5515 ASA with the configuration below. I have configure the ASA as remote access with anyconnect VPN server, now my problem is that I can connect but I can not ping.
ASA Version 9.1 (1)
!
ASA host name
domain xxx.xx
names of
local pool VPN_CLIENT_POOL 192.168.12.1 - 192.168.12.254 255.255.255.0 IP mask
!
interface GigabitEthernet0/0
nameif inside
security-level 100
192.168.11.1 IP address 255.255.255.0
!
interface GigabitEthernet0/1
Description Interface_to_VPN
nameif outside
security-level 0
IP 111.222.333.444 255.255.255.240
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 100
192.168.5.1 IP address 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
www.ww domain name
permit same-security-traffic intra-interface
the object of the LAN network
subnet 192.168.11.0 255.255.255.0
LAN description
network of the SSLVPN_POOL object
255.255.255.0 subnet 192.168.12.0
VPN_CLIENT_ACL list standard access allowed 192.168.11.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
management of MTU 1500
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 711.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (exterior, Interior) static source SSLVPN_POOL SSLVPN_POOL static destination LAN LAN
Route outside 0.0.0.0 0.0.0.0 111.222.333.443 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
WebVPN
list of URLS no
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
LOCAL AAA authorization exec
Enable http server
http 192.168.5.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec pmtu aging infinite - the security association
Crypto ca trustpoint ASDM_TrustPoint5
Terminal registration
E-mail [email protected] / * /
name of the object CN = ASA
address-IP 111.222.333.444
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint6
Terminal registration
domain name full vpn.domain.com
E-mail [email protected] / * /
name of the object CN = vpn.domain.com
address-IP 111.222.333.444
pair of keys sslvpn
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_TrustPoint6 certificates
Telnet timeout 5
SSH 192.168.11.0 255.255.255.0 inside
SSH timeout 30
Console timeout 0
No ipv6-vpn-addr-assign aaa
no local ipv6-vpn-addr-assign
192.168.5.2 management - dhcpd addresses 192.168.5.254
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint6 point
WebVPN
allow outside
CSD image disk0:/csd_3.5.2008-k9.pkg
AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
internal VPN_CLIENT_POLICY group policy
VPN_CLIENT_POLICY group policy attributes
WINS server no
value of server DNS 192.168.11.198
VPN - 5 concurrent connections
VPN-session-timeout 480
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_CLIENT_ACL
myComp.local value by default-field
the address value VPN_CLIENT_POOL pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
AnyConnect ssl keepalive 20
time to generate a new key 30 AnyConnect ssl
AnyConnect ssl generate a new method ssl key
AnyConnect client of dpd-interval 30
dpd-interval gateway AnyConnect 30
AnyConnect dtls lzs compression
AnyConnect modules value vpngina
value of customization DfltCustomization
internal IT_POLICY group policy
IT_POLICY group policy attributes
WINS server no
value of server DNS 192.168.11.198
VPN - connections 3
VPN-session-timeout 120
Protocol-tunnel-VPN-client ssl clientless ssl
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_CLIENT_ACL
field default value societe.com
the address value VPN_CLIENT_POOL pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
AnyConnect ssl keepalive 20
AnyConnect dtls lzs compression
value of customization DfltCustomization
username vpnuser password PA$ encrypted $WORD
vpnuser username attributes
VPN-group-policy VPN_CLIENT_POLICY
type of remote access service
Username vpnuser2 password PA$ encrypted $W
username vpnuser2 attributes
type of remote access service
username admin password ADMINPA$ $ encrypted privilege 15
VPN Tunnel-group type remote access
General-attributes of VPN Tunnel-group
address VPN_CLIENT_POOL pool
Group Policy - by default-VPN_CLIENT_POLICY
VPN Tunnel-group webvpn-attributes
the aaa authentication certificate
enable VPN_to_R group-alias
type tunnel-group IT_PROFILE remote access
attributes global-tunnel-group IT_PROFILE
address VPN_CLIENT_POOL pool
Group Policy - by default-IT_POLICY
tunnel-group IT_PROFILE webvpn-attributes
the aaa authentication certificate
enable IT Group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
: end
Help me please! Thank you!
Hello
Please set ACLs to allow ICMP between these two subnets (192.168.11.0 and 192.168.12.0) and check. It should ping. Let me know if it does not work.
Thank you
swap
-
CAN OPEN & EDIT FILES, BUT CANNOT BE SAVED ON THE NETWORK PC (WIN7 - WINXP)
Hello.
1. I can open and edit a file in the main pc (Win7) pc (WinXP) another, but I couldn't save it. When I try to save an alert box pop up saying that the file I want to save is read-only.
"" file.xls"is read-only. To save a copy, click OK, and give the workbook a new name in the dialog box save as. "
How do I fix this so I can save it in the original location?
--------
2 - in the main pc (Win7). I try to create a new docs but it wont.
"Cannot create the file 'New document texte.txt'. Access is denied. "
--------
3. not copy a file of pc (Win7) main pc (WinXP).
"Source file: C:\xxx\User\My Documents\yyy.xls"
Target file: Z:\xxx\yyy.xls
The system cannot find the specified file. "Help, please.
Note: WinXp pc is connected to the Win7 pc across a network.
Hi Laurent,.
Thanks for posting your question in the Microsoft community forum!
I understand that you have a problem with the opening and editing of files on the network in Windows 7. I will try to help you with this.
(1) did you make any changes before the show?
(2) you are the administrator of the computers?
(3) are protected files?
Advanced sharing permission
1. in Windows 7, right click on the shared folder and then click Properties.
2. click on the sharing tab, click Advanced sharing. Check this file share.
3. click on the permissions button, click Add.
4. highlight the account that you want to share this folder to (name of account that will have access to the file), and then check the box allow for total control.
5. If the name of the account is not listed, please click on the Add button. Type everyone, and then click OK.
6. click on all members of the list of users and check the allow full control check box in the "Permissions for everyone" pane and click on apply, click OK.
See the link below and follow the steps to set up a home network. You can set up a network between your two computers and share files between them.
Share files:
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
"Access denied" or other errors in the access to or work with files and folders in Windows
http://support.Microsoft.com/kb/2623670
File sharing essential:
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials
http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders
Sharing of files and printers
Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.
Maybe you are looking for
-
allows copy and paste from word to my school program
When I create a word document and the attempt to copy and paste in my discussion of the College, it indicates that Mozilla does not allow me to do and communicate with firefox to release restrictions.
-
the use of the tape of taps to store data on this subject, thank you.?
Hello Sir/Madam... Please, I like to know how to record or store a file or a small programs on a K7 to my macbook?, and what kind of tape recorders for cassettes should I also use cables and? and how to open files such as text files or image or any s
-
I can't remove it frome my bases of microsoft pc security
I tried the control panal keeps running it won't go away
-
XP service pack 3. installation of exFAT. Recognition of SDXC card
I'm trying to download files from a card SDXC 64 GB to my PC running Windows XP SP3 by using a card reader SDXC and directly from my SDXC compatible camera. After investigating the causes of the failure I downloaded the file: WindowsXP-KB985704 - x
-
I want to print different playlists that I use in Media Player 11, but there is no print option in Media Player See you soonWakdos