I can't ping the server to the client in the network of the vm.

Similar Questions

• Why I can't ping the internal network?

  I configured a remote VPN access. I can connect my login and my password, but I can't ping any computer on the network in-house. Please helpme... the router configuration is:

  SH run.

  AAA new-model

  connection of local AAA VPN authentication.

  local authorization AAA VPN network

  username vpnuser password 0 vpnpass

  !

  crypto ISAKMP policy 1

  md5 hash

  preshared authentication

  Group 2

  !

  crypto ISAKMP client configuration group HOME

  key 123456!

  DNS 10.10.10.2

  VPN - D pool

  include-local-lan

  !

  Crypto ipsec transform-set esp - the esp-hmac-md5 TEST

  !

  dynamic-map crypto VPN 1

  transformation-TEST set

  market arriere-route

  !

  VPNSS crypto map list of authentication of VPN client

  card crypto VPNSS VPN isakmp authorization list

  crypto card for the VPNSS client configuration address respond

  map VPNSS 1-isakmp dynamic VPN ipsec crypto

  !

  interface FastEthernet0/0

  Description ==> link to ISP<>

  DHCP IP address

  NAT outside IP

  card crypto VPNSS

  !

  interface FastEthernet0/1

  Red ==> Lan description<>

  IP 192.168.1.1 255.255.255.0

  IP nat inside

  local pool IP VPN - D 192.168.20.1 192.168.20.20

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 dhcp

  !

  IP nat inside source list 1 interface FastEthernet0/0 overload

  !

  access-list 1 permit 192.168.1.0 0.0.0.255

  Hello

  I guess you get an IP address from the pool and the route is available in the router's routing table. In this case, you will need to tell the NAT router not the intended traffic to the VPN client:

  IP nat inside source map route sheep interface FastEthernet0/0 overload

  access-list 101 deny ip 192.168.1.0 0.0.0.255 192.168.20.0 0.0.0.31

  access-list 101 permit ip 192.168.1.0 0.0.0.255 any

  !

  sheep allowed 10 route map

  corresponds to the IP 101

  !

  The following link contains many examples: http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html

  HTH

  Laurent.

• I can't ping the interface inside of asa or telnet, when I came across the anyconnect vpn

  Hey Cisco net guys pro

  When I connect via anyconnect VPN to ASA 9.x, OS, I cannot ping inside
  the interface of asa or telnet, but I could ping at the interface of the router address
  ASA, the same two subnet

  Telnet 0.0.0.0 0.0.0.0 inside

  ICMP allow any insid

  Hi Ibrahim.

  Try 'inside access management' and let us know how it rates.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Main server cannot ping the server 2 to another location, but the 2nd Server can ping the backend

  I have 3 servers: server and 2 servers to files in another country.

  My main server can only ping the 2nd file server.

  But both of our servers in 2 files from another country can ping on the principal server.

  In short, I can not away to the first file server.

  The settings on both servers of files are the same. And I don't have access to the 2nd file server issues using the main server.

  If someone has the patience to help me understand the question?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Can not ping so allow the engine to Base on Windows Server R2 filtering 2012

  Hello

  My windows platform is Windows Server R2 2012.

  My problem is that I can't ping the server during execution of the server BFE.

  I had already opened the ICMPv4 and v6 in the inbound rules. I also had to open inbound TCP 3389 port.

  I have once again allow all traffic entering the firewall rules.

  I tried to ping; error - request time-out

  I tried Telnet; No output.

  Can I know how to activate the ping while the BFE is running?

  Thank you

  Kind regards

  Aghiles

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Cannot get SW1 to the second network of ping and can't get the HQ router to ping SW1.

  Hello the forum community.  I am new to Cisco Configuration and cannot understand why, in the attached packet tracer file, I can't have my SW! switch to ping to the gi0/1 interface of the branch office router and beyond.  I also can't understand why I can ping to the gi0/0 interface on the router in the branch office router HQ, but cannot ping the switch SW1 and beyond.

  Ideally, I'm trying to configure the network so that PC1 can ping 172.16.1.100, which is a loopback on router HQ.  I ping the closure of the branch office router, but not the switch SW1.  I cannot ping the gi0/1 interface on the router of the branch of the SW1 switch and do not understand why.  I can also ping the gi0/0 interface on the router in the branch office router HQ, but cannot ping the switch SW1 of the HQ router.

  PC1 - 10.1.1.100 255.255.255.0

  SW1 - VLAN 1 - 10.1.1.11

  Branch gi0/0 - 10.1.1.1 255.255.255.0, gi0/1 - dhcp assigned as 209.165.201.1 255.255.255.224, dynamic NAT activated with access-list 1 (permit 10.1.1.0 0.0.0.255), the pool name is NAT_POOL with the address range of 209.165.201.5 - 10 255.255.255.224 as NAT address range.  I can see it working with debug ip nat active when I ping the router address 10.1.1.1 HQ, although I have test the ping without NAT and it is always successful.  Gi0/0 inside the nat, g0/1 outside the NAT.

