I can't install Windows 2000 server tools

Similar Questions

• can we install windows 2000 on the i3 system

  can we install windows 2000 on the i3 system

  Depends on if you can get the drivers for your Windows 2000-compatible hardware; you need to verify that hardware manufacturers laicists site to check the drivers. Most of the hardware manufacturers are not even the creation of drivers for Windows XP that is newer than Windows 2000.

  Check out the thread below (specifically the post from Andre Da Costa) from earlier today about the installation of Windows 2000 as a virtual machine.

  lnstal dual boot win 2000 on existing Win7Pro64bit
   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/lnstal-dual-boot-win-2000-on-existing-win7pro64bit/fac80945-70f0-4e18-9c1a-65acbb1ec85e

  Kind regards

• can I install Windows 2003 server in my computer hp laptop pav14-v021tu

  Hai

  My system came with windows 8, when I bought.

  But now I thing I finstalling windows server 2003 in this laptop, I heard from my local technician some computers laptops hp does not support Server 2003 (he said need some drivers from hard disk sata hard or something like that)

  As I have not super-hotel with this stuff,

  some we can't so please say argues this model the windows sever 2003 if so this laptop has no other than the Server 2003 addinational drivers to work

  Thank you

  Hello:

  The technician is correct on the sata drivers are needed.

  The problem is that your laptop is an Intel 4th generation of processor and chipset of the 8 series.

  Intel develops not all drivers sata for this chipset, so windows XP and 2003 server will not install on the PC with this chipset.  Nor are there at - he graphics drivers for Windows 2003 server, and probably many other features would not have driver support for hardware that your PC has.

• RVL200 and Windows 2000 Server - can not access network resources via VPN

  I am new to the VPN, and I feel I'm missing something very basic in my configuration. I just installed a RVL200 as the gateway for my corporate network router.  The network includes a Windows 2000 Server that acts as server DHCP and several PC and a printer.  I was able to "establish a SSL VPN tunnel" home connection to the router, but after recording in everything I see is the screen of virtual Passage - one with lock icons - otherwise I am inside the router.  The statement shows that I am connected.  Once the tunnel is established, what am I supposed to do to get computers to the computers on my network?  I can ping all computers on the network using their LAN address.  I'm supposed to see a choice of network resources to get to this point?  I put the router as a trusted site in the server and even tried to disable all firewalls, but I see that the VPN screen with icons.  I don't know how to proceed from here because I don't know what I'm supposed to see.  Thanks for any help that you can give to a newbie!

  The SSL connection is only for the VPN router. To access the computer, you can use Windows Remote Desktop connection. So that you can access to remote computers on the network, or you could look for 3 third-party software for remote access

  Hope this helps

• How can I access the Internet in Windows 2000 server w/AD?

  I installed the unit in the Windows 2000 server as AD and DNS server is the local IP address in the ownership of the network.

  How can I set DNS server to connect to the Internet?

  Thank you

  Under the server name in DNS, you will see the SEARCH BOX towards the FRONT. There will be a POINT "." it. Delete the point, close dns, dns or reopen and forwarders will be available.

• More older PowerEdge 2650 has been accepted, in the search of Windows 2000 Server to install.

  Hello and thank you for reading this note.  First time poster here. Please excuse the bad post...

  I was given a Dell PowerEdge 2650 (dual Xeon), which has been deleted.  There is a license sticker on top for Windows 2000 Server..., but this product is no longer available from Dell.  Technical support proposed contacting Microsoft about the availability of an installation CD.

  I've been wandering the Microsoft site to research to find out where to contact (e-mail, phone, Mail US?) about this... and turn to this group for assistance.

  Who should I contact?

  Your time is appreciated.

  Hello

  You can take a look at the link below. Product support you requested is completed. If you want a copy of the OS, I suggest to do a search on your browser to get a copy
   
  http://support.Microsoft.com/GP/lifeselect

• Cannot install agent converter on Windows 2000 server

  I was unable to install the converter on a Windows 2000 Server agent.  Initially, I tried remote and encountered a 1603 error which I think is a generic windows installer error.

  So I moved the VMware converter-all-4.3.0 - 292238.exe for the Server Windows 2000 itself and ran the exe there hoping to install the agent.  However, when you run the exe file that I meet "VMWare vCenter Converter Standalone requires Windows XP or later."

  Windows 2000 Service pack 4.

  1.2 GB free on the C: drive, 25 GB free on D:

  From the local administrator account

  Have deleted the domain server (it is now in its own working group)

  Have applied the latest updates from Ms.

  Restarted.

  Same mistake.

  Would appreciate any suggestions.

  Install the Converter 4.0.1. Your Version (4.3) does not support Windows 2000 more.

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vcenter_converter_standalone/4_0

  Click on "View history" to see the 4.0.1 version.

  Concerning

• Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  I have a PowerEdge 2850 server, that when he was initially put in place (by someone else) had Windows 2003 R2 top.  However, when they put in place, the partitioned the C: drive with so little space that it is running out of space.  We got a newer Dell server and I turned that 2850 off the coast.  It was interrupted for a month or two.

  But I would like to use it as a backup of database server.  Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  You need to install RAID drivers during the installation of 2008R2.

