I can't access TCP/IPv4

Similar Questions

• How can I activate the TCP/IPv4 properties button?

  Hello everyone, I am trying to solve a problem on my Windows 7 netbook. When I run ipconfig he returned only this line "IP Configuration of Windows" with later data. When I go to the wireless adapter and select Protocol Internet Version 4 (TCP/IPv4), the properties button is disabled. I unchecked the IPv6 checkbox. The wireless adapter is connected to the WiFi hotspot, but the status is not 'connected' for IPv4 and IPv6 connectivity connectivity. I already used the netsh command to reset the interfaces by this link ( http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/tcpipv4-properties-button-disabled/347899fa-b60a-40a3-ad2c-78ef5e0dca37 ). I also have the same problem with my Wired NETWORK card. Please can someone configure me this adapter to get a static IPv4 address or via DHCP?

  -Also reset the TCP/IP stack via (http://support.microsoft.com/kb/299357?wa=wsignin1.0#letmefixit )

  -Also tried re-installing the drivers (http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/the-tcp-ip-v4-protocol-for-the-built-in-wireless/a28c5096-d1c4-4cc4-ab56-236a163e3a96 )

  I had the same problem.

  I noticed that the button of properties available on the network security mode. So I started to disable suspicious services then I found the problem: his "Service to safety nut.

  Doing some research, I discovered that it comes with adware 'Movies Toolbar'. Even if you uninstall the "Toolbar Movies", "The safety nut" always running.

  To uninstall it just open services.msc, double click on 'Service of safety nut' and change the Startup Type to disable, and then restart Windows. When Windows are online again, the button of properties will be available and the safety nut will no longer appear on the services.

  It will be useful.

• LLTP responder and TCP/IPv4 for SP3 upgrade

  I downloaded SP3... and it works very well... but it has not installed perturb or TCP/IPV4... I tried to install the perturb topology after you install SP3, but because I have already installed SP3, Microsoft say I don't need to install the perturb topology... So I'm puzzled!

  What can I please!

  Edit...  Can I somehow install topology perturb, (KB file) separately without removing SP3... That would be my preferred method...

  Thanks in advance

  See you soon

  The perturb topology LLTD Responder (Discovery) for Windows XP SP3 is available for download here .

  TCP/IPv4 is a standard part of all versions of Windows XP, and it appears in the connection network under Internet Protocol (TCP/IP) properties.  If you have access to your local network or Internet, IPv4 is installed.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"

  Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter

  Hi all

  I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)
  A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:
  STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)
  AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801
  I couldn't find anyone with the same problems. Can you help me?
  Thanks in advance,
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• I can only access https / /: Web sites

  can someone help me with this problem, I did things like. Clear the cache, history, uncheck the proxy etc. settings. I restar my Mac in safe mode and I am able to access http / /: and https / /: web sites, this problem happened on my administrator account and not on other accounts, but just happens in all accounts. I don't remember doing something weird on my mac. I see that I am connected to WiFi, but I can't access http / / sites. any help is appreciated and thanks in advance... A better way to reach me is to *.

  < personal information under the direction of the host >

  FYI, personal information (e-mail) are not recommended to post on public forums, it is an invitation for spam.

  For your problem, try disabling IPv6.

  Goto system preferences > network > advanced > TCP/IP > Local link only

• Tecra M5: Can not access the internet pages, but can ping in cmd.exe

  Hi all, this is confusing to me.

  I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:

  -Intel Pro Wireless adapt
  -Drivers audio Sigmatel
  -nVidia graphics card

  Now, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?

  I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.

  I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.

  I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.

  Thank you very much

  MARC

  Hello

  According to your message, you are not able to connect to internet via LAN and WLan. Is this good?

  Well, in your case I would first check the router settings and re still.
  In addition, you must reset the router.

  Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
  Please note that the TCP/IP protocol settings must be set to automatic.

  Check everything first!

• When I click on properties in my tab of connection area I can't access the properties settings.