  HQ gi0/0 - 209.165.201.2 255.255.255.224, dhcp server enabled to provide an address for the router in branch gi0/1.  I had to add a static ip route 10.1.1.0 0.0.0.255 209.165.201.1 in order to be able to get the ping to the router HQ to branch router gi0/0 to work.  Don't know if there is a better way to do it, but it's the only way I could make it work so far.

  You will need to rename the .txt file, attached to. pkt.

  Thanks for any help!

  Hello

  The switch has ip routing enabled, if so disable it and give it a default gateway instead

  no ip Routing
  IP default-gateway x.x.x.x

  RES

  Paul

• Cisco 5505, inside, I cannot ping the external IP of the router, but inside I can ping anything else

  Hello

  5505 Cisco's internal IP: 10.10.0.1 static, securty level 100

  External IP of Cisco 5505: 36.X.X.23 Dhcp, 0 security level

  of within peut all host external example ping by host 10.10.0.3 to google.com

  inside peut ping all domestic example of the host, host 10.10.0.3 to 10.10.0.5 included the internal IP of Cisco 10.10.0.1

  inside peut ping ip network address different on the same network from my router external example the host 36.x.x.25

  cannot ping inside the IP 36.X.X.23?

  from outside peuvent ping the IP 36.X.X.23

  outside peuvent ping different extenal network 36.X.X.X network ip

   
  How can I ping the 36.X.X.23 of the Interior, any suggestions?

  It's called background management which is not supported in the ASA

  https://Tools.Cisco.com/bugsearch/bug/CSCtd86651

  That's why is not and this will never work the ASA design does not

  It will be useful.

• Cannot ping the default gateway with Centrino Advanced-N 6235 on XPS 12 but CAN connect to the Internet

  I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card.  I can't ping the default gateway with the wireless card.  When I use a USB network adapter, I can ping the default gateway for the wired connection.  I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network.  I am trying to run a program to connect wireless to a projector.  I have two different programs for the two different projectors.  I can connect by cable but not wireless.  I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card.  I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors.  They all have two windows 8 Pro.

  I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?

  The solution of the problem by chance.  I was connected to the computer with a different network than what has been used to authenticate user account on the wireless.  When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked.  Go figure!

• VM on NW even can't see the other

  Hello

  We currently have a NW 4 PC.  One is a windows 2003 domain controller that also acts as a DHCP server.

  2 PC are under windows 2003 with VMware server, run a virtual machine containing a particular set of software.   Virtual machine use bridged NW and have an assigned IP address of the domain controller is registered on the domain.  The firewall has been disabled on all machines (the NW is private with no Internet connection).

  the address of the host PC1 i.e. = 10.0.0.30 (Windows XP)

  PC1 VM address = 10.0.0.40 (Windows 2003 server)

  PC2 = 10.0.0.50 host address (Windows 2003 server)

  Address of VM PC2 = 10.0.0.60 (Windows 2003 server)

  The domain controller, host, all machines in the NW (physics and VM) machines can be crazy, and have a response time, which makes sense, given that they are all connected to the same switch.

  However, the virtual machine on PC1 can not ping the VM on PC2 and vice versa.  Also, using windows Explorer NW that it is not possible to browse the files shared on of VM1 VM2.

  Is there a framework and limits that I missed in what concerns the multihost and VM from the NW?

  Any help/suggestions would be greatly appreciated.  Thank you!

  Apart from the need to give the Windows OS cloned a new identity (SID, etc.) check files .vmx of guests of the duplicate MAC addresses.

  You can also use "ipconfig/all" in the prompt.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• Site to site VPN tunnel - cannot ping the second interface of the firewall peer inside2

  I have two ASA 5505 firewall each with a basic license: FWa and FWb. currently there is a VPN tunnel between them work. I added a second (inside2) interface to the firewall, FWb, but I can't ping firewall FWa, so that I can ping the inside interface of FWa.

  I can ping the FWb inside interface 192.168.20.1 from the FWa inside 172.16.1.1 interface, but I can not ping to the 10.52.100.10 of the FWa FWb inside2 interface. I can not ping the gateway host FWa 10.52.100.1.