  1. Configure and initialize the RAID in the CTRL-M utility.
  2. Download and extract the drivers put on USB (or CD).
  3. Start on media 2008R2.
  4. On the screen that asks you where you want to install Windows, click on load a driver link at the bottom left.
  5. Navigate to the location of the RAID drivers.
  6. Choose the drive to install, then install.

• VCB with Windows 2000 Server before and after! Does not!

  In our configuration (esx3.5, vi2.5 and vcb 1.5) we have problems get the pre post scripts running in Windows 2000 Server. It does not at all pre/start scripts. We need this because we have some strange databases that must be stopped before the snapshot and started after.

  The 2000 machine is fully updated, and the esx servers are updated 4.

  I also tried in a test environment with esx3i fully updated (beyond update 4) and vcb1.1

  Pre-Post controls work perfectly in 2003 (not yet tested in 2008).

  What I tried:

  • Disable-ing the SyncDriver (must be a solution for Server 2000 with Exchange 2000)

  • Place scripts to a location different (C:\WINNT or C:\Windows or C:\Program VMware Tools\backupScripts.d

  • Adding C:\Program VMware Tools\backupScripts.d to the $PATH variable so that the script can be run from anywhere

  • Reinstall the VMWare tools.

  The command I used to get the backup:

  v h vcbMounter.exe *. n u .local \n*-ipaddr:vcbtest. .local - r c:\vcb\vcbtest-full-01 t m nbd fullvm

  I also tried adding the switch "0 q" or "q 1".

  No solutions seem to work. Does anyone have any ideas?

  Greetinx Atze

  It works for me with a C:\Windows folder (even if windows is installed in C:\winnt),

  with files like pre-antigel - script.bat and post-thaw - script.bat

• After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8.

  After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8. Update back me to http://support.microsoft.com/kb/2497281

  Article ID: 2497281 - last review: January 18, 2011 - revision: 1.0

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000, or Windows Server 2003 if these versions of Windows are not updated with the latest Service Pack

  But I have service Pack 3.  IE8 fails, install a convenience store, but after following the instructions there is no difference.

  I am at a loss for the next steps...

  There was problems with the server for updates for a few weeks now...

  Many people say that download and run the Update Agent stand-alone file solves this problem:

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  For more information:

  http://support.Microsoft.com/kb/943144

  For later use, it is not necessary to use all the steps you mentioned. You can upgrade directly from SP1a to SP3.

• Convert Windows 2000 Server

  Hi, am trying to convert a Windows 2000 Server, already has SP4 installed, I said that we need to use and old version of the converter, it's 3.03 or something like that, anyone know where I can download it, we later independent.

  Thanks in advance,

  John

  http://downloads.VMware.com/d/details/conv_303_starter/ZGQqYkAlaGJAZA==

• How to install Windows 2000 on Equium A200-1VO?

  Hello

  Can someone help me?

  I would like to install Windows 2000 on the Toshiba Equium A200-1VO laptop, but I need the drivers to do this.
  I have tried the Toshiba web page but cannot find the drivers.

  Can someone please?

  Thank you

  You will not be the drivers because this Vista designed for laptop is not supported by this old operating system. Maybe you can find the drivers for Windows XP Home edition, but not for W2000.

  All you can do is search for the drivers on the net and hope you have success with it.
  I don't know why you would do this, but perhaps you should accept that at some point Toshiba must say stop and don't waste time with the support of the older operating system. I also believe that 0.01% people want to use this old operating system on new generation laptops.

  There is no sense to make support for W2000. What do you think about this?

• Cannot install Windows 2000 on SatPro 4600

  Hello

  I have a SatPro 4600, earlier, I got ACPI Bios error when you try to start Windows.

  Is it possible to disable ACPI in the Bios, I couldn't find any option in ACPI Bios 2.60 to turn it off.

  The I formatted the hard drive and try to install Windows 2000 from scratch. But for Setup is copying files to start the installation program, it comes up with an error message.
  "Setup cannot copy the file"File_name"

  And will not let me continue with the Setup program.

  Help, please.

  Hello

  I can't help you much about it, but maybe this article can help you. Check http://support.microsoft.com/kb/319344/en-us

  Good luck!

• can I upgrade windows 2000 pro for Windows XP?

  can I upgrade windows 2000 pro for Windows XP?

  Hello

  Note Windows 2000 and Windows 2000 Professional can only be upgraded to Windows XP Professional. You cannot upgrade Windows 2000 to Windows XP Home Edition.

  "How to install or upgrade to Windows XP"

  http://support.Microsoft.com/kb/978307

  What specifications are needed for XP.

  "System requirements for Windows XP operating systems"

  http://support.Microsoft.com/kb/314865

  "Taken Windows XP supported upgrade paths"

  Microsoft Windows 2000 Professional >

  Windows XP Professional Retail (full) version
  Windows XP Professional Upgrade Version
  http://support.Microsoft.com/kb/292607
   
  "The upgrade to Windows XP Pro in Windows NT/2000"
  http://www.winsupersite.com/article/product-review/upgrading-to-Windows-XP-Pro-from-Windows-NT2000
   
  See you soon.

• HPC Pack 2008 R2 can be installed on the server 2008R2 Core Edition?

  HPC Pack 2008 R2 can be installed on the server 2008R2 Core Edition?

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.