  Connection impossible access area properties

  When I click on properties in my tab of connection area I can't access the properties settings. I need to change the settings of ip address of my connection to the local network on my laptop

  Hello fazlurslemming,
  1. may I know why you must change the setting of IP address on your laptop?
  2. are you able to connect to the internet?
  3. what version of windows are you using?

  Visit the below link to find the steps to change the IP address on a windows 7 installed system:
  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
  Post back with the State.

• I can't access to our private internet connection... I get the error messages like acquiring network address AND identity validation

  problem network address acquisition
  I can't access to our private internet connection... I get error messages like acquiring network address AND validation of identity no matter how long I wait nothing happens... Please help me.

  create a new internet connection or reset TCP/IP socket

• I have a desktop PC with windows XP (Professional) on this subject, but I can't access to the pc through the remote desktop tool.

  Remote Desktop does not work

  Hello

  I have a desktop PC with windows XP (Professional) on this subject, but I can't access to the pc through the remote desktop tool. I already checked several options, but nothing seems to work. I don't even get an error message, the window just those which blinks and nothing happens...

  Could you please help?

  This is wat I already checked:

  -"allow users to connect remotely...". ' is running

  -TCP/IP listening on port 3389

  -Terminal services are started

  -J' tried connecting to Windows 7 and Windows XP, nothing works

  -Ping the ip address of the client PC works fine

  If you have any other ideas, I would be very gratefull!

  Thanks to advandce

  You will probably need to open port 3389 on your router so that it maps on the computer that is tuned to the connections of the DRC. It seems that you did all the other steps, but your router can prevent the connection to go anywhere. Here's a detailed guide to configure your router for DRC that can provide some guidance.

• No TCP/IPv4 under my network connection properties

  Today, that I had the problem of wake up and find myself unable to connect to the internet, currently limited connectivity and I have not had this problem before, I decided to spend several hours frustrating myself trying to fix it and then I realized that under my properties of the Wi - Fi, I do not have a TCP/IPv4 I tried to reset under cmd but when I do I get an echo of reset request failed, basically does anyone know how I can enter my wireless network properties ipv4?
  Just remember forgot to mention im running vista home premium SP2.

  Run system restore to return to a time before the problem occurred. Boulder computer Maven
  Most Microsoft Valuable Professional

• TCP/IPv4 obtain DNS automatically

  Hi all

  I have my router configured to use dns to opendns servers, and everything works fine except for my desktop under Vista SP3 PC.

  I have my router set up because of the IP based on MAC addresses, so I have the TCP/IPv4 set to obtain an IP and DNS address automatically.

  My problem is the PC of Office Watch reset itself and registering an address in the DNS server box. How do I delete these addresses and force it to Auto adjust.

  I don't really want to put in the openDNS servers, in case I decide to go back to my ISP servers. I prefer to keep auto and make the changes on the router.

  It becomes very frustrating to have to keep resetting.

  Go to start / Control Panel / Internet Options / connections / select the connection and click settings.  Click on properties and go to work in network and select TCP/IPv4.  Under TCP/IPv4, select properties and make sure that the first page says get an address of DNS server automatically.  Click Advanced and then click DNS.  Make sure that the only two boxes checked are Append primary and Suffixes connection specific DNS and add relatives of the main DNS - nothing else suffix suffixes.  Click OK and save this.  This should solve the problem.  But I suspect that you already did (probably several times) so let's move on.

  The only other option that I can think of is to reset the TCP/IP stack that can get rid of the incorrect addresses and run and fresh with the correct settings.  Here is the procedure:http://geekswithblogs.net/mattcampbell/archive/2007/09/30/Resetting-your-whole-IP-stack-in-Vista.aspx.  I don't know if this will help, but if you are having problems with TCP/IP, it is one way that many people use to solve.  Then you will need to reconfigure the TCP/IP settings and then you can see if that does the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Not able to click on internet protocol version 4 (TCP/IPv4) it does not open.

  Original title: about ipv4.

  I could not click on internet protocol version 4 (TCP/IPv4). I want to put the mannul ip but I can't do because of what is not open by clicking. y at - it a solution? Please give me answer fast as you can.

