I can't get my system restore to go back another day and restore point, none of them will click back

Similar Questions

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• I can't create a system restore point.

  I can't create a system restore point.  I'm told to group policy won't let me.  I got error 0 x 80070750

  Hello

  Method 1:

  I suggest to run the SFC (SFC scan) system on the computer and then try to create a restoration point and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose any amount of data while performing the check disk.

• can not get the system restore to work

  tried to get the system restore back to an earlier time. says I need to get rid of the useless programs.did who. I have also some icons for files, tools or downloads

  In addition to what has been mentioned, consider the following:

  First of all, what is the last time that the restoration of the system worked?

  Check your system restore settings:

  1. Click Start
  2. Right click on my computer
  3. Click on Properties.
  4. Click on System Restore
  5. If system restore is enabled, the column status of a player will show surveillance.
  6. If not, you can delete ""disable the system restore on all drives ' and then click on OK to activate "

  Is both as soon as you try to restore to the most recent available? If so, unless you have specific reasons to keep the previous restore points, clean the rest, so that you have the most recent restore point on the left.

  To do this:

  1. run Disk Cleanup

  2. click on more Options

  3. under system restore, click cleaning of

  4. click on OK

  This will free up the space. System restore needs a minimum of 200 MB of space to work.

  Reference: http://support.microsoft.com/kb/300044

  Hope this helps

  Post back if necessary

  _________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• whenever I get the error message and I can not get the system restore or the automatic updates touch

  whenever I try to use the system restore I get the message that it was impossible to restore to dat what I ever try to restore any file were change

  more my automatic updates keep coming up it downloads according to the full upgrade, then the icon disappears, then comes back and he wants

  upgrading again any suggestions

  Hi chuckdutton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the reason for the execution of the system restore on the computer?

  4. do you have security software installed on the computer?

  5. you receive similar message appears when you try with different restore points?

  There are various reasons for the system restore fail on the computer.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Also see the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Refer to the article below and try the steps mentioned, check if that fixes windows update icons that appear on the system tray.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• How can I get my system restore to work. It never restores any restore point.

  I have Windows XP Professional and my system restore does not work. How to restore? It does not restore any restore point.

  Required reading:

  http://bertk.MVPs.org/html/srfail.html

• I can't get the system restore to work. What I am doing wrong?

  "The response from the computer is always: cannot restore to this date.

  Maybe a conflict with your antivirus application.  See http://bertk.mvps.org/html/healthy.html (the server has a problem with several of the most relevant pages 1645 EDT Fri Sept 23.  If the pages do not load when you visit it, wait a bit and try again).

• Impossible to create a system restore point and get the error code: 0 x 81000202.

  Original title: could not create a system restore point

  I have Windows 7 Edition home premium.

  I can't create a system restore point.

  I go to control panel > system and security > system > system protection

  and get the following error message:

  There was an unexpected error in the property page.

  The VSS service uses the system restore does not work.

  See the event log for more information. (0 x 81000202).

  I also ran a sysscan but all right.

  How can I create a system restore point?

  Thank you very much

  David

  If you have any software backup as totalrecovery pro 9 or norton ghost, they prevent you from creating a manual restore point.  I have 9 pro full recovery and everything I do is to disable the Recovery Manager when I want to create a manual restore point.  There is no problem with system restore points created they work very well it is the manual of who are the problem.

  Frank

• SYSTEM RESTORE POINTS

  HOW CAN I CONFIGURE THE COMPUTER (VISTA) TO LIMIT SYSTEM RESTORE SPACE AND HOW CAN I DELETE THE SYSTEM RESTORE POINTS?

  Hello

  Phantom memory also holds your restore VSSadmin points it defines parameters.

  Control Panel - Backup & restoration Centre

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup
  and during times when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• All my system restore points are gone, can I get them back? They were here before, I did a restore earlier in the day.

