I can't turn on the WiFi, can someone send me firmware module or XPRT wi - fi?

Similar Questions

• I can't turn on the Wifi, Satellite L40 - 18Z

  Hello

  I use Satellite L40 - 18Z but I can not turn on Wifi.

  I am very sure that peripheral lla is installed another property and I tried a few ways to turn on the Wifi device but never turned on. Of course, never caught the signal. Rooter has no problem either.

  Manager says Deveice peripheral island works another property. And the driver is correctly installed. But I can't turn on parameter of network or windows Mobility Center.

  It's very embarrassing to write something like that, but I need your help.

  PS This is the first time that I post on this thread, but who answers? Toshiba support team?

  Thank you

  Hello
  You said, did you check if the device is properly installed in Device Manager. Is there a red X on the wlan module in the list? And he must have this name: RTL8187B.

  There are several ways to enable the wlan on your laptop. One, is the hardware switch of your laptop, the other thing you can try is a combination of FN to FN + F8.
  You can control if the WiFi is working when you see the symbol of the LED is on or not.

  Finally, it is a forum for user to user here.

• Turn off the wifi on my childs phone option?

  I tried all possible ways to restrict the use of the phone of my girls in the school, but it seems that the restrictions that I don't work on wifi. Am I able to disable this option?

  You can turn off the WiFi on the phone, but your daughter can re-enable it if she wishes. A Wi - Fi connection can be restricted at home on your router, but it will help you in school.

• Satellite R840 - 12 c: cannot manually turn off the WiFi function

  I recently bought a brand new Toshiba Satellite R840 - 12 c Notebook.
  The Wifi light is still "on" and the function key does not work, in other words cannot manually turn off the WiFi feature.

  Although the WiFi feature is still "on" I can't connect to wireless modem. "

  When I go to Device Manager I find conflicts in "other devices" for

  1. network controller
  2 PCI Simple Communications Controller
  3 unknown Device

  Tried updating drivers connecting via ethernet cable to the modem, but nothing helped.

  Can anyone help?

  Hello

  Have you installed the driver WLan?
  The laptop seems to be equipped with the Atheros AR9285 WiFi card and in most cases the Fn + F8 key does not work because the Wlan driver is not installed or is not working properly.

  Recommend first of all remove the network card wireless from Device Manager, then restart the laptop. After restarting again install the new driver Atheros Wlan downloaded for this wlan card.

  Here you can find all the drivers Wlan published by Toshiba:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

• ProBook 6455 b: Probook 6455 b accidentally turned off the wifi connection

  I bought a hp probook 6455 b windows 7 yesterday and had everything set up, while he was playing with it, it turned off the wifi and now we can't put it back on, the light is orange and when I press nothing happens, any ideas

  Hello @thebutton

  Thanks for posting on the HP Forums.

  To get your question more exposure I suggest you post in the trade forums since the Probook 6455 b is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  Support of your product page can be useful in the meantime: HP ProBook 6455 Notebook PC b

  I hope this helps!

• X 301 Vista Sp1 64-bit WiFi Driver 5300 AGN: it is not possible to turn on the WiFi radio

  I have a X 301 S/N xx-xxxxx computer laptop installed with Vista Business Professional 64 - bit SP1. A few days ago, I updated the drivers via ThinkVantage "Update my system" tool, including the WiFi pilot. Now I have the Intel(r) WiFi Link 5300 AGN driver 13.2.0.30 version. After installing this driver WiFI Radio does not work: it is not possible to turn on the WiFi radio.

  Program has been installed during this update Intel PROSet/Wireless tools. In the menu to diagnose the hardware test fails for this device, claiming that the wireless adapter is disabled or uninstalled. However, if I look at the control panel-> device-> ECS Manager-> Intel(r) WiFi Link 5300 AGN-> (right click) properties-> tab driver, then I see that the device is turned on.

  I should add that the original driver worked perfectly and now it is very annoying that I can't use WiFi at all. Please, give me help how to solve this problem. I tried to visit the pages of Lenovo Support & downloads and download other X 301 Vista 64-bit driver, but the system tells me that I have the latest version of the driver and the driver has not been installed. Anyway, I don't know what the right solution or the pilot, so please help me. I am very frustrated because I downloaded everthing officially using the given by Lenovo ThinkVantage tool. I thought that these drivers offered by this tool have been tested.

  change note:-removed S/N for the safety of the customer

  
  

• Can someone send the default drive (D: Lenovo) who have the record of the driver? Lenovo y510p

  Can someone send default player (Lenovo D who have the record of the driver?) Lenovo y510p

  I just deleted :')

  Anyone can he share for me?

  I thank...

  You can click the link for support on this page and go to the driver & downloads.

  You will find all the drivers for your laptop, just search with Y510p.

• Can someone send me a link to where I can download the Acrobat 9 PPD of?

  Can someone send me a link to where I can download the Acrobat 9 PPD of?

  As they removed the file from those listed here:

  https://helpx.Adobe.com/x-productkb/multi/save-as-PDF-options-not.html

  Kind regards

  Tom.

  Worked fine for me in Firefox, too, but here is a link to my dropbvox: https://www.hightail.com/download/bXBiaXRBaFJOMUF3anNUQw

• Can't turn on the WiFi on the Tungsten C

  After a struggle with Hotsync under Vista (I still did not resolve yet) my Palm Tungsten C wireless not connect to my network home. I did a hard reset and restore all the data. It seems to work very well. But still no WiFi. I tried to put back the settings network and WiFi, but when I activate WiFi on IT it automatically and immediately turns off. the green light does not illuminate as well.