  Try this:

  Go to start-> type cmd-> right-click on->, click run as administrator. Click Yes, if UAC prompts. Then, type the following commands and press ENTER after each command:

  netsh winsock reset

  netsh interface ipv4 reset

  ipconfig/flushdns

  Finally, restart the PC and then check.

• to disable TCP / IPv4 on window 7

  I want to disable tcp /ipv4 on some computer don't not to access Internet

  but you need to connect to the local network.

  Just remove default gateway while maintaining the lan ip address as it is...

  

  The gateway it the thing that confuses wants external to the internet...

• After Anyconnect I can't access to asa and LAN

  Dear all,

  My office use ASA 5505 and I use anyconnect from outside (sometimes overseas), I can connect to my network and business by ASA, internet access, but I can't access ASA and LAN (network of my client). WHY?

  Office 192.168.10.0/24

  192.168.11.0/24 VPN

  How can I solve this problem?

  ASA Version 9.2 (3)
  !
  ciscoasa hostname
  activate the encrypted password of XXXXXXXXXX
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  passwd encrypted XXXXXXXXXX
  names of
  192.168.11.1 mask - 192.168.11.10 local pool Pool VPN IP 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP address 192.168.10.254 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP AAA. BBB. CCC DDD EEE. FFF. GGG. HHH
  !
  boot system Disk0: / asa923 - k8.bin
  passive FTP mode
  clock timezone 8 HKST
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  Name-Server 8.8.8.8
  Server name 8.8.4.4
  permit same-security-traffic intra-interface
  network of the VPN_Pool object
  subnet 192.168.11.0 255.255.255.240
  network of the NETWORK_OBJ_192.168.10.0_24 object
  192.168.10.0 subnet 255.255.255.0
  inside_access_in of access allowed any ip an extended list
  outside_access_in list extended access permit icmp any one
  DefaultRAGroup_splitTunnelAcl_1 list standard access allowed 192.168.10.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm-731 - 101.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  interface NAT (outside, outside) dynamic source VPN_Pool
  NAT (inside, outside) static source any any static destination VPN_Pool VPN_Pool non-proxy-arp-search to itinerary
  !
  !
  NAT source auto after (indoor, outdoor) dynamic one interface
  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 AAA. BBB. CCC DDD. 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Activate Server http XXXXX
  http 192.168.10.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA SHA-ESP-3DES ESP-DES-SHA ESP-AES-128-SHA-TRANS ESP-AES-192-SHA-TRANS ESP-AES-256-SHA-ESP ESP-3DES-SHA-TRANS TRANS-DES-SHA-TRANS
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_TrustPoint0
  Terminal registration
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca trustpoint Anyconnect_Self_Signed_Cert
  registration auto
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  name of the object CN = 115.160.145.114, CN = ciscoasa
  Configure CRL
  trustpool crypto ca policy
  string encryption ca Anyconnect_Self_Signed_Cert certificates
  certificate 5c7d4156
  308202d 4 308201bc a0030201 0202045c 415630 0d06092a 864886f7 0d 010105 7 d
  0500302c 3111300f 06035504 03130863 6973636f 61736131 17301506 092a 8648
  09021608 63697363 6f617361 31353131 31303131 31363231 301e170d 86f70d01
  5a170d32 35313130 37313131 3632315a 302 c 3111 55040313 08636973 300f0603
  636f6173 61311730 1506092a 864886f7 0d 010902 16086369 73636f61 73613082