  I have read through many of the issues with my problem similar but found no answers I thought applied to my question.  I use Vista Home Basic and it came on laptop. He began to get a blue screen, the other week that close... I signed on and it allows me to open my Cricket to go online and allows me to open IE and go online - I was for a few hours.  With all the previous still running I went to open AOL and the blue screen appeared again. I started to play and it seems that AOL is the reason.  System Restore fixed.  I could sign and use Cricket, IE and even AOL.  A few weeks later now I am online using IE and I had saved a few sites to my bookmark on the google toolbar.  I kept all the programs like I always do and clicked on AOL and of course, a blue screen and shut down.  I thought I'd make system restore as before... He's fine, but I noticed that when I went to IE my google toolbar was gone and I have several sites needed bookmarks so I played with the tools and disabled my toolbar and it permits etc. nothing helped so I defeated the system restore and signed for IE and google toolbar is back to normal but now AOL is causing the blue screen new.  I decided to try, then uninstall the google toolbar and simply re-install everything when I do a restore to get AOL works or to uninstall AOL and reinstall it again. I opened the system restore and that's when it opened and said there are no restore points on my system and take care to create a manual.  I'm afraid that if I do just that I lose the ability to restore my restore points, if there is a way (which means yes, you can restore the system restore points, but you must do before anything else, as if I created an it would ruin my chance to restore my 'old'?).  In any case, of course, I must have the computer checked as to why the blue screen is arise every few weeks but so far here, I want to do system restore to fix at the moment.  What can I do to get my restore points back?  Thanks in advance!

  Hi Diana,

  Thank you for answering... that's why I'm confused, I know not that restore points deleted as space fills up and also if you turn off your protection system but neither one of these grounds was the case.  I had a lot of space (from the previous use of sys restore, I see how many restore points can accumulate before deletion and it was not nearly that many) and protection of my system is on?  It just happened without reason that's why I was hoping that I could get back them due to abnormal circumstances.  I do not!  I have uninstall AOL completely and when I reinstalled it everything went well up to what he did and he opened up to find my connection type and of course, the blue screen appeared and stop.  Obviously, AOL, but I thought that a new facility would set as I had AOL since I was the new laptop.  I thought that maybe a file was corrupted or something and uninstall and reinstall would work but no luck.  I was going to do a complete reinstallation of my laptop all but before I do, I noticed I never had disks when I bought it, everything was installed (Windows Vista), but they do not include a disc of resettlement.  I don't know if this is how they do it now, or if mine was incomplete, so I guess I'll put hands on MS supports.  Thanks again!

  Hey CinnaBlaze

  you do not have a vista dvd to your computer preinstalled vista laptop has nothing to do with microsoft

  ask the manufacturer of the laptop or send a set of vista recovery discs and also ask them if you have a recovery partition on your hard drive of everything put to the standards of the plant and how to access a partition recovery with a certain combination of keys to start the process

  Walter, the time zone traveller

• After you install Microsoft fix it 50027 (A Fix DVD player) win. XP can't do a system restore. I get this response: "your computer cannot be restored to _Date_.

  I'm under Win. Prof. XP with service pack 3.  I had trouble burning DVDs and ran Windows Support difficulty it 50027.  After running fix it, 50027 I had problems with my CD-ROM/DVD-rom and my DVD RW drives.  That has been fixed by the uninstaller & reinstallingall my Roxio software, but I can't do a system restore more.   Before that, my computer worked perfectly.  I use Norton 'Internet Secruity"wich scans my PC on a regular basis for virsues.  I am sure I have no virus

  Norton can interfere with a restoration of the system successfully.

  Boot safe mode (press F8 at startup) and perform a restore of the system, safe mode.
  Which usually solves the problem.

  HTH,
  JW

• Hall 20: I can't do a system restore to overcome the refusal of the system to accept the password.

  I did a restore to factory on the Pavilion 20. Pressing me F11 has troubleshooting screen and I chose the system restore. All right

  I set up the UserName Admin and the password carefully (but don't think to do a password recovery disk).  I installed a different AntiVirus Norton application, a default value.  So I uninstalled Norton.  It required a reboot to complete uninstallation.

  This is where my problems started.

  Upon restart, the computer will not accept the password!  There is no mistake here.  It was carefully designed and entered in the creation of duing twice.  I even considered perhaps that I soon take my finger on the SHIFT key (twice) then tried many variations of SHIFT or no change for the capitals and even the next character in the password.  I restarted 50 times trying to get just one time and then I would like to choose a new password for connection.
  
  For the next, I thought I could just do a restore of the system from zero and re - configure again.  But now there is no option for me to use the system recovery.  This option is missing!  I spent many hours on searches of google for similar problems.  It's just not there.  I tried to use F10 and F11 to enter the system recovery.  I get to the menu troubleshooting and it has 3 options: Refresh uoir PC, reset your PC options and advanced.
  Clicking on advanced options gives me the system restore (a restore point (doesn't) usung) System Image recovery, startup repair, command prompt and UEFI firmware settings.
  
