I can't copy my backup files saved in Firefox. I have in the folder.

Similar Questions

• How can I copy an .exe file of the winow downloads on my hard drive?

  the header is the question

  "How can I copy an .exe file of the winow downloads on my hard drive?

  If the file is always displayed in the Download Manager window, then you can use open folder on the shortcut menu. If this entry is grayed out then the file is no longer at this location to download. Possible causes are cleaning software or anti-virus that deleted the file.

• How can I restore my backup files on an external hard drive using Windows XP SP3?

  I back up my files to an external hard drive using windows XP sp2. My pc crashed and re installed with Windows XP sp3. Now I can't find the backup on the system tools utility. How can I restore my backup files. Help, please.

  Hi PML.

  Yes, I used the built in «Back to the top of the tool» Unfortunately I don't have the CD. My Netbook is a HP mini computer that comes with Windows XP home. Thank you for your help and I hope to hear from you again.

  How do you reinstall Windows?  If you have used the HP Recovery system to recover from a hidden partition, backup should have been reinstalled.

  I suggest you call HP support.

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• I can longer open attached pdf files. I am able to preview the files, but they are too small for me to read.

  * Original title: attachments

  Help, please.

  I did something wrong (AGAIN!)

  I had no problem with access to attachments to my e-mails, but a problem occurred just.

  I can longer open attached pdf files.  I am able to preview the files, but they are too small for me to read.  When I click to open all the I get now is a kind of icon (in Microsoft Office Picture Manager) with which I can't do anything.

  It seems I should have arranged for Picture Manager automatically opens attachments to emails, but when this happens, I'm stuck as what I try, I can't do pdf files appear as they did.

  The help file does not really help.

  I hope it is something simple, even an old fool like me can do with your expert (and, I hope. friendly) help.

  My fingers are crossed.

  My apologies if I offended Protocol - this is my first venture.regards

  Octogenarian John

  PS My usual guru (aka grandson James) has acquired his first girlfriend, is not so disinclined to waste time me tutoring on the PC

  Create a file association.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: (Whatever you have installed a PDF reader).
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  This should allow you to open these attachments directly from email address now.

• How can I import an excel file into an already existing form on the PDF (via AdobePro)?

  How can I import an excel file into an already existing form on the PDF (via AdobePro)? No data just directly, drop-down lists.

  Hi spencert3881156,

  Please post on the Adobe forums.

  You can visit the following link on the same thread:

  Can I import data from an Excel worksheet to a PDF form? (Create PDF)

  Let me know if this helps.

  Kind regards

  Ana Maria

• How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

  I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

  If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!

• My network PC sign together on "Authorized" in Acrobat Reader 11 and I can digitally sign documents. Several others on my team have signing the value "Unauthorized" and are unable to sign digitally the same documents. My IT Department. have informed them

  My network PC sign together on "Authorized" in Acrobat Reader 11 and I can digitally sign documents. Several others on my team have signing the value "Unauthorized" and are unable to sign digitally the same documents. My IT Department. informed that they are unable to manually change the value on the other PC that seems strange or false to me, but could be due to several factors associated with the network? Advice, I can provide my team who will help you solve this problem?

  Reader 11.0.07 was the first version of the player that was able to digitally sign files that are not compatible with the use of the signature digital good reader.

• How can I read my backup files from iPhone 4?

  How to open my saved files to the iPhone 4 that I recorded via iTunes without recover all the data on my device? I need to read the notes and I need a way to read without getting the backup all on my device, is it possible to open iTunes backup files? Thank you it is very important

  Make a backup of your iPhone a current.

  Restore the backup you are interested in.

  When you are finished, you can restore from the current backup again in the first step

• Power options can be copied to a file?

  There are many Options of food, especially under Advanced settings (brightness, require a password on wake up, etc.).  It would be very useful to be able to copy these options and the current settings for management of power supply in a text file or a Word document, or something like that.  It would be much easier to see them like that than to have to scroll through a lot of them and having to click on it a lot to see what the options are.  It would also be a good way of documenting the current settings in case they are lost or if they need to be put into a new computer or something.

  Yes, this can be done.  You can run it from the high command prompt or put everything in a single batch file that is run as an administrator.  This is the batch file that I use [I have added explanations for each bit in brackets]

  powercfg/l > D:\SystemSettings\PowerPlans\PowerPlansList.txt

  [the above line creates a list like this:-]

  [Existing power management (* Active)]
  -----------------------------------
  [Power Scheme GUID: 381b4222-f694-41f0-9685-ff5bb260df2e (balanced) *]
  [Power Scheme GUID: 53e6f3f1-c9fb-431c-8099-293a3c1a3938 (reading)]
  [Power Scheme GUID: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c (high performance)]
  [[Power Scheme GUID: a1841308-3541-4fab-bc81-f71556f20b4a (Power saver)]]

  [The next four lines exporting power management so they can be imported, using a similar command, if I wanted to restore them - so these lines belong to the backup of the batch file.]  The central part of each line sets the destination to the folder I want to keep it in and then the last part of each line gives the identification code GUID for each power plan indicated in the copied above results.]

  powercfg-export 381b4222-f694-41f0-9685-ff5bb260df2e 'D:\SystemSettings\PowerPlans\Balanced.pow '.
  powercfg-export 'D:\SystemSettings\PowerPlans\Reading.pow' 53e6f3f1-c9fb-431c-8099-293a3c1a3938
  powercfg-export 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c 'D:\SystemSettings\PowerPlans\HighPerformance.pow '.
  powercfg-export a1841308-3541-4fab-bc81-f71556f20b4a 'D:\SystemSettings\PowerPlans\PowerSaver.pow '.

