I could change the HDD in my laptop HP ENVY TS 15 E3S19UA #ABA

Hi all

I want to change my HARD drive

1 could select 7200 RPM, SATA III HARD disk? Because the original HARD drive is only 5400 RPM SATA II.

1.1 How do I clone the original HARD drive new HARD drive?

2. could I add an mSATA SSD over 120 GB?

3. If I want to boot from mSATA, what should I do?

Thank you very much.

TonyZhang wrote:

Hi all

I want to change my HARD drive

1 could select 7200 RPM, SATA III HARD disk? Because the original HARD drive is only 5400 RPM SATA II.

1.1 How do I clone the original HARD drive new HARD drive?

2. could I add an mSATA SSD over 120 GB?

3. If I want to boot from mSATA, what should I do?

Thank you very much.

Hi again,

The only difference between a 7200 RPM and a disk 5400 RPM is the number of turns. We hear two support SATA II and III, but the 7200 RPM is faster. The best way to clone the disks is to get a usb to SATA adapter or a SATA docking station and use the DD command or other software to clone the drive.

http://Uranus.chrysocome.NET/Linux/rawwrite/

Yes, you can use a larger mSATA SSD 120 GB and I suggest a Samsung EVO. The reason is that Samsung provides a migration utility to migrate in the original hard drive to mSATA SSD which is a difficult task because solid discs are mostly much smaller than HDDs. There is also another problem and that is that Windows 8 is very difficult to install as a new system for the system must be cloned from the HDD to the SSD.

If you manage to migrate the original hard drive to the mSATA, you connect the original hard drive (any drive you want as the storage) via the usb port (use an adapter or a station again) and install a third-party hard disk bootloader because the BIOS won't let you boot from the mSATA. Then put the hard drive in the laptop and boot up. Finally configure the boot loader to boot from the mSATA.

This app will allow you to install the bootloader called Plop: http://www.pendriveapps.com/bootice-partition-flash-drive-edit-boot-sector/

http://www.PLoP.at/en/bootmanager/thebootmanager.html#B4

Tags: Notebooks

Similar Questions

  • Computer laptop need to change the HDD in the SDS?

    Have 3 questions related to the Toshiba SSD!
    1. what laptop need to change the HDD in the SDS?
    ATA, http://www.toshiba.com/taec/adinfo/ssdfacts/ so 1.8 and 2.5, I look at who is the same dimenssions and right?

    2. I have this model Toshiba R200-S2031, is it possible to change drive HARD 80-SSD 256 1.8 inches? I understand that my model has 1.8 IDE I can't take 2.5? But replace IDE ATA is possible that they are the same size?

    3. If I R500 with 64 SSD drive, can I replace it it with greater SDS and the same size of thumb? Let's say I have 2.5 64 GB SSD ich so I could replace it with 500 GB SSD?

    tnaks for answers.
    and Toshiba - thanks to make small laptops, really enjoy.
    you want to update faster, but I LIKE THEM!
    Thanks Toshiba!

    Husbands

    (1) as a general rule, all laptops can be upgraded to an SSD. If the connector on the SSD is the same as the original hard drive connector, it should work.

    (2) I believe there are 1.8 "PATA SSD available, google is your friend.

    (3) I think the R500 is using a connector ZIFF customized for the SSD drive, then you will not be able to install a standard SATA or PATA 2.5 "SSD Drive. I don't know if you can buy SSDS with the connector ZIFF, once again, google can help you.

  • Can not change the brightness on my laptop Vista

    Using the Control Panel, power or FN + F7 or F8 options, I can't adjust the brightness on my laptop.

    I used to be able to use these options and could change the brightness, but now all of a sudden, I can't. I tried to update the driver for my monitor, but it says that it is up-to-date.

    Using the Control Panel, power or FN + F7 or F8 options, I can't adjust the brightness on my laptop.

    I used to be able to use these options and could change the brightness, but now all of a sudden, I can't. I tried to update the driver for my monitor, but it says that it is up-to-date.

