I can log on to a wireless network in as a guest, but cannot log on to the normal network. Linksys seems to think that my XP needs a fix of WPA security?

Similar Questions

• I can't connect to my wireless network.

  I can't connect to my wireless network.
  I pressed the FN + F8 combination keys and a box will appear briefly on the screen then disaappears quickly.
  I don't have time to click on anything, and also a message said that I have no network connection.

  I disabled my firewall on a case where this caused a problem.
  Can someone please

  Hello

  > I pressed the FN + F8 combination keys and a box appears briefly on the screen, then disappears quickly

  This is nothing unusual. You need to pass only to the WLan and then disappear the wishes of the box! There is nothing wrong.

  First, you must activate the WLan switch on the side of cell phones! Then use the FN + F8 key to switch to the WLan.
  Then use the configuration Windows own option or a 3rd party WLan client configuration tool like Atheros or Intel ProSet utility. But it depends on the WLan card manufacture what utility can be used!

  Then set the right settings such as the SSID, password encryption, etc.
  If you have set all right should then work!

• What can I do when my wireless network displays wzc871122

  I can't connect to a wireless network, a message to configure wzc 871122 what can do?

  Hi Joseluis7819,

  · What is the full error message that you receive?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  · What is the edition of windows installed?

  Run the fix it from the link below and check off: error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition Wireless: http://support.microsoft.com/kb/871122

  For reference: network of two resources to solve connection problems in Windows XP: http://support.microsoft.com/kb/313242

• I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8

  I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8. I have a toshiba laptop, and there is no switch on the side of my computer what is expected? Help someone?

  Hello

  My older Toshiba has a power switch WiFi.

  My new Toshiba has a WiFi switch above the F keys, although I do not know which varies
  by model. So check with Toshiba support, their documentation online and drivers, and
  ask in their forums where there will be others with the same model.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hello! I'm having a problem to open a session on creative cloud. I can log on to the page on the site, but when I try to download a product, the e-mail message that is broadcast, it is an email from my ex-boyfriend, and I just can't change it! So I'm not

  Hello! I'm having a problem to open a session on creative cloud. I can log on to the page on the site, but when I try to download a product, the e-mail message that is broadcast, it is an email from my ex-boyfriend, and I just can't change it! I'm not able to buy a product! Could you help me, please?

  Quit Adobe Creative Cloud app.

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > OOBE. Open the OOBE folder and Opm.db bin file.

  Once you had trashed Opm.db file, restart the Adobe Creative Cloud app and check.

• I can log on to the site to download anyone know why?

  I can log on to the site to download anyone know why?

  It does not take a second or two to the list of countries is filled.  Try to empty your cach and try again.

• I managed to uninstall my acrobat pro, but my adobe application manager seems to think that I still have it. I do not see how to download it from adobe and re install. Can anyone help? I spent many hours trying to get my creative cloud version

  I managed to uninstall my acrobat pro, but my adobe application manager seems to think that I still have it. I do not see how to download it from adobe and re install. Can anyone help? I spent many hours trying to get my creative cloud version to run after the license of first years has failed. It was a bit of a nightmare and sie Adobe is not easy to get help from.

  I spent a few hours trying to untangle a redemption code. I dropped so uninstalled acrobat, because he is no longer works apparently.  I managed to find out how to buy a new redemption code for creative cloud through the Institute where I exposed, but now I can't get a download for my acrobat, one that will work on my macbook pro 2010 running 10.6.8

  Navigation in the adobe site was not easy and not very impressed in terms of achieving support for the problems and responses so far. Only no reply emails usually that means logging in time and time again.

  LTA

  Thanks to all of you who tried to help him. I thank can I have managed to sort it out.  It seems that I can not have uninstalled initially, but I could not access the program and all my pdfs, opens in preview.  I found another uninstall program that seems to have done the trick as my adobe application manager is now let me download.

  I hope it will do the trick and my thanks to all who responded. Bravo guys. I hope that I won't make the same mistake next year ;-)

• For several months now I can't run Adobe Creative Cloud... ripetutamente I downloaded but won't... the system tells me to uninstall because the program is in ruins, but the time I tried to uninstall it is me, it's impossible because it's co

  For several months now I can't run Adobe Creative Cloud... ripetutamente I downloaded but won't... the system tells me to uninstall because program is in ruins, but the time I try to uninstall it is me, it is impossible because it is connected to other systems!

  uninstall the application of cc desktop, uninstall the Adobe Creative Cloud desktop application

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

• can I put a pci wireless network adapter in my hp pavilion ze4210?

  had a used laptop and I am trying to make it as good as possible. through usb wireless internet adapter. If possible, I would like to put a wireless card inside, so I don't have the USB that comes out of the back. any help is greatly appreciated!

  Hello:

  You may be able to.

  Here is the link to the service manual.

  http://h10032.www1.HP.com/CTG/manual/bph08402.PDF

  Remove the battery and the a/c power before you open the PC.

  Please refer to Chapter 2, page 2-6 for the location of the wireless card.

  If there are two antenna cables in the compartment, you'll be able to add a wireless card, but it may be that in the list of the parts on page 4-11 (map, mini-PCI-802. 11b worldwide, part # 319468-002).

