Motherboard\cup

Similar Questions

• Satellite A60 - how to fix a female connector on the motherboard?

  I have a Satellite A60 which is since 2005. About 6 months ago the CPU fan started running all the time and recently, the computer began to fade.

  Thinking that it is ongoing overheating, I decided to completely disassemble the computer, clean it thoroughly, remove the old thermal paste and install one DIMM memory more important.

  Well, everything goes like clockwork, until I tried to put the connector of the power on switch in the plug. It wasn't easy so I put gently a little more pressure on the connector using tweezers. At this time, the socket broke apart from the motherboard.

  I don't have the tools for a welding job, but could a competent technician successfully reattach or is there a new mobo in my future.

  Thanks for the tips!

  Dan

  Hello

  To be honest also don t know how to solve this problem, because I m not a technician for laptop and I believe that you will not find the technicians of laptop here because it s only a user to user forum.

  Regarding this issue, please contact an authorized service provider. Talk to the technicians and buy a cup of coffee. I'm sure they'll help you ;)

  Welcome them

• Satellite M40X-112: malfunction of the keyboard after you emptied a cup of tea

  Good evening to everyone.

  My girlfriend has emptied her cup of tea on his portable Satellite M40x-112.

  Now everything works except the keys R, F, V, Fn.

  Does anyone have experience with such a problem? The laptop is still not out of warranty.
  So, I don't want to open it to clean the keys by behind.

  So any advice or tips or something else (with the exception of the stupid remarks) would be useful.

  Thank you...

  Fischhaendler

  HEY Bela,

  If you're lucky then spilt tea will only have caused a short-circuit in the keyboard itself and won't not flowed through to the motherboard. In this case, it would be possible to clean the keyboard or have it replaced by an authorized Service partner (to maintain the guarantee).

  Unfortunately, you will not be between the ab and do you much because it will be dismantled and that would invalidate the warranty.

  Kind regards

• Satellite L300 - 25G - where can I get a new motherboard and keyboard?

  Hi all

  I have a laptop that has had a good cup of tea (with sugar) overturned on it - the motherboard and keyboard are both dead...

  Where can I get a replacement motherboard if available at all?

  Thanks for any help

  Ben

  Hello

  I'm sorry to hear that, but I think that these things can happen. Nobody's perfect ;)

  Well, you can get a new mother card and keyboard form an authorized service provider. Technicians can also exchange parts and check your laptop (maybe other parts defective too).

  Here, you can search the nearest SPAS:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• helps the Intel DX79SR motherboard

  Hi all - I've been that hover on this forum for years!

  I had a previous id, but I have forgotten/lost that long ago!) a big thank you for all the help during this period.

  I think that I finally asked a question on first 1.5, it's how long its taking me to get this system built :-)

  My tech wants to use the Intel DX79SR motherboard.

  All the research I've done seem to show (maybe I'm just seeing what I want to see...) most of the people with the Asus boards.  Anyone could shed light on the Intel motherboard and its qualities/questions?

  I tried searching these forums for this Board but found nothing... (famous last words)

  Planned rig:

  I7 3930 K (overclocked to a stable level)

  Corsair H80

  Corsair 16 GB of ram 1600 mhz 2 x 8 DIMMs (to increase I get money more!) - I know that there could be questions that staged, but needs, must...

  120 GB Intel SSD 330 series for OS/Apps

  1000 watt power supply

  I ' l using an old initially GTX 295 and probably move to a high-end card in 12 months

  I have 2 old 160 GB 10K Velociraptors (to decide if it should be Raid 0 for the "dailies" or Temp files)

  2 x 2 to Green WD 7200 RPM as backup rushes and other files (I can I paste a swap partition of small windows at the beginning of one of them)

  Working initially with DSLR and 2 k images, but I want to the margin to work with 4 k in 12 to 18 months, so will eventually build a bigger raid for "dailies" configuration.

  Cup in PR CS6 and some small effects work in AE

  Thanks for the help and support you provide for us all

  A

  Download Memtest86 from memtest.org. Which should be good as long as you let down at least a little of all the test cycles.

