I can't connect my laptop to my wireless router.

Similar Questions

• How can I connect my laptop to the wireless internet?

  Ive recently bought a new laptop and im eager to connect to wireless internet but I can't remember the password for my name wireless as my old laptop just used to connect to it and the password has been saved there. So the name appears just and I can't connect to it im wondering if I need to create a new name wireless and if so do I need to remove the one to do this and how?

  Follow these instructions...

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=18RAS7QwckB

• Windows vista basic when I turn it on is to try to do a startup repair but can't, I can not connect my laptop

  ORIGINAL TITLE: Need help with this 1, you can

  I have a dell inspiron 1520 windows vista basic when I turn it on it is

  trying to do a startup repair but can't so I can't connect my laptop or anything

  with it so please can someone help me

  Hello

  Try to press F12 on startup and run the Dell, diagnostic tests.

  "How to run Dell 32-bit Diagnostics utility"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  And here is the link to the Dell Forums; they may not know this error code:

  http://en.community.Dell.com/support-forums/default.aspx

  And here are the methods, if necessary, to reinstall Vista on a Dell computer.

  Since the recovery Partition;

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And if provided by Dell discs recovery.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  See you soon.

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• can I use this machine as a wireless router? HP pavilion p6644y desktop PC.

  can I use this machine as a wireless router? HP pavilion p6644y desktop PC.  IE, throw my old linksys.  plug my comcast moden directly into the machine, then use the tower itself as the router for the laptop and the playstation 3 in the House.

  Hello

  The PC can not be called as a 'router', but you can use Windows Internet Connection Sharing (ICS) to do this, BUT sometimes may not be good as good and simple as the use of a wireless router.

  Kind regards.

• 4600 pro connects to the Linksys WAG354 Wireless router!

  Hello

  I have a Toshiba Satellite Pro 4600 with internal wireless card. I'm trying to connect to my Linksys WAG354 wireless router. The laptop seems to connect but only get a connection status ' Limited or no connectivity "note computer says it has problem because the network has not assigned a network address of the computer.

  I called Linksys, but the call center do not have a lot of help! They said that I should update the driver for the Toshiba wireless... I did that, but still the same problem.

  I am running windows XP. I have two other laptops connected to the router WAG354 and they work fine.

  Any advice would be much appreciated.

  Hello

  I agree with Michael. I think that some false setting is responsible for this. If your network is visible for the laptop, the features of the card are OK and the problem parameters.

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• How can I block others access to my wireless router?

  I have performance slow and even lose connections.  I have Comcast and they have suggested that it is 'noisy' of what they see on their end.  The technology said that he receives many complaints from users of wireless router.

  Hello

  Quote: "How can I block others access to my wireless router?

  By setting up the wireless router security encryption.

  Of the weaker for wireless security, more strong capacity is.

  No security
  Switch Off SSID (even has No Security. SSID can be sniffed easily even if it is turned off)
  MAC Filtering___ (Band Aid if nothing else is available, MAC number can be easily Spoofed).
  WEP64___ (Easy, "Break" by knowledgeable people).
  WEP128___ (a little more difficult to activate, but "Piraté" too).

  -------------------
  The three above are not considered safe.
  Safe starts here at WPA.
  -------------------

  WPA-PSK__(Very Hard to Break).

  WPA-AES__(Not functionally Breakable)

  WPA2___ (not functionally breakable).

  Note 1: WPA - AES the current interpretation level entry of WPA2.

  Note 2: If you use WinXP SP3 bellows and not updated, you need to download
  the WPA2 Microsoft's fix.

  Documentation of your devices (router wireless and computer wireless card) must indicate the type of security that is available with your wireless hardware.

  All devices MUST be set to the same level of security using the same password.
  Therefore, security must be set according to what is the best possible one of the wireless devices.

  I.e. even if most of your system may be able to be configured to the maximum with WPA2, but a device is able to be configured for maximum of the WEP Protocol, to the whole system must be configured to WEP.

  If you need more security and a device (such as a wireless card that can only do WEP) is now better security for the entire network, replace with a better device.

• Equium A100-147: can I connect my laptop to my desktop hard drive?

  My computer laptop satellite has a permanent error when I turn it on: "autochk program not found - skipping autocheck.

