I could use Portege A600 as a mobile phone?

Similar Questions

• How can I use my iphone without a mobile phone service provider?

  I have an iphone 4S that I would like to use with my games and apps on wifi, but don't need a phone number, e-mail or facetime. If I do not need a mobile phone service provider. How do I set it up to just use WiFi?

  You must have a SIM card installed. It doesn't have to be linked to an active line of service, but it must be present, and if the phone is locked, it must be the correct carrier.

• Switching of data (contacts,...) between mobile phone and smartphone Acer Liquid E600

  Hello world

  I own a E600 liquid Acer (my first smartphone) and I would like to transfer my data (contacts,...) of my mobile phone (Sony Ericsson T715) on my smartphone. I would use my PC because my mobile phone is no longer in good working condition. Transfer data from my SIM card (in mobile) and then put the SIM in Acer, presents a risk a lot because the mobile could fall. Can I do not to transfer the data to the micro SD card in my laptop and read it with the card on my desktop reader? What is coordinate and what software (Acer) do I need to run it.

  Thanks in advance for your support

  If your T715 is able to save contacts as .vcf (Vcard) on the microSD, then you can put the microSD on the E600 and charge these to the list of contacts .vcf.

  http://en.Wikipedia.org/wiki/vCard

  You can also try to pair 2 phones via Bluetooth and transfer contacts via bluetooth. can be a simple or a nightmare... depends on matching the success and the bluetooth protocols.

• Portege A600 - 15G - incorrect APN is set when using 3 G modem

  I encountered a problem with my Portege A600 - 15G:
  It has a 3G modem integrated with an installed sim card.

  When I use the MTS (Russia, 250 01 code network) mobile operator, it uses wrong APN: mts.internet.ru instead of internet.mts.ru.

  When I change it manually in the options for Wireless Manager, it works correctly until the laptop restarts.
  After the reboot it again uses incorrect APN.

  I scanned the registry, but did not find "mts.internet.ru". Possibly the Wireless Manager stores NPP in a dll.

  Maybe someone had a similar problem? How can I solve this problem?

  WBR, Alex.

  Hi Alex

  Find the ConnectionProfiles.csv file. I'm sure you know what you need to change. :) Reset.
  You are using vista or xp?

  /Nifer

• Portege A600: 3 G radio off and can depend on the use of Win 7 64 bit

  I have a Portege A600 with 3G (Ericsson F3507g).

  The Wireless Manager says the radio is off and I should activate it via the hardware switch.
  The switch is turned on, but only effects the Wifi and Bluetooth. FN + F8 does nothing.

  All the drivers are installed and I also installed RF 3 G utility.
  There is nothing in the BIOS referring to WWAN. I have Windows 7 64 bit installed.

  I saw a suggestion to install the value Pack, but the two zip files will not extract because they suggest that they are part of a multi zip pack.

  > I saw a suggestion to install the value Pack, but the two zip files will not extract because they suggest that they are part of a multi zip pack.

  [Value added Package | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 10 & ID = 73571 & OSI D = 30 & driverLanguage = 42] must be installed to use the function keys and activated the WiFi / 3G.

  After downloading, you can decompress the package. Then, you will find a file .exe inside the new folder.
  This exe file is also a zipped package. You can extract this right click on the exe file and choosing extract here. Then you will find the setup.exe file, which should launch the installation

  But before doing the [pilot 3 G | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42] and [3 G RF Power Control Utility | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries =] [243 & selProduct = 821 & selSho rtMod = 797 & language = 13 & selOS = all & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42] must be installed.

• Portege A600-128 - no card detected WiFi and no sound through headphones

  Hello
  I recently encounter some problem with my portege a600-128. Not illustrated, wireless network adapters a so no wifi detection, more when using headphones, realtek HD audio software detects them being plugged, but no sound is not output - I was wondering if it is a problem with the software, or perhaps of a damage...

  Re: wifi, I tried to download the driver realtek_wlan_20100225.zip on the site, but nothing has changed. In fact, the single adapter in Device Manager is the adapter broadband toshiba f3507g mobile, and in network connections, I don't see this one. Try to "find the hardware changes" in Device Manager only managed the laptop to realize that my Alps pointing device (touchpad) is not installed (if she always worked and always made)-trying to install tpdrv-20081103180427. ZIP has not changed anything...

