I can't scan to e-mail. http.Hotmail server has not any ideas why?

Similar Questions

• I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

  I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

  original title: can't send or receive emails.

  Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

  Or you might want to try the new port settings.
  http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm

• I can't access my e-mail account (hotmail) like maintaining ping message could not connect.

  : I hope you can help I can't access my e-mail account (hotmail) like maintaining ping message could not connect.

  When I look for details, he said "p/s server has changed.  Input new password.  As I count years I don't remember the password.  It started a month ago and my Tablet and phone keeps ping this message constantly.   How do I 1. Change the server and 2. The password.

  Thanks Maura

  Hi Maura,

  Welcome to the Microsoft community.

  The community of Outlook.com is a good place to find answers to many of your questions how do and get advice from other users and members of the community.  However, questions about your Microsoft account are not best dealt with in a public forum because of the personal information at issue.   Click here to learn more about how to get help with your Microsoft account: where to get additional support for my account and information questions?

  I hope this helps. Let us know if you need more assistance.

• The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller.

  Hi all

  Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...

  Thank you & best regards
  Andy

  Hi Andy,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information.

• Computer has recently been corrected it now say windows is not genuine, go online to solve the problem. Windows validation does not any ideas how I can fix this

  Computer has recently been corrected it now say windows is not genuine, go online to solve the problem.  Windows validation does not any ideas how I can fix this

  Visit: http://www.microsoft.com/genuine/diag/> and click on "start the Diagnostics.

  IMPORTANT -online if you run Windows 7 or Vista 64-bit, you must Access the site via IE 32 bits only!]

  `~`

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx>

  `~`

  If you are still not able to validate your Vista installation, follow these steps:

  I. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062>

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  II. after running the tool, click on the button continue, and then click the copy button (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  III. start a new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  >>

  >

  IV. A help desk specialist will analyze the data and recommend an appropriate solution.

  UTC/GMT is 21:28 Friday, December 2, 2011

• I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  The serial number of the computer has nothing to do with the product key for Windows.

  What happened when you tried to install Xp with sp3? If you do not have the original for the computer that you use to install Windows?

  You can try to contact the manufacturer of the computer who may be able to provide the recovery disc. The disks are usually under $ 20.

• How can I scan to e-mail at work?

  Tech Data:

  OS: Mac Snow Leopard

  Printer: 8600 Pro more

  Connection method: printer - Ethernet (Hello), wireless laptop

  FULL CV software running, including the full updates via Apple Software Update

  Implementation took place without a hitch

  Works in print

  ePrint works

  Scan of the computer works

  Working to archive Fax (sending of faxes received at the email address)

  When I try to set up scanning to E-mail, specifically "outgoing Email profiles" I receive the message "the network connection error. "Check the network and try again..."  It is through the local web interface on the printer.  I tried in Safari and Chrome. It comes as the State in the HP utility displays the printer connected and ready.

  Can someone tell me what to look for to set up Fax to send?  I need to connect wirelessly instead of Ethernet?  Do I have to connect to the computer via USB?

  Thanks for any help or suggestion.

  Hello

  Please click on the web link below and answer simply, it does not

  http://support.HP.com/us-en/document/c02914043

• Can I set up Windows Mail to send messages and not receive?

  sending messages multiple pc while receiving on one PC

  I am trying to set up Windows Mail on Vista machine just to send messages and do not receive because I get all my email on another computer running Windows XP. Is it feasible with the same account name and service provider? How can I make sure that don't get emails on the machine Vista. Windows Mail requires both incoming and outgoing servers?

  When you set up your account send only, you should be able to disable the e-mail is.  Under the general tab of the account properties, you will find a box "Include this account when receiving mail or synchronizing".  Uncheck this option.  You can include any string of fake server, you want the name of the incoming server.  The account will never check incoming mail, but you can use it to send mail.

• a roxio program seems to have frozen my pc can't access windows to uninstall program or Internet Explore. Any ideas?

  Fortunately, I use my VISTA HOME PREMIUM PC when a message appears - something on a runtime with ROXIO error.

  Well, between you, me and the in the system, I don't know what ROXIO is or NOR did I install it.

  Now I can't access windows mail, internet Explorer - NOTHING.

  Tried to get help from windows to remove the program roxio as a first attempt but no access whatsoever.

  SO I'm alone and dead.

  is there anyone out there that can help you with a solution please?

  Hi, Terry,

  Roxio is a software that comes pre-installed on the computer systems of DVD burning

  http://www.Roxio.com/

  Roxio instructions about uninstalling software

  Complete uninstall of Creator 9 & 10 on Windows XP

  http://KB.Roxio.com/Search.aspx?URL=/content/KB/Creator/000086CR¶ms=

  What exactly is the Message you get.  Word for Word, please.

  When you tried to remove Roxio was in the characteristics of uninstall from Control Panel or start > menu all programs?  If you find the software in the all programs list, click the uninstall program.

  Troubleshooting access Email Windows and IE

  Method 1:

  Click Start > default of programs

  Select Set Program Access and Computer Defaults

  Click the down arrow next to the custom

  Select the messaging application (Windows Mail), that you want for the default program

  Click Ok

  Restart your computer and restart e-mail application

  Method 2:

  Go into safe mode and see if you can access the Application of e-mail from there. Sure Modeprevents several software and drivers to start. This can help to solve the problem of system.

  Note: Remove all floppy disks, CDs and DVDs, printer, etc... from your computer before going into safe mode.

  To go in Safe Mode.

  1) click the Start button, then click on restart.