  I'm positn gthis in the hope that I can do a system recovery to the command prompt.  Is this possible?  If this is not the case, how can I do a system restore when the OPtion is not avaiiable?

  My question is: a complete system recovery was done, why it is no longer possible to

  Hello Newton51

  It will display the number of full model of the computer.

  I don't know what happened on your system but when you do the reset of the system, don't go not advanced.

  You should be able to click on reset your PC. That will erase the C: partition and reinstall Windows.

  

  When its finished, and you get to the part where it asks you to create a password for the user, LEAVE BLANK.

  Restart to make sure you can connect without using a password.

  IF you succeed at this stage, create your HP Recovery Media via the HP Support Assistant.

  If you enter an impasse once again, recovery media will wipe the drive and reinstall everything, including the recovery partition.

  NOTE: HP will allow you to record only one copy of the recovery media, so not to interrupt the process when you start.

  Now remove Norton and restart.

  Install this that never new you want security.

  When you're done, go to your user profile and carefully create your word password but do not close yet.

  Create the key to reset password on a USB key.

  Now restart and test your password.

  You have a USB reset if it doesn't.

  ----------------------------------------------------------

  If you are not able, or do not succeed to reset the PC, you have two options. Use the MS media creation tool to create recovery media (from another computer).

  Then, reinstall Windows 8.1 and download your HP drivers and install them.

  Or

  Order directly the appropriate recovery of the HP Support media.

  Contact HP worldwide | HP® official site

  Choose the country you are. Choose Help, then to the House.
  Enter the full product number and follow the prompts to contact Support.

  Chat with an agent will ensure that you get the appropriate recovery media.

  Hope that helps.

• Browser crash, restart on its own, can not do the system restore. Help!

  OK, so I tried EVERYTHING I know how to do, and some things I did research.

  Whenever my computer restarts itself, I get an error message saying that there is a faulty driver.

  I checked my drivers with the audit tool, nothing.

  I uninstalled all unnecessary programs I could find (nothing critical, just programs like Glary Utilities, Acrobat, Flash etc..).

  Eventually I got to a point where everything I did was to get worse, and my computer told me that Windows did not start upward.  I rebooted in safe mode and tried to do a system restore.  Cannot restore point to restore I get an error indicating that the system restore was not successful.  I tried FOUR different restore points.

  I'm at my wits end!

  I don't have my Windows XP cd, or one of the disks with the computer came.  This used to be my computer at work, but let me keep as part of my departure, so all the disks are in the old company.

  Please help :(

  Computer: Dell
  Intel Core 2 Duo 2 G of RAM, Windows XP Professional

  (For some reason, the police in your post is a very light gray!)

  Please transmit the full text of the error message.

  You used the phrase "everything I've done." In addition to uninstall unused programs, what else do you have?

  If your company gave you this PC, they should have you good discs too. Fortunately, Dell XP Pro installation CD are ubiquitous and interchangeable. First of all, contact Dell to see if they can issue you a. Otherwise, see if anyone you know has one.

  A number of security (for example, Norton and Zone Alarm) programs interfere with the restoration of the system. If you identify your security programs, we can tell you how you can get the system restore to work. For now, these pages can help:

  http://bertk.MVPs.org/html/srfail.html

  http://bertk.MVPs.org/html/symantecdoc1.html

  You should be able to disable your restarts automatically in this way:

  http://pcsupport.about.com/od/tipstricks/HT/disautorestart.htm

  Finally, what is the status of this PC malware?

• The system restore points, how can be stored/kept?

  I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

  In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

  And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

  Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

  Hey, Jose,

  I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

  I'll try to put your comments in quotes, with my response immediately after, flea.

  The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

  "Here are some reasons that XP will remove RPs.

  'http://support.microsoft.com/kb/301224 '.

  • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
  • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
  • No disk compression
  • Did not display the warnings system restore.
  • I do not turn off System Restore fo any player.
  • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
  • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
  • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
  • I don't think I'm under low disk space.    :-)
  • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

  "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

  http://support.Microsoft.com/kb/950249

  This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

  • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

  "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

  • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

  "If they are all absent, it always seems that a human element involved somewhere."

  • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
  • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
  • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

  "To answer your question:

  The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

  • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

  I'll certainly post the info you suggested in the post on the SP3 forum.

  "Do or do not. There is no test. »

  • "Luke, the force is with you." :-)