I can't get my HP Deskjet 1050 A printer to connect to my wireless PC. How can I solve this?
I just bought a new printer Deskjet 1050 and can use it via the USB cable but I can't so he can be detected by the intermediary of wireless. Can anyone help?
I don't think that the HP Deskjet 1050 A is a wireless printer.
Look under connectivity here:
Tags: Windows
Similar Questions
-
Hello
I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.
It comes on it comes up with the error message:
Question: You have manually entered the name of the network (SSID) cannot be found.
Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
============================================================================================Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.
Help, please.
Thank you
In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.
-
I attempt to backup my iPhone several times and it does not backup. I received a message stating "several files were not available at the time of the backup. How can I solve this problem?
Hello Lope8725,
Looks like you are trying to backup either iCloud or iTunes, but you have found an error on files being unavailable. Can reply you with the exact wording or a screenshot of the message you are getting?
In the meantime, you can solve the problem with either of those two sections depending on whether or not it's iTunes or iCloud:
If iCloud backup could not be completed or if you can not restore
or
If your iTunes backup could not be completed or you cannot restore from a backup
See you soon!
-
I get the pop-up windows and windows that automatically open on my browser, how can I solve this
Do a scan for adware with Malwarebytes: http://malwarebytes.org/antimalware/mac.
(copy and paste the link above into the address bar of your browser).
-
I get an error message on itunes app crash coreaudiotollboc.dll How can I solve this
I get an error message on itunes app crash coreaudiotollboc.dll How can I solve this
These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. CoreAudioToolbox.dll belongs to Apple Application Support and are normally in
- C:\Program Files\Fichiers Files\Apple\Apple Application Support or
- C:\Program Files (x 86) \Common Files\Apple\Apple Application Support
where the name of the Program Files folder may vary depending on the region.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
-
I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?
Hello grandpa_bill,
Thank you for your participation in the communities of Support from Apple.
If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.
For more information, see get help using iCloud for Windows.
All the best.
-
I removed the toolbars so I could see below thinking that I could easily get them back, but I can't. How can I get back them? I can't even put a new web address now. Or refresh a page. Or go to the front/back. How can I solve this problem?
It depends on how you
- Choose the Mode "full screen" or
- unchecked toolbars
The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).
If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:
- Right-click in the empty space at the end of the tab bar
- Press the ALT key or the F10, the poster Menu bar, click View > toolbars
- Firefox > Preferences > advanced > General tabFirefox > Preferences > advanced > general tab
- Hold down the ALT key and type the letters of the keyboard V T
- the URL/address bar, buttons previous/next, refresh/reload buttons are located on the Navigation toolbar
- See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
- Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
- Also see-> http://kb.mozillazine.org/Toolbar_customization
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
I can't make or recive MY applewach, the onely thing I get is a notification of a missed call, what I can do about it, how can I solve this problem?
Hello
It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.
Otherwise, it can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
-To switch on: press and hold the side button until you see the Apple logo.
-
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
-
I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?
SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.
It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.
So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.
-
When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?
I'm not that computer literate and do not understand what needs to be fixed.
This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.
I use ESET Antivirus Node32 software.
Hello
1. What is the error message or an exact error code?
2 have you made changes on the computer before this problem?
3. you try to check the updates?
I would suggest trying the following methods and check if it helps.
Method 1:
Reset Windows Update components and then try to download the updates.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756
Method 2:
File system scan tool checker and then try to press Ctrl + Alt + Delete and check.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):
http://support.Microsoft.com/kb/310747
Please respond with more information so that we could help you more.
-
On startup, I get a notice that I entered missing RUNDLL 32 how can I solve this problem?
Hi TomNutt,
· Did you do changes on the computer before the show?
· What is the full error message?
Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
-
Using Windows XP Profwssional.
(1) when I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?
(2) can I use this feature when both computers are on the same network?
Hello
(1) you must configure your computer to use the remote control - see here:
http://www.winxptutor.com/raenable.htm
and don't forget to make the firewall exceptions
(2) this function works on the different network also (so a computer can be in the United States and one in Australia)
Note - a computer can have Windows XP (family or professional edition) and another may have Windows 7, Vista.
LC
-
I keep getting "C\WINDOWS\system32\rundll32.exe" when I try to do something in the 'Control Panel'. How can I solve this problem?
Hello
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed?
· What is the number and the model of the computer
Try the steps listed in the link below and check off the results: cannot find the Rundll32.exe file when you open the control panel: http://support.microsoft.com/kb/812340
-
I get an error rundll at startup... It is said c:\windows\wsaolich.dll How can I solve this
This happens whenever I start windows xp sp3
There is no file in Windows XP. This file was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware. If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.
For more information about how to use the Autoruns, please see:
Maybe you are looking for
-
How to stop a URL's InternetExplorer every time?
For some pages, I said once to open in Internet Explorer, but now I want to stop this feature for some of these pages. How?
-
How can I restart L360 - 14th Satellite Pro on an external keyboard
Toshiba Satellite PRO L360-14F Saves energy ToshibaHow can I restart laptop on an external keyboard, if it was shifted by the Toshiba power Saver in idle state?
-
file on the desktop got accidentally renamed
I have a lot of files on my desk. I just noticed that one of them accidentally got renamed to 'k' in the past. I assumed it was an accident when I thought I have received within an application, but rather was rename the file. How to get back its or
-
Hi all I am trying to extract frequencies to help extract information from your multiple. However, I am facing problem record the frequency, amplitude, and phase in the file. Give me an error (it can't be wired together as their data types (digital,
-
HP Pavilion 15-e034tx: upgrade HP Pavilion Notebook RAM
The laptop came with a 4 GB of RAM (total 2 slots, 1 vacancy location). What is the limit of the extension of memory for my laptop? It is 8GB per slot or 8 GB memory total? (I mean total memory = 8 GB or 16 GB?). If I could extend up to 16 GB, what a