  Looking at Wi - Fi information screen, it turns out that the addess of the network is zero all: 00:00:00:00:00:00.

  What can I do?

  TX, marc

  It has been reported several times before for more users to BrightHand.com.  It seems to be a failure of the Wifi card.

  Most of them solved the problem by installing a new Wifi card in their units:

  http://Forum.Brighthand.com/showthread.php?t=96641

  WyreNut

  Message relates to: Centro (AT & T)

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• Satellite U920T - need help to turn on the WiFi

  Hello!

  I have a laptop Toshiba Satellite U920T.
  My OS is Windows 8.1 x 64 with all updates.
  There is a challenge with wireless which started after I put in place a flight on charm bar Mode and back fired.

  When I disabled the flight Mode, the switch wireless of charm bar is remained handicapped as shown on the screenshot (sorry, all the screenshots are in Russian, but if something is not clear I'm ready to explain)
  http://bit.LY/12HGayL
  The adapter in Device Manager is Normal
  http://bit.LY/1Gd2ygA
  It is the latest version of the driver installed
  http://bit.LY/1Itn4NO
  The Windows Network Diagnostics Wizard detects that the wireless is turned off.
  http://bit.LY/1w84plz
  When I try to enable wireless using the utility of the farm, he pointed out that I should turn the WiFi hardware button
  http://bit.LY/1ItncNd
  But my laptop is not any material for the WiFi button. Only hokey, but it comes to establish a flight Mode.

  Need your help.

  Sincerely,
  Vadim

  Guess, what, I think that there is a problem between the driver and the system and consequently the system reports that the WiFi network is DISABLED.

  I recommend you to uninstall the Intel Wlan Device Manager driver.
  Then, you must restart the laptop.
  Please perform a complete shutdown (no hybrid closed, standby, etc.)

  After the new reboot, install the Wlan driver and reboot once more.
  It would be really interesting to know if you can activate the WLan after this short driver installation procedure.

• HP pavilion G4. Keyboard stopped working and Wifi off, unable to turn on the WiFi.

  I have a HP pavilion G4, Windows 7. Keyboard stopped working and Wifi off, cannot turn on the wireless device.  I use a keyboard usb type, but has no a wireless on/off button. I tried F12, ctrl + F12 or Alt + F12, etc. without effect. I tried the keyboard of the screen, but it also has wireless on/off button.

  Is there another way to turn on the wireless device?

  Thank you.

  First install the hp connection manager, open it and use the power in front of the wireless button to turn on the wireless connection

  link

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54945.exe

• HP Probook 645 G1: Turn off the wifi when it is connected to the wire

  Hello

  I have a HP 645 Probook G1 A4 - 4300 M / 4 GB / 500 GB SSD/DVDRW/14 "HD/W7P 64B latptop.

  I also have a model Dockingstation REPLACEMENT-I10X.

  I have attached an ethernet cable on the docking station that works. My problem is that when I connect my laptop to the docking station. Get a priority above wired wireless. If the laptop still uses wireless unless I turn it off manually.

  Ofource I want to log out manually. I want the phone choose wired when wired and wireless when wireless.

  I tried a couple things:

  1. I went setings adapter--> advance--> Advance settings--> moved the connection to the lan network to a network connection wireless, top of page bottem. it did not work

  2. I manual put several metrics in connection properties (internet protocol 4 & 6--> Properties--> Advanced--> change automatic metric to manual and filled a small number to wired connection (No. 5) and filled a higher number (No. 250) to the Wi - Fi connection.) it did not work

  3. looked in the bios menu. There is no option to change the priority or something like that.

  Now, I always disconnect the wifi when I'm attached to the docking station (even tried plugging an ethernet straight cable to the laptop, but that has not helped either). Problem is when I unlock the laptop from the docking station, I have to manually reconnect to the wireless network.

  Additional info: since my laptop is always closed when it is locked on the docking station, I cannont press the WIRELESS button to disconnect or connect.

  Any suggestions help would be greatly appreciated.

  Hello:

  See if the BIOS of your laptop computer has a LAN/WLAN, commissioning.

  On my HP Elitebook 6930p it is a parameter to enable the LAN/WLAN switch that automatically turns off the wireless card when an ethernet cable is connected, and vice versa.

• Turn off the Wifi programmatically?

  someone at - he found a way to turn on/off wifi again?

  Laughing out loud
  the CanStartAndStopInterfaces function in https://developer.blackberry.com/cascades/reference/qnetworkconfigurationmanager.html is not defined, so you are not allowed to start or stop interfaces.

  I would like to have a software that enables / disables wifi based on my position, but it is not possible at the moment.

• Can someone send me the VMkbd.sys file?

  Hello everyone,

  I had problems with VMware Player v4 upgrade and only as a last resort, I had to do a manual uninstall to version 3.1.4. Unfortunately for me, I deleted by mistake the VMkbd.sys driver and now my machine works just fine but will not accept any keyboard input. Currently locked by the login screen Windows original (no keyboard, no password) and the local firewall is blocking the RDP, I would try to restore this file before reinstalling Windows.

  Can someone please be so kind and tell me how to get a copy of the file v3.1.4 VMkbd.sys VMware Player for Windows XP 32-bit?

  Thank you all for your help.

  try to extract the vmplayer - setup.exe

  start the installation with the parameter /e tempdir download

  You can find the file in tempdir then