I can't connect to wifi wireless I want more often recreatives__

Similar Questions

• After a clean install of Windows 7, I can't connect to the wireless network and more problems...

  I recently did a clean install of genuine copy of Windows 7 Home Premium to clear unwanted programs all on my computer. Because the product key are disabled unexpectedly.

  The installation works fine, but after the installation. I can't connect to a wireless network, because there is no network adapter installed on the computer.

  Also, I can't set my screen resolution of 1366 x 768. Before any new install, the screen resolution sets to 1366 x 768 as native and recommended screen resolution. Now, I'm stuck at the screen resolution 1024 x 768. I need to change the graphics card so my laptop screen can support 1366 x 768? If necessary, please give me instructions on how to do this.

  Thank you.

  Acer Aspire one C5Cbb-722

  Go here, select your model, then download and install the network and video drivers.

  http://www.Acer.ca/AC/en/CA/content/drivers

• I can´t connect via WIFI.

  I can´t connect via WIFI. My equipment is a Realtek RTL8191SE WLAN 802.11n, is recognized by the computer as work, and the version of the driver is the last update, I found on the web (version 2015.1.427.2010, dated 2010.04.27. What should I do?

  Hi Jeremiah c,.

  ·         What happens when trying to connect via wifi?

  ·         You receive an error message/code?

  ·         Have you made changes on the computer before this problem?

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 3: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4: Follow the steps in the articles provided.

  In the Windows wireless network connection problems

  Wireless network card: frequently asked questions

  Also update the latest drivers for the network card.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• Error - Server cannot be found. Can't connect to WIFI in Windows XP machine.

  Original title: I can't connect to wifi using my laptop. I can log on when perfectly well using the ethernet adapter and my cable modem.

  I can't connect on wifi with my laptop. "Wireless network connection" reads "connected." Power supply: 'excellent '. When I try to connect to internet, I get the message "Cannot find server" as if there is a problem with my IP address. I can connect to the internet perfectly well when you use the with my cable modem ethernet adapter. Any ideas?

  Hi cmptrken,

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.

  Please post back and we do know.

• I can't connect to my wireless network.

  I can't connect to my wireless network.
  I pressed the FN + F8 combination keys and a box will appear briefly on the screen then disaappears quickly.
  I don't have time to click on anything, and also a message said that I have no network connection.

  I disabled my firewall on a case where this caused a problem.
  Can someone please

  Hello

  > I pressed the FN + F8 combination keys and a box appears briefly on the screen, then disappears quickly

  This is nothing unusual. You need to pass only to the WLan and then disappear the wishes of the box! There is nothing wrong.

  First, you must activate the WLan switch on the side of cell phones! Then use the FN + F8 key to switch to the WLan.
  Then use the configuration Windows own option or a 3rd party WLan client configuration tool like Atheros or Intel ProSet utility. But it depends on the WLan card manufacture what utility can be used!

  Then set the right settings such as the SSID, password encryption, etc.
  If you have set all right should then work!

• I had to reinstall my windows OS and now I can't connect to a wireless device, tells me that it cannot detect any wireless network hardware

  original title: Wireless help network device

  Help, please. I had to reinstall my windows OS and now I can't connect to my wireless device. When I try it tells me that it cannot detect any wireless network hardware. I am currently connected via my laptop air card. Please help me to find and correct the problem.

  Have you installed all of the correct drivers?

• I can't connect to any wireless internet access

  My system is windows 7, before the internet was fine, I can go anywhere, but now I can't connect to any wireless network. I open the Panel of the network adapter, and I see only the local and other network connections, I downloaded (I downloaded them a long time ago, it has not affected my internet). Then I go to my friends computer and research and on any site that told me to look at the Device Manager. so I checked and under the map ISATAP and Teredo, there was a yellow exclamation point, and in the properties, it says "this device cannot start code 10." This has been a very serious problem, I can just keep borrowing my friend's pc, I really need help!

  Deng Hello,

  Thank you for the update on the issue.

  1. How did you try to start the computer in safe mode?

  Try to start in safe mode and check if the computer boots to the desktop

  See the article: start your computer in safe mode

  http://Windows.Microsoft.com/en-AU/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer starts in safe mode desktop, check in a clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Let us know the result, we will be happy to help you further.

  Thank you.

• BlackBerry smartphones, I can't connect to wifi

  I can't connect to wifi

  I m still free wifi struggling its got an arrow can help u connect

• I can not connect on my site to school more since I've updated my firefox to 34.0.5.

  I can not connect on my site to school more since I've updated my firefox to 34.0.5. I deleted the cert8.db and still have the same problem. Help, please!
  Here is the error: unable to connect safely
  Firefox cannot guarantee the security of your data on my.saintleo.edu , because it uses SSLv3, a broken security protocol.
  Advanced information: ssl_error_no_cypher_overlap

  One possibility is to use this extension to activate SSL3 temporarily only for a Web site that needs SSL3.

  • Control of SSL Version: https://addons.mozilla.org/firefox/addon/ssl-version-control/

• Hi, can I connect the machine to the time more than a mac?

  Hi, can I connect the machine to the time more than a mac?

  Yes. Each time backwards Machine until will settle on the Time Capsule in a separate file.

• Can I connect to wifi using an older version of XP pro?

  Hi, I tried to connect to a wifi system library with my Windows XP pro system. The OS is the drive immediately and has not been updated. It does not seem an option in "Network connections" for the wireless, but it has broadband services. I tried to connect with it, but without success. I don't see any of the available wifi signals shown. I have to upgrade to a later version of XP to see the 'Wireless Network Connection' option? The problem is, I have no way to upgrade, unless I can do it by downloading the file to update with my other computer that connects. Is it possible to connect with the XP version I have? Thank you very much!