    How about you...
    FN + arrow to brighter,
    FN + arrow to darker bottom? For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • I change the window of my laptop HP 635 to Windows 7 ultimate and can not find drivers drivers

    I change the window of my laptop HP 635 for window 7 ultimate and impossible to find some drivers. The drivers are listed below with their hardware ID

    Ethernet Controller
    PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C & REV_05
    PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200
    Network controller
    PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
    PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
    PCI\VEN_168C & DEV_002B & CC_028000
    PCI\VEN_168C & DEV_002B & CC_0280
    PCI device
    PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C & REV_01
    PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C
    PCI\VEN_10EC & DEV_5209 & CC_FF0000
    PCI\VEN_10EC & DEV_5209 & CC_FF00

    Hello:

    You will need:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&mode=2&taskId=135&swItem=ob-93650-1

    This:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&taskId=135&swItem=ob-108903-1&mode=3

    And this:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&mode=2&taskId=135&swItem=ob-93202-1

    Paul

  • On the outlook calendar, I could change the "reminder" what time it is, is it possible to do this with the W8 calendar?

    On the outlook calendar, I could change the "reminder" what time it is, is it possible to do this with the W8 calendar? Let's say, for example, I want a reminder of 40 minutes or 1 hour and 45 minutes. W8 calendar does not appear to have this as an option.

    Hello

    Here are some steps that you can follow:

    a. open the calendar app.

    b. right-click on the screen of the calendar app.

    c. Select the new option (with sign +) from the lower right corner.

    d. under How long option, select custom , and then select your choice.

    Note: Also check the option to display more choices.

    e. save the settings by clicking the Save option in the upper right.

    See also:

    Application of calendar for Windows: FAQ

    http://Windows.Microsoft.com/en-us/Windows-8/calendar-FAQ

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

  • I can't change the character on my laptop! I tried, but the new character only stays on while I'm online. He is not being recorded, or something. What is going on?

    About a month or two before, I had a nasty piece of malware called SystemCheck on this laptop, but I think that I managed to get rid of it. God knows that I have scanned the laptop, a million times more and he has developed own (using Spybot Malwarebytes).
    Before this malware, I had no problem, the character to change and be able to follow a new. Now, I can't. Is this SystemCheck still haunt me?
    Here are the specifications of my laptop:
    XP - SP3; Compaq Evo N610c; 1.00 GB of RAM
    I can't find any troubleshooting guide for this question.

    Hi DawnStorm,

    You should read the article How to fix preferences that will not save. It could be that the Firefox is just not possible to write to the file.

    Hope this helps!

  • I have bad performance in the games, can I change the video in my laptop?

    Hello.. I have asus X54H notebook pc (2 GB RAM-320GBHDD, mother-INTEL dual core Model-k54L card processor)... WINDOWS 7 ULTIMATE 32 BIT, I identify for intel hd grtly install windows 7 on it... I get a updated windows intel HD Graphics... but it is not good... It uses the cpu memory while playing games or any other work & games does not not smoothly.my question for you is I can update my Intel HD Graphics NVIDIA graphics card... because when I click on software update driver in Device Manager, it shows 2 chart standard vga compatible hardwares & intel HD Graphics When I uncheck, there is the list of manufactured products & I selects nvidia... It shows nvidia geforce6100(Microsoft Corporation WDDM) & MANY more versions of nvidia... When I select it. Start Windows, installation of software & when I restart my computer, it doesn't have to update... It showing yellow mark on it... so please tell me how can I update. I go to the website of nvidia also, but he could not scan my system... it says an error has occurred... Help, please... (Sorry for my bad English)... Thanks in advance.

    You have a portable computer, get you the drivers from the manufacturers mobile site and no windows update or Nvidia and if you had read the page nvidia drivers you needed to know this.

    You can't put to day/change graphics on a laptop, graphics performance are what you get and not editable

    http://support.ASUS.com/download.aspx?SLanguage=en&m=X54H&p=3&OS

    If you have a desktop computer, you can change the graphics card.

  • Satellite Pro T130 - 14L: 100% CPU use of acpi.sys after changing the HDD to SSD

    Hello

    because I changed my for one SSD HARD drive and reinstalled Windows 7 with 64 bit on this subject, my system works frequently in 100% CPU utilization caused by kernel module acpi.sys, I discovered with process Explorer and confirmed by recording an ETL file.