  I show the essential configuration of two firewalls as well as the debug icmp output on the two firewalls that I ping the internal interfaces and of FWa FWb inside2.
  =========================================================

  Here is a skeleton of the FWa configuration:

  name 172.16.1.0 network-inside
  name 192.168.20.0 HprCnc Thesys
  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name S.S.S.S outside-interface

  interface Vlan1
  nameif inside
  security-level 100
  IP 172.16.1.1 255.255.255.0
  !
  interface Vlan2
  Description Connection to 777 VLAN to work around static Comast external Modem and IP address.
  nameif outside
  security-level 0
  outside interface IP address 255.255.255.240

  the DM_INLINE_NETWORK_5 object-group network
  network-object HprCnc Thesys 255.255.255.0
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  network-object HprCnc Thesys 255.255.255.0
  ring53-network 255.255.255.0 network-object

  outside-interface of the access-list extended permitted Outside_5_cryptomap ip host object-group DM_INLINE_NETWORK_3
  inside_nat_outbound list extended access allowed inside-network ip, 255.255.255.0 DM_INLINE_NETWORK_5 object-group
  permit access list extended ip host 173.162.149.72 Outside_nat0_outbound aus_asx_uat 255.255.255.0

  NAT (inside) 0 access-list sheep
  NAT (inside) 101-list of access inside_nat_outbound
  NAT (inside) 101 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access Outside_nat0_outbound

  card crypto VPN 5 corresponds to the address Outside_5_cryptomap
  card crypto VPN 5 set pfs Group1
  VPN 5 set peer D.D.D.D crypto card
  VPN 5 value transform-set VPN crypto card
  tunnel-group D.D.D.D type ipsec-l2l
  IPSec-attributes tunnel-Group D.D.D.D
  pre-shared key *.

  =========================================================

  FWb:

  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name 10.51.100.0 ring51-network
  name 10.54.100.0 ring54-network

  interface Vlan1
  nameif inside
  security-level 100
  address 192.168.20.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP D.D.D.D 255.255.255.240
  !
  interface Vlan52
  prior to interface Vlan1
  nameif inside2
  security-level 100
  IP 10.52.100.10 255.255.255.0

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_2 object-group network
  ring52-network 255.255.255.0 network-object
  object-network 192.168.20.0 255.255.255.0
  ring53-network 255.255.255.0 network-object

  inside_nat0_outbound to access extended list ip 192.168.20.0 allow 255.255.255.0 host S.S.S.S
  inside2_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_3 S.S.S.S ip host

  outside_1_cryptomap list extended access allowed object-group DM_INLINE_NETWORK_2 S.S.S.S ip host

  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside2_nat0_outbound (inside2) NAT 0 access list
  NAT (inside2) 1 0.0.0.0 0.0.0.0

  Route inside2 network ring51 255.255.255.0 10.52.100.1 1
  Route inside2 network ring53 255.255.255.0 10.52.100.1 1
  Route inside2 network ring54 255.255.255.0 10.52.100.1 1

  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set pfs Group1
  outside_map game 1 card crypto peer S.S.S.S
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  outside_map interface card crypto outside

  tunnel-group S.S.S.S type ipsec-l2l
  IPSec-attributes tunnel-group S.S.S.S
  pre-shared key *.

  =========================================================================
  I'm Tournai on icmp trace debugging on both firewalls and could see the traffic arriving at the inside2 interface, but never return to FWa.

  Ping Successul FWa inside the interface on FWb

  FWa # ping 192.168.20.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.1, time-out is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.1 ID = 32068 seq = 23510 len = 72
  ! ICMP echo reply to 192.168.20.1 in outside-interface ID = 32068 seq = 23510 len = 72
  ....

  FWb #.
  Echo ICMP of S.S.S.S to 192.168.20.1 ID request = 32068 seq = 23510 len = 72
  ICMP echo reply 192.168.20.1 S.S.S.S ID = 32068 seq = 23510 len = 72
  ==============================================================================
  Successful ping of Fwa on a host connected to the inside interface on FWb

  FWa # ping 192.168.20.15
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.15, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ! ICMP echo reply to 192.168.20.15 in outside-interface ID = seq 50862 = 18608 len = 72
  ...

  FWb #.
  Inside outside:S.S.S.S ICMP echo request: 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ICMP echo reply to Interior: 192.168.20.15 outside:S.S.S.S ID = seq 50862 = 18608 len = 72

  ===========================
  Unsuccessful ping of FWa to inside2 on FWb interface

  FWa # ping 10.52.100.10
  Send 5, echoes ICMP 100 bytes to 10.52.100.10, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ? Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ...

  FWb #.
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  ....

  ==================================================================================

  Unsuccessful ping of Fwa to a host of related UI inside2 on FWb

  FWa # ping 10.52.100.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.52.100.1, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.1 ID = 11842 seq = 15799 len = 72

  FWb #.
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72

  =======================

  Thank you

  Hi odelaporte2,

  Is very probably the "access management" command is not applied in the second inside, only inside primary (see the race management) which will confirm.

  This command can be applied to an interface at a time, for example, if the law is now applied to the inside, it can not be applied to the inside2 at the same time.

  It may be useful

  -Randy-

• VPN Site-to-Site - cannot ping the router's internal IP address

  Hi guys,.

