I can't delete a file on my computer - I can not run it even more.

Similar Questions

• Diagnose the reason why I can not run (or even remove) an exe (JDK Installer)

  I have a portable Win7 provided by my company.  I'm supposed to have "admin rights" on the box.  In the past I have never had any problem with the installation of things.

  Today, I tried to download an installer for a newer version of the JDK.  After downloading the file, I tried to run it normally and it seemed that nothing happened (just return at the prompt).  I then tried to run it from a cmd, and it also seemed to do nothing.  I then even tried to remove it with "DELETE", and it says "access denied."  It was on a cmd run with 'run as administrator '.  I get the same results with a 'normal' cmd

  I checked that I could delete the other files in the same folder as the exe file.

  I then tried to inspect the security properties of the file.  From everything I see, I have 'Full control' on the file, including "read & run ' permission.

  I then installed the tools from SysInternals "AccessChk".  I just ran this without any options on the JDK installation file and an another exe in the same folder that I checked that I can run (although I have not tried to remove).

  I can't see what follows (with some info that have been omitted):

  ---------------

  JDK Installer:
  R the world
  RW .
  RW \Domain Users

  Another exe in the same folder:
  RW NT AUTHORITY\SYSTEM
  RW BUILTIN\Administrators
  RW .
  RW S-1-5-21-

  ------------------

  What could go wrong here?

  Hello David,.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproappcompat

  Thank you

• In Program Files > Adobe > Adobe > Adobe Patch files I have a zip file {95EC043C.. 200 MB since 15 December. Can I delete these files? Because I have experience "not enough RAM' much to the PS

  In Program Files > Adobe > Adobe > Adobe's Patch files

  I have a zip file {95EC043C-... of 200 MB since 15 December.

  Can I delete these files? Because I have experience "not enough RAM' much to the PS

  Hi again,

  You can still install, make sure just that take care you of your images, and your personal files and then go for the installation of Windows 10, 64-bit.

  All you need to do to re-setup is to download the Adobe Creative cloud application and then you can install LR and PS since the Application itself.

  • https://creative.Adobe.com/products/creative-cloud

  No need to pay again, it will recognize your id and password and allow you to download the applications that you are already a member of the subscription.

  ~ Rohit

• Im trying to delete a file from my computer...

  Im trying to delete a file from my computer to free up space sum but when I go to delete it is impossible to delete the file "C:\6ace0ee039abdce9ea240" said. Nothings lock or something. So I don't know what can someone give me an overview of sum?

  This is most likely a temporary file created by a security or other Windows update.  Restart the PC and see if you can delete it then.  If this isn't the case, then you may want to assess the question to seize the property and removing against evil, it could cause if it isn't a vestige.  In addition, he is unlikely to win a significant amount of disk space, clean as you do only puts off the coast of the inevitable hard drive upgrade - if the drive is full, get a larger.

• Windows backup: if I delete a file on my computer, it deletes the file on my backup too?

  I recently discovered that the feature of automatic backup of windows on my computer and I'm thrilled about it (I think...). So far, my method of backup was just copy and paste all my files on an external hard drive. This method works very well, but it of a lot of time because I have to open each file and include the files or documents are new since my last backup and then drag them over my external hard drive. Very labor intensive.

  Thus, windows backup will do that for me automatically? It will recognize the new files and save them to each backup of the future that I create? And what would you say if the already-saved files are renamed or reorganized on my computer? The backup file will recognize these changes? Or he will treat them as if they are new files (and then let me with duplicates on the backup file)?

  Also, after I backed up my files on my external hard drive, I want to be able to remove some of these files on my computer (in order to free up space on my computer). But these files will then always be on my backup file?   In other words, let's say I finished my initial backup and then delete some files on my computer... on my next backup, windows will see that I have deleted some files from my computer and think I also want these deleted my backup files? Or he'll just leave these files on the backup?

  Hello

  Yes, the Windows 7 backup allows you to create the backup schedule. If you have deleted files after the backup is created, the files must be available in the Windows 7 backup. In your new scheduled backup files are added incremental basis if they available even if you delete them from your computer. All you have to do is to restore them. You can restore individual files or folder tree.

  Some useful tips on Windows backup:

  • Make sure that you create the full backup or an Image of the computer before trying to scheduled backup
  • Create a daily backup schedule, using the Panel\Backup command and restoration centre
  • Verify that your scheduled backups are created every now and then
  • Run a test backup first, just to become familiar with the Windows backup
  • Try to use an external HARD drive that is bootable for backup and create a system restore disk. Just in case you need to restore your Windows 7 full

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• I deleted some files from my computer in win 7, that it is not in the recyclebin what to do

  I deleted some files from my computer in win 7, it is not in the recyclebin what to do? How do new pls help me

  Try this tool.
   