    This problem occurs once an hour on average, sometimes after 10 minutes of functioning of the system and sometimes after two hours, no matter which programs are running and whether or not I is actively using the computer. When I noticed a hanging and see this 100% cpu core in the process Explorer window are currently in use, I always need to save my work (which may take a few minutes) and restart the computer.

    I could live with that, but it's pretty nasty. My bios is up to date (version 2.70), as well as my other drivers (no error and no virus found). In other forums I've read, these problems could be avoided by changing the energy registers something Windows settings as never go to sleep of the SSD, but it works in my case as I disabled all energy saving options in Windows and I still have this problem.

    Is there maybe an update of the unofficial bios that could solve this problem?
    I read in another forum, that an unofficial bios update Dell fixed a similar problem on a Dell computer.

    Can someone help me solve this problem please?

    Details of process Explorer:
    The wire with TID 160 and the start address:

    ACPI. SYS + 0X1AF7C

    suddenly starts using 100% CPU and does not stop until you restart.
    Similar problem as in this forum for a Dell PC:
    https://social.technet.Microsoft.com...UM=w7itproperf

    Unlike the Dell problem, there is no appropriate-updated bios for me, could you help me if you could tell me how to stop the kernel module (if it starts hanging or even before). Then I could at least avoid frequent restarts.

  • How to change the HDD in Tecra R10 - 10W - any instructions?

    I would like to install windows 7 on my laptop R10 - 10W, but for now only for test.
    I would like to save my current installation of Windows XP on my HARD drive.

    The simplest solution is to change HARD drive but this laptop has no available HARD disk. :-(

    I tried to boot from the HARD drive connected via esata, but it is not functional. :-(

    Anyone have an idea?

    Thanks Karel

    > More simple solution is to change the HARD drive, but this laptop has no available HARD disk
    What do you mean by inaccessible HARD drive?

    If you want to install the Windows 7 only for the test then you don t have need to change the HARD disk or delete the Win XP from the HARD drive.

    One solution might be to an installation of Win 7 on the second partition.
    Create a partition on the HARD drive using a 3rd party like Partition Magic 8 tool. This great tool and allows you to create and manage the partition.

    Another option would be the use of virtualization.
    You know the Virtual PC?
    http://www.Microsoft.com/Windows/Virtual-PC/

    It helps you to install each operating system that you want on the HARD disk without having all partitions.

  • Is there could change the FSB to Qosmio F20-149?

    Is it possible to change the FSB to the qosmio F20-149?

    Or can I disclose me the PLL of the FSB?

    Thank you very much...

    Boton / terrasight.net

    Hello

    I put t think that it of possible to change (to increase) the FSB on a laptop.
    Nowhere it s not advised to change something on the CPU because of the overheating of the issue and use of OS unstable.

    I found an interesting site on the FSB.
    http://www.CPUFSB.de/FAQ.htm

    Concerning

  • Pavilion g6: change the processor in my laptop

    hp1840 map of mother (U3E1) I'll have my laptop with processor i3-2370, is it possible to change the processor that will be compatible on the motherboard? Please help me if and its a 2 GB graphic card radeon thus again slowing down work.

    Manufacturer Hewlett-Packard
    Model 1840 (U3E1)
    56.2 C version
    Intel chipset provider
    Sandy Bridge chipset model
    Chipset revision 09
    Southbridge Intel supplier
    Southbridge model HM76
    Southbridge revision 04
    56 ° C, temperature of the system
    BIOS
    Brand Insyde
    Version F.14
    Day 20/09/2012
    ICP data
    PCI slot
    Type of PCI slot
    Use of the available slot
    Data channels x 16
    Slot designation PCI Express Slot 1
    SMEs, hot-plug features
    Slot number 0
    PCI slot
    Type of PCI slot
    Use of the available slot
    Data channels x 1
    Slot designation PCI Express Slot 2
    Features 5V, 3.3V, SME
    Slot number 1

    The manual seems to tell us that you can install an i7-3632QM, which is a great leap from what you have. So and if I'm trying to get a second opinion from @erico so I do not send you to a dead end. But I'm sure you can.