  [The following four lines create text files of all of the properties, including hidden properties, each power plan in the same folder that I have used before.  [If I never look through the files I copy all of the text, then paste it in Excel, because it is much easier to move the results in this way.]

  powercfg - qh 381b4222-f694-41f0-9685-ff5bb260df2e > "D:\SystemSettings\PowerPlans\Balanced.txt."
  powercfg - qh 53e6f3f1-c9fb-431c-8099-293a3c1a3938 > 'D:\SystemSettings\PowerPlans\Reading.txt '.
  powercfg - qh 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c > "D:\SystemSettings\PowerPlans\HighPerformance.txt."
  powercfg - qh a1841308-3541-4fab-bc81-f71556f20b4a > "D:\SystemSettings\PowerPlans\PowerSaver.txt."

  [If you look at each of the properties in these results, that you can feel overwhelmed at first. In each property, there may be enough information to understand what it is. Alternatively, you can look back in the interface of normal eating plan to help understand some of the better properties.   You can also refer to PMPolicy_Windows.docx, see power policy Configuration and deployment in Windows and any information provided by the manufacturer of the device of design. (Windows) power management [ contains further background information.]

• What happened to vista can not copy and replace files can only merge with my outside

  Hello. I look online. I see on my last update of windows, 4-2015, when I copy my documents or I just copy a folder that was my backup external drive upgrade that copy and replace it is now gone and he only asks you if you want to merge the files. I don't want to merge my files and not happy about it. What is my old folder and what is my new. It seems that Microsoft is now trying to do more work for the user. The process used to be simple. I use my old vista computer and waiting for my new computer which has Windows 7pro.

  You had a good thing going with the copy and replace he composed easy support. Now I have a folder in a folder that is so my old and who has been my update to easily remove the old. I don't know why you guys did this. No I don't have to go into my backup and delete the folder in there, it would be too long. So, how do we change that back to use, copy and replace the product, do this for all conflicts etc.?

  Thank you for your help

  Hi, Yes, I know this is how it should work, but was funny. It's a problem with my old computer I think. I am trying the implementation of a new system and when I downloaded 'documents' on my new machine everything behaved normally and he did the right folder thing.  So it doesn't seem to be a problem with my old vista machine that goes down! In addition, I scan my external HD before download of the new machine.

  Thank you

• Change the location of backup files saved in CS6?

  Hey all,.

  I use Photoshop CS6 and she put auto save every 10 minutes. I would like to have backup automatically but it keep save them to the desktop and then all this is a mass

  (same question because of Corel Painter) Is there a way to set a folder and make Photoshop Save there?

  Thank you.

  You specify what or readers to use as working disks in the preferences.

  In my case, this is drive G. It is time which files go.

  Photoshop does a folder with the name of PSAutorecover for the AutoSave files.

  for example

  G:\Photoshop Temp10867638828

  G:\PSAutoRecover\MyName\whatever. PSB

  

• Can I save or export passwords saved with Firefox in order to get back them in a new computer?

  I will soon get a new computer. Having a large number of websites and passwords saved in Firefox Mozilla respective access, it would be very convenient to be able to export this information to the new machine after installing Firefox, as you can do with bookmarks. Is it possible for password + Web sites?

  Note that you can also copy the files logins.json and key3db in the current profile folder to the folder of the profile on another computer.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Copy and paste files from Win 7 to XP via the Cmd prompt

  Hello

  I have a Win 7 PC and one PC XP network (wireless and using the same router).

  My goal is to copy and paste all the files that I have worked over the last 24 hours of my Win 7 PC to my XP PC, and this is the script that I have to do:

  c:\data - r dir |? {! ($_. {PSIsContainer) - AND $_.lastwritetime - gt (get-date) .date} |

  % {Copy-Item-path $_ .fullname-destination \\hyperv1\shared\backup}

  I presume that I type that in the prompt on a daily basis, but how better to customize the script, please?

  Say, for example, I have a file called WebSite10 (created in Visual Studio) that can be found here:

  C:\Users\Steve\Documents\Visual Studio\Website10

  on my Win 7 PC and I want to copy and paste it in the folder Documents shared on my XP PC.

  Thanks for any advice.

  Hello

  The question you have posted will be better suited on the Windows 7 IT Pro TechNet Forum, I ask you to ask this question on the link provided below for assistance.

  In Forum Windows 7 IT Pro

  Thank you.

• Since the update, I can't open a JPEG file: "Could not complete your request because the file was not found."

  My subscription to creative cloud updated Photoshop the other day. My iMac is running 10.8.5. Ever since this update, I can't open a JPEG file and get a message indicating "could not complete your request because the file was not found." I'm sure it's related to the update, but how can I cancel it and get things to normal?  (do not include your email)

  Post edited by: Eugene Fornario title should be brief, but descriptive.  No personal information in post.

  Hello

  Please refer to this article error: 'File not found' when opening JPEG files and try the workaround provided.

  Let us know if that helps.

  Kind regards

  Assani