  RAID 0 or not 7200 or 10,000 RPM will give you the ideal performance for most of the HD codecs with several layers due to the latency of the mechanical controls. You can run the drives as single and still handle most of the good HD codecs.

  Eric

  ADK

• 2013: MacBook Pro replacement motherboard or not

  Brain Trust,

  I need some advice here.

  I have a 2013 fully bridged on (500 GB SSD, 16 GB of RAM) MacBook Pro and the sound from the speakers awefully distorted.

  I did all the regular troubleshooting inclusing a clean installation of the operating system, applications 3rd party and the problem persists.

  The distortion is NOT dependent on volume, it is still there, as if the sound is cut at all levels.

  Now, the headset on the port is perfectly clean, so I think I have it narrowed down to the (material) built-in drivers for speakers. I went to the Genius bar and they agreed and recommend a motherboard replacement. Since I have a month left my Applecare, I could do it, but I hesitate. Professionally, I rely heavily on my machine on a daily basis, and I fear that a machine otherwise perfect with zero problems (other than the problem of speaker) will be messed up.

  What is your experience with a motherboard swap and what do you recommend I do? Live with the distortion and contemplate a great Macbook, or opt for repair until the warranty runs out. NB, I have a very old Macbook that I can use for the week or I'll have to miss my machine.

  I'll answer my own question:

  Do it! I had a fantastic experience! Not only was my main problem, distortion in speakers, correctly diagnosed and resolved, since engineering also saw a small white spot on my screen (who had been there forever), I also had a nine screen. Not only that, I got a new valve and bottom plate, so after 3 years of intensive use, my Macbook Pro looks like new again. Total costs under Apple care program: $0.

  It's really the only problem with Aplle MacBooks: my excuse to buy a new went through the window, this machine will last me a few years ago!

• Mac Book Air, failure of the motherboard

  Hi, I bought Mac Book Pro, a year and months back, yesterday, battery is down to 5%, so I continued to support, as I am studying end nyt I closed my MBA. Next day morning day when I tried to show him a folder with question mark symbol flashing. then I tried top in SafeMode it dint'showed hard drive. While I've taken at the authorized Service Center then they said his mother board failure and asked me to pay 42000INR. Is it really motherboard problem? What are the other options of best for me? and this is the price charged for the motherboard, even as they say? can I have any apple legal right againt for replacement?

  You can test it by connecting via USB, a boot disk.  If the Mac recognizes, the Mac, boots, then the internal drive or connection that is the problem.  Is it is not recognized, then it may very well be a logic card problem.

  Ciao.

• Press the locking Cup call

  I use iphone 6 - IOS 9.3.4. When I press the button to lock the call entering Cup instead just of inhibition vibration and ring tone. Is it possible to change this setting, the lock button?

  As you can see on this page, your iPhone works exactly as designed and published.

  Yes, by pressing the "Lock" button (also called sleep/wake) ends a call.

  http://help.Apple.com/iPhone/9/#/iph3c9951d7

• PowerMac G3 minitour - identify a 333 MHz motherboard

  When I bought my first PowerMac G3 Beige minitour, I didn't know that, for what I was going to use it, I needed the version of 333 MHz, and one I bought turns out to be a unit of 266 MHz. Subsequently, I found a machine at 333 MHz and it's all configured and up and running. Now I want to transform my machine 266 a 333 to have as a backup.

  So, what I am wanting to know is this...  If I replace the motherboard on a 333 266 a, that is all that is necessary to make a machine 333?

  In addition, the part Apple no on my 333 motherboard is 820-0991-B. This means that if I find a motherboard with Apple no. 820 - 0991 - B, it will be a motherboard 333 MHz or there something else involved in the equation?

  If no, is there any there any identification #s on the processor itself I need to know, from (IIRC) it connects?

  Thanks for any help,

  Tom

  The A, B, and C after the logic card number denote a logical Board review, not a processor speed. You want a Rev b or C - Rev A is supported only as a single unit by ATA cable so that B and C models support two - nice addin fo additional drives.

  Otherwise, the card G3 Beige of logic in the framework should be fairly generic. The G3 processor is nested, so it is easy to change the processor. One of my Beige G3s (both are rev C) began as a 300 mHz machine and I upgraded the processor at 500 mHz. You can just install a faster processor into the processor socket for a faster Mac - no swaps logic card are required.

