I can't access the 0x8004230F system restore error code

Similar Questions

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• Can not access the updates XP, 0x8024400A error message.

  I reformatted my HARD drive, reloaded XP SP2 Home. Download IE 8. I need XP SP 3, but now I can not access the updates... 0x8024400A error message.

  Help please

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  This should move your 0x8024400A problem. So try and get up-to-date with the Windows updates. You will probably have to go through Genuine Windows Validation.

  Tricky

• 5.4 Lightroom can't access the page import: "internal error - could not find namespace: AgCreativeCloudUtils".

  I just installed Lightroom 5.4 (I use OS 10.10.2), and now I can't access the import page.

  The error message says: internal error - namespace was not found: AgCreativeCloudUtils

  Does anyone know how to fix this?

  Thank you.

  I thought about it. I used 5.4 but installed 5.7.1 so a simple reboot fixed it.

• Can't preform the XP system restore. System Restore is turned on but never successful when he preforming.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: my system restore worked correctly for a while now.  I have not installed new software or hardware.  My HP printer has ceased to be able to Scan at the same time that the system restore stopped working.  As far as I know it was when I got a big update from Microsoft.  Appreciated all help thanks

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You can try to reinstall the system restore by clicking Start-> Run-> then copy and paste this command into the text box:

  Rundll32.exe advpack.dll, LaunchINFSection, %Windir%\Inf\sr.inf

  and then click OK. You may need your Windows XP CD handy. Insert it when / if necessary.

  Here are other steps that you can try when System Restore does not work

  http://support.Microsoft.com/kb/302796

• How can I cancel the recent system restore I did?

  Nice day.
  I have a point of restoration, dated July 3, 2013, July 4, 2013.
  When I opened the system restore this morning he showed a restore point dated July 8, 2013. I restored my computer to date.
  After the restoration, when I open again the system restore on July 3 and July 4 point catering was gone and I want to cancel the system restore I did recently but I can't find the undo function.
  How can I cancel the recent restoration of the system that I did.

  Original title: System Restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  Restore points are saved until the system restore reserves HDD space is filled. As new restore points are created, old ones are deleted. If you disable the Protection System (the feature that creates restore points) on a disk, all restore points are deleted from this drive. When you turn System Protection, new restore points are created.

  What To Do About missing Windows 7 restore points
  http://itexpertvoice.com/home/what-to-do-about-missing-Windows-7-restore-points/

  J W Stuart: http://www.pagestart.com

• Cannot use System Restore - error code 0x80070005

  I can't restore my computer to an earlier date as it comes back with the error code 0 x 80070005 suggesting that I disable the virus protection that I've done and tried again, same message appeared, I uninstalled the antivirus completely and always got the same message, I downloaded then the scanner from Microsoft which showed no problems with all the files even with a total sweep someone out there can offer advice please

  Moved from feedback

  Original title: error code 0x80070005

  Hello

  Thank you very much for your response, I am using windows 7.

  I managed to solve the problem by choosing a much earlier restore point, which suggests the problem was caused by a Microsoft Update.

  Kind regards

• Cannot access the name \\computer 0 error code x 80070035 using 2 machines Win 7 Professional x 64

  Makes me crazy!

  State of the computer 1: Norton 360 on. Wired Ethernet for Linksys router. This Computer Configuration initially homegroup. User name and password on both machines. 2 computer can see this machine as expected - sweet!

  State of the computer 2: uninstalled Norton 360. Windows Firewall is off. Wired Ethernet for Linksys router. User name and password on both machines. This computer cannot be seen by computer 1 grrrrr!

  I left home group on both machines several times without success. Several reboots. Convenience stores are worthless. I tried a lot of things posted on this forum and others. My Win 7 machines see my XP machines without problem. All computers in the same workgroup. I can ping computer 2 1 computer and vice versa.

  Earlier this week, it's the opposite problem. 2 computer could not see Computer1. Even old 'advanced sharing' has failed. After 3 days of forums and try things, I reinstalled Win 7 on both computers and everything was fine. Very painful and I am reluctant to reinstall all my software until this problem is fixed permanently.

  Does anyone have a short solution to reinstall Win 7?

  Any ideas why it continues to be? I set up a wireless network first network printer, and then wired, then to the USB. I uninstalled all the software of printer, but that did not help.

  Hi Jack_W,

  Since you are able to see and access computer 2 1 computer and unable to see the computer from computer 1 2. I suggest you first with the computer to check if network discovery is enabled on the computer.

  To turn on network discovery

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2. click on the chevron to expand the current network profile.

  3. If network discovery is off, under the Discovery Network, click turn on network discovery, and then click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, you can access the link and follow the steps and check if it helps to see the computer 2.
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  You can also check if you can access computer computer 2 1 by opening with the command run and typing in the IP address of computer 2.

  To do this, follow the steps in the computer 1.

  1. Click Start
  2. In the start menu search box type computer 2 \\ipaddress\ and press on enter for example: \\192.168.0.2\

  Check if it opens and connects to the computer 2 in the network.

  Also, you can try to start the computer in safe mode with network and see if they can see each other.  To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix the Windows Update Ox80072EE2 error code?

  original title: How can I fix error code Ox80072EE2?

  Get the Ox80072EE2 error. Chose the express download then Windows Update checked for the latest updates, but the update did not follow and gave the error code Ox80072EE2. Tried several times. I have Windows XP Service Pack 3. Downloaded FixIt, but did not fix. Last successful update was 12/14/11. How can I fix this error code? Thanks a bunch for all help!

  If Windows Update error 80072ee2 during updates, you may need to add the addresses of websites which Windows Update downloads updates to the exceptions to your firewall or 'green list '.

  To add the Windows Update Web sites to a firewall exceptions list

  • Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, see Help for the software publisher to see how to add these websites to your firewall exceptions list:

    • >

  If the problem persists after these steps, see this

  http://support.Microsoft.com/?kbid=836941>

  UTC/GMT is 03:26 on Tuesday, January 10, 2012

• Can not install the printer driver. Error code 0 x 0000490.

  I have Windows Vista and I have a printer HP 3512. For some reason, I can not install the printer and I keep getting an error 0 x 0000490. Help, please?

  Moved from Vista to install, upgrade and activate Forum.

  Hi Courtney,

  Please contact the Microsoft Community.

  I'd like you first try printing HP and doctor Scan.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  After that, I would have you to refer to this article-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5241114

  We know if that helps your cause.

• Ststem restore error code 0 x 490 and the verification of the integrity of file Sys...

  don't really know where to post:

  Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
  System Restore error code 0 x 490 and Sys files integrity check...

  .. .and now after trying to make the (that failed) repair and restoration * who failed 3 times) and the "clean boot" of http://support.microsoft.com/kb/929135 here my laptop charge a temporary office that does not record my personal settings. I uninstalled programs I thought that maybe the problem, but it always loads the Temp. desktop computer. I have no one.
  drive recovery for this Toshiba laptop but I do it to my another Tower, which is a Toshiba as well. I really want to do a restore if I can help it. I have too in my bookmarks/favorites to lose. I just want to know what the problem is and fix it.
  Any help would be appreciated. I don't really have the money to take it to a computer store.

  Concerning
  BT

  Hello

  See if this helps you:

  "Error of the user - logged on with a temporary profile profile".

  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  "A temporary profile is loaded after you connect to a Windows Vista-based system.

  http://support.Microsoft.com/kb/947242

  If you do not have to make a recovery here is the use of the Toshiba Recovery Partition.

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2737864&PF=true

  See you soon.

• Load firefox 3.6.14 and now can't access the internet. Computer restored to the previous version works now. 3.6.14 I tried again and the same problem, any ideas?

  Using windows 7. As soon as the update of firefox, I can not access Internet. I tried Internet Explorer works well. I have restored the previous computer Firefox and it works fine. Tried the update again and the same problem can not access the internet.

  This is usually caused by a firewall blocking the new version of Firefox. For more information, see https://support.mozilla.com/kb/Cannot+connect+after+upgrading+Firefox

• How can I identify the date when the last system restore was used to roll back the pc?

  Original title: how System Restore last used

  As the title suggests, how can I identify the date when the last system restore was used to roll back the pc?

  I can remove all restore points. I've used twice now the beta off Defender & he assures me
  the pc is clean Virgin.

  I have just got rid of a Trojan dropper & a Win 32/AmmyyAdmin. -(whatever it was!)

  I now seem to have acquired Windows Powershell along the way, gawd knows where!

  He was not here a few days ago and I don't have any idea where it is!

  What is it and should I be worried?

  Thank you

  Hello

  You can check this link:

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Tecra M5: Can not access the internet pages, but can ping in cmd.exe

  Hi all, this is confusing to me.

  I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:

  -Intel Pro Wireless adapt
  -Drivers audio Sigmatel
  -nVidia graphics card

  Now, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?

  I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.

  I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.

  I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.

  Thank you very much

  MARC

  Hello

  According to your message, you are not able to connect to internet via LAN and WLan. Is this good?

  Well, in your case I would first check the router settings and re still.
  In addition, you must reset the router.

  Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
  Please note that the TCP/IP protocol settings must be set to automatic.

  Check everything first!