  • I need to change the motherboard in my laptop. How to reactivate XP and Office?

    I need to change the motherboard on a Dell laptop because of the infamous video problem Nvidia. The laptop has XP Professional, Office 2003, and all my other programs on it. After I have change the motherboard, I guess I'll have to reactivate XP and Office. How do I do that? Thank you.

    Hi J_C_H,


     

    Method 1: follow the steps described in the article below to activate Windows XP

    How to activate Windows XP
    http://support.Microsoft.com/kb/307890


     

    Method 2: Follow the steps described in the article below to activate Office

    Activate Office
    http://Office.Microsoft.com/en-us/Visio-Help/activate-or-register-programs-in-the-Microsoft-Office-system-HA001118776.aspx

    Method 3: You can contact a Microsoft Product Activation Center

    How to find a phone number for a Microsoft Product Activation Center
    http://support.Microsoft.com/kb/950929/en-us

  • How to change the property on my laptop

    I gave my old mother to 86 this computer so she could say our family history and memoir.  We put the ship owner under his name but she gave him right then, how do I change the ownership to myself?

    Click Start, type: CMD
    Right-click on CMD
    Click on run as administrator

    Extend down to the following:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\

    Select CurrentVersion

    Double-click the RegisteredOrganization key

    Enter the name of the appropriate agency

    Click OK

    Double-click the RegisteredOwner key

    Enter the name of the appropriate owner

    Click OK

    Close the registry

  • How can I change the direction of my laptop for landscape screen

    I wiping me the keyboard and accidentally changed the screen on my ASUS laptop in portrait mode.  What combination of keys I press?

    On Saturday, March 10, 2012 02:53:30 + 0000, Doug Binns wrote:

    I wiping me the keyboard and accidentally changed the screen on my ASUS laptop in portrait mode.  What combination of keys I press?

    The ability to rotate the screen image is a characteristic of your video
    card, to help work with instructors who turn to the portrait
    orientation. Almost certainly you accidentally pressed Ctrl-Alt, and
    an arrow key.
    Rotate using these keys.

    Ken Blake, Microsoft MVP

  • change the brightness on my laptop

    Hello
    I have Hp compaq 6735 s, 5 years now! I took it for repair, because he was too slow! they update my laptop computer, erase all the data and then my laptop was fine! But when I tried to change the brightness with the keyboard, it does not work. I went to customize settings, I tried there, but still does not work... I don't know what to do, and my eyes can't stand the current brightness because is too low! Please help me solve my problem!
    Thank you.

    What is the operating system installed?

    For most operating systems, installation HP Quick Launch buttons software will return the feature for special function keys on your portable computer. You should be able to increase and decrease brightness after the installation of this software.

Maybe you are looking for

  • OfficeJet 6500 Wireless: not readable display

    My display screen has vertical lines and display them the words are more readable. Slowly, they started to disappear last year. I did a soft and hard (unplug the printer, hold down the 3 and #, plug printer in). Print the alignment page. All ink cart

  • Failed to load the chipset driver. NLite or Floppy work.

    Hi people, I use a HP XW8400 (CPU Intel Xeon 5150 chipst 5000 X). I tried all means to get Windows XP PRO to detect my SATA HDD internal storage - and none of them have worked. Loading the drivers using the F6 floppy method key kept leading the messa

  • USING A PFD OPTIONS PRINTERS

    How do you use the PDF personally which is supplied with a HP9050dn printer?

  • BlackBerry Smartphones Im new on this issue as well as the blackberry

    I have a blackberry 8300 I change ringtones for my contacts but I can't the grille or the when I get a message to change the beeps or to get a new ringtone for only a phone call. Thank you

  • Captivate 7 file will not open in Captivate 9

    I'm trying to open a course which has been developed in Captivate 7. I have 9 Captivate. I get a status bar that Captivate is "open project...". Loading project", but it stops at 80% load and will not open the file. The file is 69.4 MB.I tried to ope