  Other factors are controlled by a single processor jumper block. See this diagram:

  

  Is Apple is easy with a single base card which can be equipped with different CPU speeds using these riders. The setting for the jumper blocks are here:

  https://Web.archive.org/Web/20000505093026/http :// www.bekkoame.or.jp/ ~t-imai/g3a e1.html

  More overclocking here:

  http://lowendmac.com/1997/overclocking-beige-Power-Mac-G3/

  People get into trouble, try to change the bus speed 67 mhz by default and the PCI bus to something higher, especially of you had a sort of installed PCI card. However, you can leave these single speeds and still make some minor adjustments to only the CPU clocking riders.

  Apple had factory no block CAP that set all the parameters for a model at the same time. Overclockers remove the CAP from the factory a piece and use of small riders similar to those used on ATA drives (2mm I remember well), or simply to jump the connectors exposed in the block from the factory with a little short of gold thread.

  It's been long since I was inside my two beasts of Beige, but if you have any other questions, I can possibly to jog my geriatric memory of these things.

• motherboard not worknig

  iPhone 6 does not, perhaps due to motherboard problem. What will be the next step?

  Make an appointment at the Genius Bar at your local Apple store. Unless, of course, you have already disassembled the phone. So, you're pretty much on your own.

• Motherboard dead how do my old favorites in my new motherboard? I hid it.

  Motherboard died enough said. I have an external hard drive with the old Firefox in it. Firefox search for Firefox.

  You may need to display the hidden files and folders in Windows 7, via Control Panel > folder-> Display Options

• MacBook Pro 2011 w/new motherboard

  In December 2014, I replaced the motherboard in my 15 "MacBook Pro (early 2011). I use Yosemite 10.10.5 and Safari has become practically unusable. My main software is the word: Mac 2011. Put it all together, I'm really bad at ease on the upgrade to El Capitan. Could someone give me some information?

  Please run a report of etrecheck and post the results here for more analys

  http://etrecheck.com

• Replaced the motherboard and the HARD disk and now you try to transfer the old TB on the new, but cannot locate the files on the HARD old disk which is now the drive 'E '.

  My computer has stopped working completely and I was going to upgrade in any case, I advanced the work.
  Having replaced everything (motherboard, HARD drive) and everything worked as it should I turned my attention to my emails.
  I tried the Transfer Wizard Windows 7, no joy. Tried to find the profile files, no joy. Just can't find anything about it either remote seems to be linked to tuberculosis.
  HELP Please
  Thank you

  Profile of Thunderbird folders are hidden files, so first make hidden files visible.
  http://KB.mozillazine.org/Show_hidden_files_and_folders

  The location of the profile: http://kb.mozillazine.org/Profile_folder_-_Thunderbird
  Even if your files are now in drive E, not C.

  Info on moving to a new pc: http://kb.mozillazine.org/Move_to_a_new_PC

  If you have downloaded Thunderbird to new pc and run it for the first time, it will create a profile, but do not create the exisitng e-mail accounts. Then you copy the contents of the old drive hard e: drive - profile folder (not the folder real profile, that all the files in the profile folder) and paste them into the profile folder overwrite the default files.

• No automatic updates with the new motherboard. The adjusted settings as advised by your article, restarted the computer - nothing. Downloaded new copy, same problem.

  I get a notification that there is a new update for Firefox and click on it, but the computer is unable to connect to the server and download (if not internet connection works perfectly). I downloaded a new copy and the problem was not solved. I went to your site and set the parameters as indicated by your article, restarted the computer and it is still impossible to have an automatic update as before. (Before the change of the motherboard on the computer of authorized service everything worked fine).

  Try to remove FF from your pc and then it re-download the new version.

• Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

  Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
  Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
  Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

  Problem began late November when Miniclip.com forced updated flash player to version above
  -C' was when they started to play a video advertising in the game box before you could start.

  Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

  In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
  Their House of Windows XP has same Flash Player in Firefox and it works fine.

  Downloaded two screenshots on Media Gallery.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages