I do a repair system EACH time disc that I perform an Image backup system?

Similar Questions

• For the last few weeks, after that I closed 19.0 FF, I can't open it. I resorted to having to re - install FF each time so that it can open. What should do?

  For the last few weeks, whenever I close Firefox 18 (and more recently 19.0), I can't reopen the browser again. The application runs as if it is going to open, then stops and sits there. I had to resort to the re - install the browser every time now, very irritating. He remembers my tabs as they had been, that I want to. I used to open up to 40-50 tabs, but now made an effort to keep them below 20, thinking that it would help work more optimally. I'm tired of re - install the browser all the time. What should I do? Thank you

  When this happens, check the Windows Task Manager to see if there is a hidden window or the firefox.exe process is at a standstill?

  To open the Windows Task Manager, press Ctrl + Shift + Esc

  On the Applications tab, look for any window with the icon of Firefox. See something wrong here? In another thread, users have reported finding what seems to be a rogue process. If you find something, try to select and killing using end task.

  Under the processes tab, look for firefox.exe. According to the displayed columns, you can often see that the program is reading, writing, communicate or simply sitting there, doing nothing. If you have allowed time to stop Firefox and it crashes, you can select firefox.exe and click on end process.

  After that, Firefox expected to start normally.

  Please see this article for troubleshooting suggestions for when Firefox crashes out. https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding#w_firefox-hangs-when-you-quit-it

  A little luck?

• System Image backup has failed during the backup

  I have a 2 years old HP pavilion g series notebook.  I did a backup system image on dvd + r discs. It was almost over, when the drive #99, I got this message "the backup failed. The system cannot find the specified path (0 x 80070003)
  My computer is no longer under warranty and I'm $ 60 in the disks if they can't be used.  I need to know there is a way to save what I saved and restart the backup of the Image where it left off?
  
  Product: A6Z59UA #ABA
  Model: g61d60us

  Hi CherylLyme,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you did an image backup, and while he was almost done you received the error (0 x 80070003).  Here is a link to a response from Microsoft to help you. Windows backup error 0 x 80070003 (One answer per Vinod N)

  I'm not sure if you would be able to leave and get back on disc 99, because once you have repaired, it will be changed from when you first ran the backup.  The disc that you used only were not read, accessible writing, so you wouldn't be able to reuse them.  You can see that an external hard drive would be a more economical way to make your backups. The data must be in one place and easier to store.  If you decide to use a USB key, so do not more then the 32 GB and won't Windows 8 on it.

  You can probably buy an external drive for on the cost of the replacement of disks.  Here is a link to the HP Shopping external storage , but you can buy one at several places, Office Depot, Staples, Wal-Mart and computer shops are few.  I hope this helps.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• Lost/Missing/Deleted - file "c:\Windows\repair\system.

  Laptop: gateway MX3225 / XP Home Edition / 1 GB Ram / fully updated to SP3 / M 1.5 G CPU

  Had a virus and removed TI rebooted for system, black screen of death, managed to install Recovery Console, use step 1 by recovering a corrupted registry, ended up with missing or corrupt 'system32\config\system file', and looked in the repair directory there is no file in my "c:\windows\repair" folder that says 'system '. I have no way to use a cd drive or a USB on the laptop. Do I have to redo a file 'repair\system' from scratch, or is it on the hard drive in another directory? I read each article of Microsoft on the corrupted file / lack of issue, but there is no explanation for the repair file to miss.

  Again miss me the real "system" file in the directory "c:\windows\repair".

  I would write my own file system for this last reference if I do another repair of system like this, it would save a lot of my time.

  Any help will be appreciated

  Hey

  You should see if you never save your date, u did I guess.

  In any case, type the following lines of information in the order for Recovery Console screen and press (Enter) after each line:

  MD tmp

  1-copy c:\windows\system32\config\system c:\windows\tmp\system.bak

  2-delete c:\windows\system32\config\system

  3 - copy c:\windows\repair\system c:\windows\system32\config\system

  Let me know how it when.

  Life is easy, live and die what else?.

• Does not work Vista startup repair cannot repair, System Restore cannot repair.

  I have a Dell Inspiron with Windows Vista. On commissioning, it is said: "Windows could not start. A recent hardware or software change might be the cause. "then offer to 'Launch Startup Repair' or 'start Windows normally '.

  When asked to boot normally, it tries to start, but broken, return back to this page.
  When he was asked to run the Startup Repair, it opens the program scans the system for several minutes and then says "Startup Repair cannot repair this computer automatically.

  When we click on diagnostics and repair details, it is said:

  "Last startup successfully: 03/10/2011 15:42:52.
  Number of repair attempts: 8

  Details of the session
  Drive system = \Device\Harddisk
  Windows directory = C:\Windows
  AutoChk run = 0
  Number of root causes = 1

  The test is performed:
  Name: Search for updates
  Result: Completed successfully. Error code = 0 x 0
  Name: Drive for System Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Troubleshooting disk
  Result: Completed successfully. Error code = 0 x 0
  Name: Metadata for the drive Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0

  Root cause found:
  Startup Repair tried several times but still not determine the cause of the problem. »

  If not, we can look at the advanced settings:
  System Restore = "no restore point created the disk of your computer system. To create a restore point open System Protection.
  Windows complete PC Restore = "a valid backup location is not found. Windows cannot find a backup on this computer. »
  = Windows Memory Diagnostic tool does not solve anything when parsing
  Command prompt
  Reference Dell Factory Image Restore = not tried but am avoiding wiping all your own hard drive for as long as possible...