  (2) do one of the following:

  · If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  · If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (3) on the Advanced Boot Options screen, use the arrow keys to select the safe mode with networking option and press ENTER.

  (4) log in your computer with a user account with administrator rights.

  (5) if the problem is not reappear in safe mode, go back to the normal starting upwards and perform the clean boot.

  To leave safe mode, restart your computer and let Windows start normally.

  Steps to put your computer in a clean boot:

  (1) log the computer by using an account with administrator rights.

  2) click Start, typemsconfig.exe in the start search box and press ENTER to startThe System Configuration utility.

  (3) If you are prompted for an administrator password or for confirmation, type your password, or clickcontinue.

  (4) on the general tab, clickSelective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  (5) on the Services tab, click to select thehide all Microsoft services check box, and then all disable.

  6) click OK, and then clickrestart.

  After your system is in a clean boot state, do divide and conquer method to check which particular application is the cause of the crash. In this, you will need to disable half of the services outside of Microsoft services, check if the problem returns and so on. Ditto for the startup items.

  For more information about the clean boot, follow the link below.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved.

  After the clean boot, it is important that your system to normal startup. To do so,

  1) click Start, typemsconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or clickcontinue.

  (2) on the general tab, click theNormal startup option, and then click OK.

  (3) when you are prompted to restart the computer, click Restart.
  

• How can I fix the error of form "the server has encountered an error"?

  I have a Muse contact form widget with a couple of custom fields and check boxes added. When I try to send the form, I get a message "the server has encountered an error.

  I tried to run the form_check.php, and all my ticks are green. I tried to add an email address to send to with the same URL that the site and I have tried including my personal e-mail in the first place is not an e-mail address "bigcompany.com".

  I don't understand why it won't work, because I am currently using another form in a mini site under the same domain with the same email address and it works perfectly! Help please!

  Thanks in advance for your suggestions.

  Simon

  Please try to re - insert training and then check, otherwise you can try to publish the site in British Colombia as a place to test which would help isolate the problem.

  Thank you

  Sanjit

• How can I keep a connectivity when the DNS server is not available?

  We have remote locations with several computers that are joined to our domain via a gateway to gateway VPN. When VPN breaks down, they lose the connection to our CD/DNS server. Their ip addresses remain the same, since they are managed by their local router but they failed to connect to other devices to their location even though the devices have static IP addresses. If I understand the use of the LMhosts file must allow me to allow them to keep local communications between computers. I think the entry in LMHOSTS should be like this for each local machine they need to access.

  10.0.0.1 SampleEntry #PRE
  Is there a better way to solve this problem, however?

  Hi Jim,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with connectivity indomain computers when the DNS server is not available.

  As the computer is connected to the domain network, the question you posted would be better suited in the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Why can my customer receive e-mails from my iPad but not my IMac?

  Hello, I have an iMac OS X Yosemite, Version 10.10.5, 3.5 GHz Intel Core i5, 16 GB 1600 MHz DDR3 and an iPad. Last year, I worked with a client, have no difficulty emailing back. I use Yahoo Mail. Recently, my customer migrated from Lotus notes to Outlook (version 2010) and cannot receive my email from my iMac. Only they can, however, make from my iPad. It's the explanation of their IT Department. "I have recently gone from Lotus to Outlook. When I was on Lotus our security does not come into conflict. When I migrated to Outlook the Outlook security is that collide with your security is why I do not receive emails sent through your computer. Safety on the iPad is different and is compatible with my computer which is why emails sent from your iPad come to me. "We tried to check SPAM, junk mail, basic troubleshooting. I'm not big on technique and I need to be able to send this email to the person of my computer. Help, please!

  Is the address of the customer e-mail different since he switched to Outlook? If so, have you changed his e-mail address in your Contacts? My guess is when you type an email to that customer and you start to overlay in his name in the of: domain, Mail automatically fills to its OLD yahoo.com email address.

  If you have two email addresses on your iMac for this customer - one for his old account from yahoo.com and one to his new Outlook account, delete the OLD e-mail address to your Contacts.

• I can't retrieve my e-mail in hotmail on windows 8 that I stupidly deleted to be great help

  I went to temporary files and it's Hotmail and I can't recover anything like that and all these instructions to go to recover deleted does exist, but then I'm not the brightest on my new computer

  Jessica

  Are you using the built in victory 8 app to get your mail or a browser?

• Using only the address bar can have a drop down of google search results has not been visited webistes

  I would like to see my search results in the address instead of the results bar previously visited (if possible a mixture of both), I just wondered if their was anyway to do it, without using the mini search bar. Thank you!

  I think that for now, you need an add-on to display search suggestions below the address bar you type, if I interpret correctly your question.

  • Here is an example of an add-on that shows search suggestions: https://addons.mozilla.org/firefox/addon/omnibar/
  • You can turn off bookmarks and/or history using the Panel of the Privacy Options dialog box: https://support.mozilla.org/kb/awesome-bar-find-your-bookmarks-history-and-tabs#w_how-can-i-control-what-results-the-location-bar-shows-me

• I upgraded to FF6 today and it changed all my origins of Gmail. There is just a white background. Any ideas why? Can you help me to solve this?

  I think my original comment says it all. I installed upgrading and changed my Gmail.

  You may have used the add-on Firefox "Google redesigned" to change your Gmail background. A new version of the add-on that is compatible with Firefox 6 published yesterday, and you can install it here:

  https://addons.Mozilla.org/en-us/Firefox/addon/Google-redesigned/versions/

  Or if you wait a few days so that it can be reviewed by Mozilla, it will update automatically.