  Thanks for any help!

  Hey Buddy,

  Have you checked if the WiFi is enabled by using the FN + F8 key combination? If your laptop is a hardware WLAN switch, it must be defined on IT!
  In addition I recommend you load the default settings in the BIOS.

  On your sound problem, have you tried to update the audio driver?

• Portege A600 Webcam software crashes when changing the settings with the sound muted

  I have a problem with XP Toshiba factory build for Portege A600 and Portege R600.
  If you try to change the sound properties of the Webcam using the Camera Assistant Software with the sound muted, the camera wizard app will hang & Windows fails to shut down or even stop. The only way to stop is pressed the power button until the machine stops.

  So far, the only solution I can come to is to increase the volume to zero rather than using the mute box. The problem is if you forget and mute rather than turning down and then try to change the sound properties, its "game over." In addition, it is not really satisfactory because politics is to keep the machines muted until the sound is required.

  This does not happen with the Vista Build, build it only XP.

  My guess is that this will not happen on any machine using the Chicony Webcam & software with the Realtek HD audio but I have not tried on machines enough yet to be sure. So far, I've recreated on two A600s and a R600. The machines are not defective and you can create the problem, "straight out of the box. Just do the following:
  (1) use the provided Toshiba product recovery DVD for restore factory Toshiba Windows XP SP2 version
  (2) once you have done the whole stuff, mute
  (3) open the Camera Assistant Software application & to select Properties
  4) click the audio settings tab

  That of all, suspended. The Camera Assistant Software version is 1.7.209.0807L which seems to be the last being available for download on the websites of Toshiba.

  Someone has encountered this or have any suggestions?

  Hello

  I n t have a Portege but U400 with pre-installed and integrated webcam Win XP.
  I installed a clean Win XP and then upgraded the XP to the last State and installed all the drivers available from the Toshiba page and possible.

  I followed the steps in your message and I have to say that I didn t notice strange questions, software webcam still works correctly

  I put t know what could be the problem, but I recommend that you check the audio driver to update maybe you can use the Realtek page
  Also, check if the BIOS has been updated to the current state and if your Windows XP is up to date.

• 3G problem on Portege A600 - off Radio

  Hello

  I have a Portege A600-13Y with Windows 7 32 bit. I installed the latest drivers for 3G and utilities of this thread.
  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=178251𫡋]

  My SIM card O2 is detected by the Toshiba Wireless Manager but there is a message

  "* Radio is disabled - to activate the mobile switch on."

  (German: "Funk ausgeschaltet ist.) (" <> Zum Einschalten Notebook-switch briefly").

  So the problem is, I have found no switch for WWAN.

  Anyone have the same problem or can anyone please help me with this problem.

  Make sure that the WLAN switch is turned on and the orange light is on also.
  After that, use FN + F8 key combination to turn it on.

  Whose options you can see with FN + F8?

• Portege A600-13D - webcam stopped working

  Hello

  I have a Netbook Toshiba Portege A600-13D old, I am very satisfied with it, but lately the WEBCAM does not work and I have no idea what to do. If I try to activate the camera, I have the answer:

  The WEB camera could not been initialized

  Systemcontrol is the message:

  The camera could not been started, Code 10

  If I look at the driver and try to update, the message is:

  The optimal driver is already installed

  Maybe someone has an idea of what I can do and how to proceed. Sorry my bad English!

  Thanks in advance and best regards
  gh_1929

  Hello

  Error code 10 means that the device could not start.
  This may be related to driver problem (software), but also hardware problem.

  Let's see if its a software issue: check that I recommend you to uninstall the software for a Chicony webcam first.
  As far as I know, you should be able to uninstall the software in the control panel? programs & features.
  In the case of the Chicony webcam software is not listed here, go to Device Manager and uninstall the webcam driver which you should find in imaging devices.

  After the system restart, go to the page of the Toshiba UE driver and download Chicony webcam software to perform the new installation.
  You will probably need to restart the laptop once more to make it work properly.