  I've tried everything I can think (and advice of you internet) to get the data on my laptop hard drive, including the creation of a boot disk (using an external floppy drive) and a knoppix disk and nothing worked.

  Now, I suppose that if I can connect the hard drive laptop on my desk, I can get the data in this way? But how can I do?

  I bought an IDE 3.5 "to 2.5" adapter disk hard drive, but the instructions indicate that laptop hard drive must have a male connector 44? The hard drive is a Toshiba MK6034GSX and when I removed it I couldn't see 44 pine?

  Any help would be greatly appreciated.

  Thank you

  Yes you can do it, but you need USB 2.0 2.5 hard drive enclosure Kit ".
  Make sure that you buy a box with the right interface. Your HARD drive is SATA HDD.

  If you can connect the laptop HDD s to every desktop or laptop as external HARD drive and you will have access to all stored data.

• Xperia Z5 can't connect to laptop

  My Xperia Z5 can't connect to my laptop, for more details on my laptop, its window 7 64-bit. I have already used in PC

  Companion to help recognize the phone and I got this

  

  This who should supposed to do, I have tried many solutions and I still can't understand.

  I appreciate your help.

  I thought about it, I just install new windows and it works perfectly well with all of the xperia z5 function can provide for me, browsing using Explorer, by using Windows media player etc. I think the problem is that windows is too old for the new function z5 provide to us.

• can only connect to internet access using wireless or ethernet cable

  I use a computer Windows Vista with Internet Explorer 8.

  When I try to connect to the internet from my laptop on a Netgear router I can connect only with limited access via an ethernet cable or wireless. My computer detects and attempts to connect (with complete connection) to the netgear router, but then the prompt appears on the screen, "connection takes longer than usual." Then, it displays "connection failure.

  I tried to use all the recommended solutions such as move the computer to a different location, automatically get new ip settings, etc... without success.

  In the past, I could access the internet without problems and the full connection and wonder if my college internet connection may have screwed up the settings.

  Thank you

  Hi Travis98,

  You can try to boot into safe mode with network and check if the problem occurs.

  Step 1: to start in Mode safe mode with network you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the Advanced Boot Options screen, use the arrow keys to select the safe mode with networking option and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  For more information, you can consult the following link to start the mode safe mode with networking:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Please post back and let us know the results.

  Hope the helps of information.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I connect to the Deskjet 3050 wireless and LAN?

  I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

  Hello

  The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

  The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

  Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

  If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

  Shlomi

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• Cannot connect to the nintendo wii wireless router

  Original title: WiFi

  IM problems to connect my nintendo wii to my wireless router, my laptop seems to connect very well, but I can't connect to the wii, for some reason I can't find the router or connection Wireless on my pc to try and solve the problems there. im not all that computer savvy so any help will be greatly appreciated thanks.

  Hello
  You try to connect the nintendo Wii to router or laptop?
  
  Try this:

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '.

  3. click 'Connection settings', and then select a connection that marked 'None '.

  4. Select "Wireless connection" and "Access Point search."

  5. choose what access point to connect to, then click on 'OK '.

  Manual installation

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '. Click on "Connection settings" and choose an open connection that marked 'None '.

  3. choose "Wireless connection" and "Manual Configuration".

  4. Enter the SSID of your router. Click on the blue arrow to the right of the box to move to the next screen.

  5. Enter the security information. If you don't use WEP or WPA security, go directly to the next screen.

  6 choose whether or not to auto-obtenir address IP and DNS information. If you choose auto-obtenir, go to "Advanced settings" and enter your information of intellectual property.

  7. the MTU value. Most users leave this field empty, but it can be set to 1500 if you have connection problems.

  8. choose 'Save' and 'OK '. Select 'OK' to test the connection.

  If this does not work, contact nintendo for best support.

  Online connection support

  http://www.Nintendo.com/consumer/systems/Wii/en_na/online.jsp

  Troubleshooting wireless router

  http://www.Nintendo.com/consumer/systems/Wii/en_na/onlineWirelessRouterTroubleshooting.jsp

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Connect Windows Vista to the wireless router

  installed the wireless router. How to connect my computer laptop tosiba windows vista to use without being plugged >

  Click Start, connect to, select your wireless router, click on the 'Connect' button below.

  I hope I could help