  Wireless B (11 Mbit/s) only, and if you have a newer router for the past two years or so there is a good chance that it does connect, because drivers will be too old.

  This is the cheapest I could find.  See if you can find one cheaper. Find the number of piece only.

  http://www.eBay.com/ITM/319468-002-HP-Compaq-CPQ-Mini-PCI-card-802-11b-WW-W-/280810262340?PT=LH_DefaultDomain_0&hash=item4161988f44

  Installation of any other card WLAN but the one above, will result in the laptop is not cranking up what the card does not support is removed.

  If there is no antennas in the compartment, I wouldn't waste my time. You will need to disassemble the entire notebook including the screen to run the antennae through the phone.

  Paul

• I can't activate my Dell Wireless NETWORK card.

  It says it is disabled and that I have to press a switch, but I can't find any switch on my computer.  It is an internal card and my laptop only 1.5 years.  However, I have no support from dell more via internet or e-mail and I'm in Israel for 2 months, so I can't call.  I tried Fn + F2, but that no longer works.  Randomly, it only works WHILE I was on the internet using the wireless feature. I think that it failed because the router but the router working again and my laptop is not yet. Help, please!

  Hello

  Connect to the laptop support page.

  Download the manual and search for instructions how to activate the wireless card.

  Also look at the BIOS, it could be that he got disable it too.

• How can I display characters in 'Wireless Network Connection' - &#62; 'Properties' when the checkbox "show characters" is grayed out?

  How to display hidden characters in the Properties tab, in the connection, that I am using, under the wireless network connection box when that I should be able to check box is greyed out and unclickable?

  Also NOTE: When you try to use ctrl-p method, a ctrl-v, at the point where you click the box of characters on that he blanks.

  Hello

  You are connected to a domain?

  If the show characters check box is grayed out, the network, or the computer may be restricted by a group or local policy.

  If this computer is connected to a working network, I suggest you contact your help desk or IT Department.

  Concerning

• All of a sudden, I can't print to my wireless network.

  I have a wireless printer Artisan 810 with a desktop connected to the router.  I have two laptops connected wirelessly to the router.  I had everything installed and works very well for two or three weeks about.  Now, impressions of a laptop and desktop prints, but all of a sudden the other laptop will not be printed.  I reinstalled the software three times, but I get a ball "cannot print document."  Any ideas?  BTW, I am running XP on this laptop (Inspiron 9300).

  Thank you

  Chris

  Hello

  Configure the printer with a static IP that is out of the Routewr DHCP (or use IP reservation if your router supports).

  Then adjust the address for printing on computers (extended network printer manual should explain this process for your printer).

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I'm trying to set up a wireless network and it is said that something does not work with the driver.

  Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

  Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
  Thank you
  original title: I hope someone can help technophobe

  It is said that there is something not working only not with the driver

  You probably need to install some network drivers for your wireless card.

  Download drivers

  Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Establishment of a network domestic:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  For more information network:

  Start here to set up a home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  What do I need to connect to Internet:

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

  Adding a wireless computer

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

  1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

  2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Manually add a wireless computer

  1. sign the computer.

  2 open the connect to a network by clicking the network icon in the notification area.

  3. choose the network wireless from the list that appears and then click on connect.

  4. type the network security key or password if you are prompted to do so, and then click OK.

  -You will see a confirmation message when you are connected to the network.

  5. to confirm that you have added to the computer, follow these steps:

  -Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

• Can use ePrint Officejet 6500 E710a-f and EWS, but cannot be installed on the network

  Hello

  First of all, thanks in advance for any help you can give me.

  Us have just got an Officejet 6500 E710a-f and I would use it on our network. Unfortunately, none of our computers seems to be able to find it (Windows XP, Vista and OSX 10.5.8). On Vista and OSX machines, firewalls are permanently off. The XP machine is a laptop to work on that I have no control.

  My first thought was that it was our somewhat strange network configuration; the printer is connected, but I plugged it on an Apple Airport Express ethernet port so that it works as a bridge for the printer on our wireless network. However, the printer appears in the list of connected devices to the router and the impression of the State of the network said that everything is fine. I can reach the Web server integrated for the printer, go to the printer to get sudoku online and other via applications and, most strangely, I can email jobs him via ePrint perfectly happy.

  Any ideas?

  Thank you

  Suddy.

  Now I tried to connect the printer directly on our router and it worked perfectly. I then tried to have a look at the parameters in the Airport Express, but got an error I did a factory reset on the subject. Low and behold, the printer is connected to our network wireless via AE now works fine.

  Sorry for wasting your time, it seems that this must have been questionable configuration throughout. I just thought that since the printer could see the internet through EI, so the connection should be fine. I'm still not actually.

  Thank you.

• Can access VCSA with the root account, but cannot access vSphere with the same root account

  I am able to connect to the VCSA (: 5480) with the created password for root, but I can't log in vSphere (: 9443) with this same root account).  It seems that the password has been correctly set, but weird that I can connect to one and not the other.  I recently improved bed and breakfast ESXi and VCSA version 5.5 Update 2, but don't think that should have an effect on.  Any suggestions?  Help, please.

  Understand the problem.  When you change the field by default to another identity source, you must type root@localos as the user name to use the root account.