  So lets hope that this accelerated procedure would solve your problem of course that if the problem is related to the problem of software.

• CTRL keys do not work on Portege A600

  Both CTRL keys do not work in my Portege A600, I'm updating from vista to win 7 and I can´t use of keys CTRL times.

  in this thread talks about it, but have no solution

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40628

  I contact toshiba support but have no information on what it.

  What can I do?

  Diego

  Hello

  I think that your keyboard is faulty.
  Connect an external USB keyboard and check if both CTRL would work.
  If both work correctly using the external keyboard, then your internal keyboard should be replaced to solve this problem.

• My Portege A600 stops down

  I have a portege A600 remaining loop when I ask a Shut Down.

  I tried to restore to a previous point, but since the computer does not restart, the operation was interrupted.

  What can I do?

  Hello

  Have you tried to use the System Restore tool when Windows starts normally?

  What you can try is to use the tool in safe mode system restore or start the laptop and use F8 > tp repair my computer option and go ahead until what you enter in the system recovery options. Try please to use restore of the system from there.

  It work?

• Button Portege A600 - 133 Windows 7 64 bit problem

  After installing windows 7 64 bit on Portege A600-133, Toshiba or Toshiba Assist button a presenter button work. All other keys are working properly. How can I solve this problem?

  Hello

  Have you installed the latest VAP (value added package)?
  Toshiba page provides the last Win 7 VAP for A600 which is v1.2.40

  You use the latest version of the BIOS?
  Check it!

• Portege A600-12O - impossible to reinstall Windows XP

  When reinstalling windows XP on Portege A600-12O, I get following error:
  Integrated HARD disk errors: the product recovery CD can not reinstall the operating system.

  As well, I try to install XP SP2 using Microsoft cd (.. .needless talk without success)...
  following error is flashed on the screen:
  A problem has been detected and windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Hello

  In my opinion, the Toshiba Recovery disk error message is very interesting and says a lot. What do you think about this?

  If your HARD drive is defective, you need a new and you are not able to reinstall the OS. Maybe your HARD drive needs to be exchanged.

  In your case I would contact an authorized service provider. Technicians can check your laptop and if it of under warranty, you should get a new HARD drive for free.

  Welcome them

• Re: Portege A600-13Y: update BIOS 1.50 to 2.00 - WIN - how it is risky?

  Hello

  My BIOS Portege A600-13Y is version 1.50:

  -should I upgrade to 2.00WIN?
  -J' found this source for the biso 2.0 upgrade but there is no indication that the file is authentic bios TOSHIBA.
  No checksum, any ssl certificate, nothing. Is it possible to get it securely / authenticated?

  Thanks for the responses,
  Schneiderlein

  Hello

  First, you must use and download the BIOS files only from site Web from Toshiba.
  PPA61E Portege A600-13Y is a European model for Toshiba laptop and all the drivers and BIOS can be found on the Toshiba driver page.

  I put t know why you ask control totals or certificate ssl of the Web from Toshiba sites are safe
  but everyone who needs drivers or BIOS can download

  You must only make sure that you have chosen the right laptop model and you have downloaded the good BIOS!

  But why you want to update the BIOS?
  If your laptop is running without problem, then, an update of the BIOS is not important, that I'm still this notice; never change a running system.

• Portege A600 PPA60A - unable to download Windows 7 drivers

  I have an old PC of 3 months I'm trying to get upgraded to Windows 7. It's a Portege A600 PPA60A 01H00G

  I tried to use killed HIM and it fails at the step where it downloads drivers

  I then tried to manually download the drivers from this page:
  http://support.Toshiba-tie.co.jp/Windows7/download/PORTEGE_A600_32_au.htm
  But none of the th elinks on this page to work. I guess that's also why KILLED it fails during download too.

  Note that I'm in Australia, but for some reason any support Australian forum redirects here.

  Thank you

  Hi simon13,.

  Well, I tried to download drivers on the Web site that you posted but I can't notice t a problem. All three drivers tried to downloaded are worked correctly.

  Maybe it was a temporary problem and Toshiba did solve this problem. I think you should try it again. :)