  I configured a VPN site-to site between two routers, everything works well except ping the internal (LAN) IP of a router.

  Everything works fine: ping the hosts through the tunnel in both feel.

  Routers that I use:

  -IOS 1841: M3 15.0 (1)

  -2811 IOS: 15.0 (1) M5-> here is the problem. I can't ping the inside interface of the router.

  I checked its ipsec counters and it seems that it does not send packets through the tunnel when I ping from the LAN interface.

  #pkts program is not incrementing.

  Anyone had this problem before?

  Thank you very much.

  Best regards

  I think that happens because when the router responds to icmp request he gets is outside interface IP (not the IP Address of the inside interface, wich you are trying to ping) as the source of a package. If icmp-response does not go in the tunnel, because the IP address in the router's external interface is not included in the crypto-acl.

  Solution to this, if it's correct guess, is to add the router's external IP to the crypto-acl.

• ESX host cannot ping the default gateway.

  Hi Experts,

  I have connected ESX hosts to switch cisco as well by the ILO and other ports.

  Cisco switch configuration;

  int gig 1/0/21 and 1/0/13 gig and gig 1/0/14 are configured as access ports because they are carriers/tagging vLan as a 306.

  Cisco switch, I can ping the ip address of the ILO, but I can't ping the IP address management and vice versa.

  IP Managment

  10.197.204.10

  255.255.255.0

  10.197.204.1

  VLAN 306

  Attached the screenshot shown in the diagram.

  your help will be appreciated.

  Concerning

  Don't know what it is, but there must be something simple that you miss

  Let's go through each step of configuration for both ESXi network connections (ILO work already, so we do not touch).

  Check the configuration of switch port physical interface GigabitEthernet1/0/13 and 1/0/14.

  switchport access vlan 306

  switchport mode access

  spanning tree portfast

  Only connect the cable network for vmnic0 to host and make sure what vmnic0 presents itself as 'connected' in the DCUI

  

  Make sure the VLAN ID is empty.

  

  Make sure you then the IP settings are correct (IE without typos,...) and restart the management network from the main menu.

  André

• VMs that newly set up cannot ping the host

  A few days ago vSphere VMs worked well on nested host A that was vSphere, too. Then, install a vDS and place all hosts. He because of problem that guests could not ping each other. But, other virtual machines (I mean windows OS above) can always ping the host. So, moved the hosts of the vDS and removed the vDS, the problem is there. And implemented a few new virtual machines, what operating system are vSphere, too on the nested host a. They can only ping itself, but cannot ping on nested host A, too. Then, remove the data center and set up a new. the probel is still here.

  The problem should be soon after vDS, how can I solve this problem?

  the configuration of these new virtual machines are inpicture.

  my thought here, you forgot to activate rear promicious (security) on vSwitch0 & 1 after the migration, both of vNDS

  http://www.no-x.org

• IPv6 can not ping 2nd service console

  I configured a new vswitch with a service console and a vmkernel to use IPv6 and IPv4.

  I can ping to the service console and vmkernel IPv4 address. But I can only ping the service console IPv4 address.

  Why something like that happens? I checked to see if it was a duplicate address, and he wasn't.

  Thank you

  Is it using vSphere4?  There is no requirement for the ports of service console to use iSCSI, now.

  Can you provide the output of esxcfg-vswitch - and esxcfg-vmknic - l that I can see what looks like your network config?

  In addition, you will be able to ping the ESX storage use the command vmkping?

  If you are able to ping both directions, getting newspapers in storage and the ESX host around time of discovery would be the next piece of useful information.

  Thank you

  Andy

• Unable to see the computers in the workgroup or server to print to my HP laptop, but I can all ping and access the internet through the router.

  I have a laptop HP with XP pro. I have a network with 2 computers laptops (Dell and HP), 1 office and 1 DP300U DLINK print server with a static IP address. I use a LINKSYS WRT110 router. Everything is connected through this router. I can ping ALL laptops, the office and the print server. I can access internet from all laptops and office. All THE MACHINES are in the same workgroup. Only from my DESKTOP (XP HOME), I can click on FAVORITES NETWORK, click VIEW group of WORK COMPUTERS and I can see the other compters and the print server. However, since my computer Dell laptop or HP LAPTOP (XP PRO) I can PING the router and the journal in it, all the other machines and print server but can NOT SEE THE OTHER COMPUTERS or ACCESS THE PORTABLE HP computer or the other laptop. I turned off all firewalls and firewall McAfee (PORTABLE HP computer) and still no joy. I think that there is a box ticked somewhere or the one that is checked and who should not, but I can't find out where it is or something else to look at. Any ideas would be appreciated.

  I suggest you take a look at:

  http://support.Microsoft.com/kb/318030/

  You can run fixit in the PC that encourage the problem this fixit automatically.