  Recuva
  http://www.Piriform.com/Recuva

• Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.

  Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.

  See if anything here help: https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

• Satellite M70-360: CEekey.eke can not run because its the missing dll

  I accidently deleted the ekecioctl.dll and now whenever I start my laptop (Satellite M70-360) I get an error message saying that CEekey.eke can not run because its the missing dll. Anyone know where I can download the dll?

  Thank you

  Hello

  The CEekey.exe seems to be part of the Toshiba E - key utility.
  Therefore, you should try to reinstall this utility to obtain the keys working again.

  Another clue; have you tried to restore the operating system to the early time point?
  XP supports the System Restore tool. You can easily put the BONE at an early stage and the E key should work again I hope ;)

• I can not run dinner dash hometown hero. He will be in charge, but will not play. He said that the program has stopped working. How can I fix?

  I can not run dinner dash hometown hero. He will be in charge, but will not play. He said that the program has stopped working. How can I fix?

  Hello

  Please contact the Microsoft Community and sharing this information with us.

  I'd like you try to perform a system restore to undo changes.

  See the article-

   

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

  Note:

  Perform a system restore will cancel all changes made on the computer before the show. You may also lose unsaved information as well. Proceed at your own risk.

  If this is not enough, then you must contact game support for assistance.

  Do not hesitate to contact us for any problem related to Windows. We will be happy to help you.

• Why you can not run portable applications on RT?

  Why you can not run portable applications on RT?

  Nothing is installed on the system. That's all, flash USB, a folder or drive.
  You don't have to install anything. So why can not run portable applications on RT?

  I know exactly what is a portable application. It requires no additional drivers installed or libraries to run on a system, if one is required that they are either built into the executable and extracted the runtime or are included in the same location as the executable and are referenced from this location.

  No portable application is not somehow the operating system to display the current status, error messages or generate logs for its operation. If it cannot accept input during its operation or generate a form of output it has no function. This is the basic description of a program to have one or the other or both.

  When you double-click an executable file is Windows (if it's the operating system) giving you the ability to open its location, see the executable file in order to select and issue the command to run. It's Windows that then loads this program in memory to run. If necessary, Windows that displays the dialog box to provide any input and display results or error messages generated by the program. If the result is a log file that it is Windows that allows access to the drive to create the file and the result is an error state in Windows that stores the status of the error, then it can be interpreted by another program. If the output is to change the status of the computer in a way, it's Windows that gives access to this device or component. The Hardware Abstraction Layer allows access to the hardware itself if necessary by a program and even that is a part of Windows.

  So I know what a laptop program is, more important still, I also know what is Windows.

• Can not run the program "keytool": java.io.IOException

  Hello
  
  I would like to follow the procedure to change the password
  glassfish server hosting APEX earphone
  using the change key word subcommand of past, but the keytool utility
  not found:
  
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config >/opt/glassfish3/bin/asadmin
  / opt/glassfish3/bin/asadmin
  Use "exit" to exit and online 'help' for help.
  asadmin > change of master-password mydom01
  Enter the current password > changeit
  
  Enter the new password > changedit
  
  Re-enter the new password > changedit
  
  Can not run the program "keytool": java.io.IOException: error = 2, no such file or directory
  Past change key word command failed.
  asadmin >
  Multimode command failed.
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config > what java
  / usr/bin/Java
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config >
  
  Glassfish entire works well outside it.
  
  keytool could be found in/usr/java/latest/bin/keytool.
  
  We need to have that in the path? There is no requirement in the
  Installation Guide for this, nor did the RPM installation adjust the system
  path accordingly.
  
  I hope someone can tell my how things should be in regards to keytool?
  
  Thank you, Tom

  Hi Tom,

  the procedure to change the password for the listener of glassfish server hosting APEX

  ... more like a topic related to GlassFish for me. I guess you will get the best answers to these questions in a GlassFish related forum...

  For what it's worth, I'll try my best even when:

  Can not run the program "keytool": java.io.IOException: error = 2, no such file or directory

  This seems to be a pretty clear error message: keytool , which probably is used to manage keys for users of GlassFish, was not found. This means, you are either running on an operating system that is not officially certified for GlassFish, or you GlassFish has not been configured correctly.
  You have run

  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config > which java
  / usr/bin/Java

  ... which means that you assume your GlassFish runs without being set JAVA_HOME. If that's true, I'm install you GlassFish correctly from this setting.
  Anyway, you have also discovered that

  keytool could be found in/usr/java/latest/bin/keytool.

  ... that is not + / usr / bin + and probably not in the way of global search of the user on whose behalf your GlassFish is running. Then, you can either create a link [*] for c++ / usr/bin/keytool + do (finally) to + / usr/java/more late/bin/keytool +, or you setup JAVA_HOME to be + / usr/java/last +.
  [*] Note that depending on your operating system, there may be more than one stage of indirection, for example my Ubuntu a + / usr/bin/java + pointing on + / etc/alternatives/java + which points on + / usr/lib/jvm/java-6-Sun/jre/bin/java + where + / usr/lib/jvm/java-6-Sun / + points to the directory containing the real JDK to use. You will probably find something like this on your system. My Ubuntu box has a link for + / usr/bin/keytool +, so I get when running "what keytool.

  We need to have that in the path? There is no requirement in the installation guide for that, nor the RPM installation has adjusted the path system accordingly.

  Again, this is not a forum of GlassFish.

  I hope my advice helps you solve your problem. If they are not, please choose the appropriate forum for your next post on this topic. And I guess, giving additional information about your OS and how you manage your JDK (and which version you use) help people here to help you.

  Thank you

  Udo

• Is it true that I can not run more than 60 Hz on screen?

  Is it true that I can not run more than 60 Hz in 640 x 480 on my laptop with nvidia go 7600? or is there a driver for my lcd screen...?

  Why do you want to change the screen on the TFT screen refresh rate?
  LCD monitors do not suffer the same problems as their predecessors of the TRM and the refresh rate does not simply mean the same thing. LCD or TFT monitors will provide excellent quality and resolution at 60 Hz.
  Its response time, brightness of the Image and the Image contrast ratio the most important question for a TFT or LCD monitor.

  Operating systems set the different default refresh rate. Windows 95 and Windows 98 (se) together the highest refresh rate possible. Running Windows NT operating systems such as Windows 2000 and Windows XP descendants, however, by default the value of the for the 60 Hz refresh rate.

• Mac Pro can not read SD cards more

  Hello

  I need help with a strong issue with my Mac Pro, who can not read SD cards more. Gluing of any player on any USB, an SD card is not recognized more. Strange also when I put a CF card in the same drive, it works and I can see the CF card on my desk.

  Someone at - it a response?

  (Mac Pro 3.1, latest El Capitan, several players used, same problem)

  What do say to recognize?

  Finder?

  Disk utility?

  System Profiler?

  OS X: about system information and System Profiler - Apple Support

  Have SD readers that you have linked?

  When it is connected with an SD card lists what System Profiler under USB?

  You should see the reader and the card.

• I have not upgraded to windows 7. He already windows 7 inside and can not run my original monopoly game. I want to remedy.

  I hope someone can answer my question. I bought a new computer with windows 7 in there and I can not run the original monopoly game in it. I want to play. It's better than the new games they released. can someone help me with this. s * address email is removed from the privacy *.

  Hi, amel.

  Let's first try the easy solution.  ClickStart, type compatibility in the research field, and click the enter key. This will bring up the resolution of the problems of compatibility of programs.  Click Next and it make a quick check on your machine.  It will ask you to Select the program that you are having problems with, and then click Next.  Clicktroubleshoot program,then check the box forthe program worked in earlier versions of Windows...  Windows XP (Service Pack 2)-click, then click on Next. Click on the box forstart the program. He will try to open the program as if you were using XP. Once the program is trying to open, click onNext. Now it will ask if it worked for you.  If so, click onYes, save these settings for this program. If you clicked Yes, every time that you open the program now he opens as if it was running under XP.  That if it worked!

  Sometimes this method does not work.  For these cases, there is a new feature called XP Mode, which will install a virtual machine before you run your program in.  This feature is available in the professional versions, full and Enterprise edition. It is not too hard to get set up. It actually installs a copy of Windows XP before you run your program in.   Here's a Microsoft article on how to get it set up: http://www.microsoft.com/windows/virtual-pc/.  XP mode now works even if you do not have the chip installed for hardware-assisted virtualization technology.

  Hope this helps,

  Barbara

• Updated Windows and now I can not run other programs on my PC

  Updated Windows and now I can not run other programs on my PC!  What can I do?

  Hello

  ·          Update you installed before the problem?

  ·          Do you have a code error message when you try to run any program?

  If the issue took place recently, you can perform a system restore that will repair return the computer to the point while it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.