  0122300d 06092 has 86 01010105 00038201 0f003082 010a 0282 010100cc 4886f70d
  af43a895 8c2c3f49 ad16c4b9 a855b47b 773f4245 1954c 728 7 c 568245 6ddc02ab
  78 c 45473 eb4073f6 401d1dca 050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa
  454ff4bb 691235ab 34e21d98 4cfecef4 204e9c95 76b1b417 b5cf746c 830788b 4
  60063e89 0ffe5381 42694cf8 d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67
  4ad8954f 5392790b 4ded225c c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a
  d054a290 14316cc0 1670bdea f04c828b 7f9483fb 409fa707 fbe5a257 33597fed
  ca790881 b1d4d3dc b0e1095e bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1
  8b9421fa ee2b99ae df07fba1 0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02
  03010001 300 d 0609 2a 864886 05050003 82010100 c8719770 1305bd9c f70d0101
  2608f039 0dc6b058 0dfe3d88 76793 has 18 8f601dda b 8553, 893 d95e3b25 30ef7354
  772f7d0b 772869d 7 372f8f5c f32992af fa2c8b6e 0f0ae4ce 4e068b8d b7916af2
  affa1953 5bfd01a6 1a3c147d 75d95d8c 1122fa85 3905f27b 2474aff4 11fff24f
  c305b648 b4c9d8d4 9dcf444b 9326cda3 0c4635d0 90ff8dd8 9444726c 82e002ec
  be120937 0414c20a 39df72fb 76cd9c38 cde9afda 019e9230 66e5dba8 ed208eae
  5faabb85 ff04f8f2 c36b724b 62ec52cc f967ee1d 1a6458fc 507a 2377 45 c 20635
  2c14c431 baac678a dcc20329 4db7aa51 02c 36904 75b5f307 f1cc056d 726bc436
  597a 3814 4ccd421d cb77d8f5 46a8ae69 2d617ac8 2160d7af
  quit smoking
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate 5d7d4156
  308201f0 30820308 a0030201 0202045d 415630 0d06092a 864886f7 0d 010105 7 d
  05003046 06035504 03130863 61736131 18301606 03550403 6973636f 3111300f
  130f3131 352e3136 302e3134 352e3131 1506092a 34311730 864886f7 0d 010902
  73636f61 16086369 7361301e 170d 0d 323531 3135 31313130 31323136 35395a 17
  3111300f 06035504 03130863 6973636f 61736131 a 31303731 32313635 395, 3046
  18301606 03550403 130f3131 352e3136 302e3134 352e3131 1506092's 34311730
  864886f7 0d 010902 16086369 73636f61 73613082 0122300d 06092 has 86 4886f70d
  01010105 00038201 0f003082 010 has 0282 010100cc af43a895 8c2c3f49 ad16c4b9
  a855b47b 773f4245 1954c 728 7 c 78 45473 eb4073f6 401d1dca 568245 6ddc02ab
  050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa 454ff4bb 691235ab 34e21d98
  b 830788 4 4cfecef4 204e9c95 76b1b417 b5cf746c 60063e89 0ffe5381 42694cf8
  d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67 4ad8954f 5392790b 4ded225c
  c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a d054a290 14316cc0 1670bdea
  f04c828b 7f9483fb 409fa707 fbe5a257 33597fed ca790881 b1d4d3dc b0e1095e
  bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1 8b9421fa ee2b99ae df07fba1
  0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02 03010001 300 d 0609 2a 864886
  05050003 82010100 00089cd 3 d0f65c5e 91f7ee15 bbd98446 35639ef9 f70d0101
  45b 64956 f146234c 472b52e6 f2647ced a109cb6b 52bf5f5d 92471cb7 a3a30b63
  052ac212 c6027535 16e42908 ea37c39a 4d203be9 8c4ed8cd 40935057 3fe8a537
  a837c75c feff4dcc 1b2fd276 257f0b46 8fcd2a5c cbdcacec cd14ee46 be136ae7
  7cd4ae0d aace54fe 5187ea57 40d2af87 cded3085 27d6f5d8 1c15ef98 f95cc90e
  a 485049 4 805efa8f 63406609 a663db53 06b94e53 07c1c808 61eadcdb 2c952bee
  74a0b3dd ae262d84 40b85ec5 a89179b2 7e41648e 93f0e419 3c482b29 e482d344
  d756d450 8f0d9302 d023ac43 a31469a4 105c8a0c b1418907 693c558c 08f499ef
  364bc8ba 4543297a a17735a0
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev2 access remote trustpoint Anyconnect_Self_Signed_Cert
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  No ipv6-vpn-addr-assign aaa
  no local ipv6-vpn-addr-assign