  The basic problem is that when Windows is freshly installed ("just behind the disc") missing drivers for a large number of materials, including in the case of laptops, which often use custom hardware.

  You need to go to http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs and enter the Service of Dell (which is supposed to access you a page of download from Dell that uses drivers for your particular hardware configuration, rather than all the drivers for your Dell generic type).

  Dell recommends that the drivers are installed in a particular order: http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=bsd&docid=DSN_1A0C0937D62A8739E0401E0A55174744

  The Broadcom driver that you have installed is to the network (wired) Ethernet controller.  You must also install the driver for the wireless card.  Dell has installed several different models of wireless cards in the Latitude D620.  If using the Service tag, it does not narrow down, see if you can identify the make and model by looking at the entries in the Device Manager for the "Network controller" or "unknown device".

  You can also see if the system information tool (start > run > msinfo32.exe > OK) provides information of brand and model of the wireless card.  Go to components > network (not, as you might assume, under "Resources").

• I can't connect to wifi?

  Hello

  For awhile now, my laptop does not connect to WiFi, it will not show again all WiFi connections. I have read questions posted by others on this site and I've tried steps as the removal of all WiFi connections made in the pass, troubleshooting and following the steps, etc. Troubleshooting continues to advise me to activate the wireless feature and I do, but it doesn't seem to register? He always tells me that it is off, even if it's on. I have had absolutely no problem before, I don't know if I clicked accidentally something settings, but has happened for some time now and I really want to solve this problem because I use a cable Ethernet instead of WiFi which is very inconvenient.

  Hello

  Check with the system manufacturer, their documentation support online and drivers,
  and ask questions in the forums about known problems. Some laptops have access to keys
  turn the WiFi on and off.

  Actually try updating your driver and disabling the network logon:

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually
  using the methods below is preferable to ensure that the latest system drivers
  Creator and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - left side, click on manage
  Remove the wireless network - right-click of networks - networks-
  RESET. Start - Connect To - to log on to the network.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I recover my wifi/wireless Intel ProSET software after I uninstalled the upgrade to Windows 7?

  I am trying to install Windows 7 as an upgrade to Windows Vista, and it tells me that I need to uninstall my wifi/wireless Intel ProSET software (I have a Toshiba laptop, A350).  I hesitated to do it, but finally I uninstalled the software and of course now do not have internet.  I know that I can connect my modem for internet needed tough (via USB), but first I have some questions about the wireless...

  (1) because I lost my connection Uninstall wireless, I tried to get it back and didn't know how else do a restore of Windows.  I tried to restore to a restore point before I uninstalled the software, and then restart it says that Windows cannot restore because of an unspecified error.  What could be this error?  I tried several restore points and I get the same error.

  (2) how can I get the software reinstalled if I want to stay with Vista for now wireless?  Do I need to download it from the Intel site?  I can't find the software Intel ProSET wireless wifi on my computer.

  (3) if/when I install Windows 7 correctly, it'll reinstall my driver wireless automatically or do I have to manually reinstall software ProSET Intell wifi from the Intel site?

  Thanks in advance for the help!

  See http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK or the local Toshiba site. The software you need is available for download.

• How can I connect using wifi?

  I can't connect to an extract using wifi.

  The first thing to check is to see if the preview work if you connect your iPhone/iPad to your computer via a USB cable.  If USB does not work, but you still want to use wifi, then here are some things to check.

  For wifi, here are a few suggestions:

  1. Make sure that you have installed Photoshop CC 2015 updates, as have been some improvements in wifi connection.
  2. Make sure that you have signed in the creative cloud by using the same user account in the creative cloud desktop application and the iOS Preview app. To verify which user account is used on your computer, launch Photoshop CC 2015 > open the menu help > and confirm that you see your Adobe ID listed next to "logout".
  3. So that your device to appear in the device Preview Panel in Photoshop, the iOS app preview must be open and you must be logged in. Believe you that your device is listed in the overview of the unit Panel? You see the preview with instructions telling icon to launch the application and connect via USB or wifi?
  4. Make sure that your computer and your iOS device are on the same wi - fi network.  The overview of the unit Panel now displays a warning icon and a link to troubleshooting if there is a problem connecting via wifi to the computer running Photoshop for the device that is running the iOS Preview CC app.
  5. WiFi connections can now be initiated using the button "Check for Devices ' in the overview of the device Panel. If you have already connected devices, you will see a refresh button in the Panel that allows you to check for new wifi devices. Preview will automatically check for new wifi devices when you do one of the following: first launch Photoshop (if the Panel is open); Open the control panel; Open a document; or documents. Devices connected via USB are not affected by this change and will be always automatically connect.
  6. Make sure that your computer and your iOS device are on the same wireless subnet.
  7. If you use VPN on your computer or iOS device, try to disconnect from the VPN and then try to connect in the preview.
  8. If you have a firewall running, try to disable it temporarily and see if it is related to the problem.
  9. If you still have difficulty getting a wifi connection works, please send an email to [email protected] and tell us where you have wifi problems. At home? At work? Please let us also know what wifi equipment you use.

• Can not connect via WiFi

  Hello!

  I recently got a laptop and I can't connect to my laptop wwhen network frist launches the application finds net work >
  but then the now net go strives to find. This is due to?
  1 / wifi is on.

  2 / all of the settings are correct as a tell?

  can someone help

  Hello!

  Recognition of new networks or peut t you find any networks?
  Please describe your problem excatlier.

  But for most of the problems of WiFi: do a pilot and a BIOS update.
  Turn off firewall
  Disable all the security features of the router
  Make sure that the laptop and the router use the same WLAN standard.

  Good bye