  dhcpd 192.168.10.254 dns 8.8.8.8
  dhcpd rental 43200
  !
  dhcpd address 192.168.10.1 - 192.168.10.100 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP AAA server. BBB. CCC. Source DDD outside prefer
  SSL-point of approval ASDM_Launcher_Access_TrustPoint_0 outside vpnlb-ip
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-4.2.00096-k9.pkg 1
  AnyConnect profiles Anyconnect_client_profile disk0: / Anyconnect_client_profile.xml
  AnyConnect enable
  tunnel-group-list activate
  internal DefaultRAGroup_2 group strategy
  attributes of Group Policy DefaultRAGroup_2
  DNS-server AAA value. BBB. CCC AAA DDD. BBB. CCC DDD.
  Ikev2 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  internal GroupPolicy_Anyconnect group strategy
  attributes of Group Policy GroupPolicy_Anyconnect
  WINS server no
  value of server DNS 8.8.8.8 8.8.4.4
  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
  Split-tunnel-policy tunnelall
  IPv6-split-tunnel-policy excludespecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl_1
  by default no
  activate dns split-tunnel-all
  IPv6 address pools no
  WebVPN
  AnyConnect value Anyconnect_client_profile type user profiles
  username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
  username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
  attributes of username XXXXXXX
  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
  attributes global-tunnel-group DefaultRAGroup
  address pool VPN-pool
  Group Policy - by default-DefaultRAGroup_2
  IPSec-attributes tunnel-group DefaultRAGroup
  IKEv1 pre-shared key XXXXXXXXX
  tunnel-group DefaultRAGroup ppp-attributes
  ms-chap-v2 authentication
  tunnel-group Anyconnect type remote access
  tunnel-group Anyconnect General attributes
  address pool VPN-pool
  Group Policy - by default-GroupPolicy_Anyconnect
  NAT - to-public-ip assigned inside
  tunnel-group Anyconnect webvpn-attributes
  enable Anyconnect group-alias
  tunnel-group Anyconnect ppp-attributes
  ms-chap-v2 authentication
  !
  Global class-card class
  match default-inspection-traffic
  !
  !
  World-Policy policy-map
  Global category
  inspect the dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  service-policy-international policy global
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:24991680b66624113beb31d230c593bb
  : end

  Hi cwhlaw2009,

  You must configure a policy Split-tunnel, if you want to be able to access the internal and local network at the same time.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/100936-asa8x-split-tunnel-AnyConnect-config.html

  It may be useful

  -Randy-

• (RV220W) Help! How can I access with my FileZilla Server?

  Hi everyone - please help a noob of network configuration!  :-)

  I want to share files with people, so I downloaded server software package of FileZilla (free) and now need to get my RV220W router to allow the traffic to this server... and because of my limited understanding of how it all works together, I am currently blocked.

  So if someone could guide me a bit, it would be really great!  I read a few responses from people on port forwarding, but cannot operate in my situation... and probably because I did not understand how the communication happens... like which ports go where and what IP address should be linked to another, etc..

  Here's what I know though:

  FileZilla server - IP 127.0.0.1/port 21 + username + psw

  RV220W router IP 192.168.1.1

  My "external IP" = 37.75.XXX.XXX

  More info needed?

  Now, should what I do, in order to let the other access my server via a klient FTP FileZilla?  :-)

  Oh and I'm using the latest version of firmware RV220W (menu seems reorganized between some versions).

  Input greatly appreciated!  :-)

  You must go to the firewall section (sometimes called security) the router and set up a rule to access the IP address of ANY side ALLOW WAN to the local IP address of the FTP server. Then go to transfer port (sometimes called Apps and games on some routers) and set up a single port forward port 21 to the local IP address of the FTP server. The 127.0.0.1 address you stated is the Local host, which is not the IP of your server network. Go to the command line and run ' ipconfig / has "without the quotes. Find your ethernet interface, and it will tell you the IP address assigned. You might have to configure this server with a static IP address either by making a reservation in DHCP from the router, or to go in your server network connection properties and there to under TCP/IPv4 properties. This way your server will not change IP addresses when the DHCP lease runs out.

  I hope this helps...

  You seasoned here guys kill... You should be ready to help people, regardless of their level of experience. There was a time where you guys didn't know squat either...