  He's not in Mode safe, and I don't know what is happening. It happened when I shut it down (holding the power button down) update that it had frozen.
  What should I do? Thank you.

  Hello

  Method 1: I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  a. Insert the installation disc.

  b. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  c. If prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  d. choose your language settings, and then click Next.

  e. click on repair your computer.

  f. Select the operating system you want to repair, and then click Next.

  g. in the System Recovery Options menu, click Startup Repair.

  See: How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  Method 2: If above method fails, then run the command chkdsk WinRE (Windows Recovery Environment) and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: Select command prompt from the system recovery options and follow the mentioned below as follows:

  Type the following command and press ENTER.

  Chkdsk /r

  Note: Chkdsk /r command erases / corrupted hard disk data corrections. Some of your personal files/data may be erased.

• used sytem repair from the installation disc difficult or too complicated?

  do you know if the repair system hard to use from reinstalling vista irunning disk?  without any reason after windows drivres dell download does not start, it is just there to take all this time and if I'm lucky it will start, I used the configuration of the system, and that did not help. I know, it seems that he is sssoooo nearly all set to start at the same time, but in the system and the process where it lists everything that I don't know what is what, so I can't stop the useless stuff to start, I thing I have too many things that either doesn't work - I don't have not even half uninstalled or put in the easy computer were and if it's the dell drivers , screwing, then why vista does not work?

  Dell has a touch screen F12 on boot options, but vista says to put in disk, press on restart and then repair, but what happens if I can't do it at the start or the dvd - rom does not start when I reboot?

  and if it doesn't it's really complicated? I ran disk cleanup and repair. I ran to check memory, I had 140 GB free out of 240 GB, I ran two restorations system back to dates before I installed the drivers from dell, everything worked fine until last night, now dell takes to always to get to the windows startup takes part and windows to start even in safe mode.

  I ran all the controls sytem dell pc and everything passes .so should I put the disc and hit restart? and should I first go to where he gives the choice to load some stuff or normally loads at startup, and which one should I use all or just selective to go until I reboot. Thanks for any help you can offer, because it runs now I don't even want to turn it off.

  Which

  Hello

  You receive an error message?
  
  Method 1:
  You must restart your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows installation disc, you can follow the procedure:

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart.

  d. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  e. Select your language settings and then click Next.

  f. click on repair your computer.

  g. Select the operating system you want to repair, and then click Next.

  h. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 2:
  You can see startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3:
  You can check the event viewer for related event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  You can also see the links provided to learn more:
  http://support.Microsoft.com/mats/slow_windows_performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Recently, my laptop screen is too short and needs to adjust each time that I have turn it on, or change the site. Help, please?

  Screen on laptop needs the length by adjusting each time I have activate or change the site.  Can't see what the cause.

  Hi Maureen,

  Thank you for keeping us posted.

  I appreciate all your efforts really to try to solve this problem.

  To diagnose the issue in the new user account, I suggest you try to re-create the issue in the new user account and check if that helps.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  Security, privacy & accounts

  http://Windows.Microsoft.com/en-us/Windows/Security-Privacy-accounts-help#security-privacy-accounts-help=Windows-7&V0H=win8tab1&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  You can also try running SFC scan and check if this is useful.

                                   

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how run the tool (SFC.exe) System File Checkerto scan your system for files and to repair the system missing or corrupt files in Windows. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Compilation of sources each time.

  Hello to my friends in Java.
  
  Something sweet problem started happening recently, and I ask so few tracks that would lead me to a repair. When I ask my IDE to run one of my programs, I get the following result:

  init:
  Deleting: /home/owen/NetBeansProjects/CliqueSpace/trunk/AgentDevice/build/built-jar.properties
  deps-jar:
  Updating property file: /home/owen/NetBeansProjects/CliqueSpace/trunk/AgentDevice/build/built-jar.properties
  ClientDeviceMedia.init:
  ClientDeviceMedia.deps-jar:
  Updating property file: /home/owen/NetBeansProjects/CliqueSpace/trunk/AgentDevice/build/built-jar.properties
  CliqueSpace.init:
  CliqueSpace.deps-jar:
  Updating property file: /home/owen/NetBeansProjects/CliqueSpace/trunk/AgentDevice/build/built-jar.properties
  Exception.init:
  Exception.deps-jar:
  Updating property file: /home/owen/NetBeansProjects/CliqueSpace/trunk/AgentDevice/build/built-jar.properties
  Exception.compile:
  Exception.jar:
  CliqueSpace.compile:
  CliqueSpace.jar:
  Compiling 90 source files to /home/owen/NetBeansProjects/CliqueSpace/trunk/ClientDeviceMedia/build/classes
  ClientDeviceMedia.compile:
  Building jar: /home/owen/NetBeansProjects/CliqueSpace/trunk/ClientDeviceMedia/dist/ClientDeviceMedia.jar
  ClientDeviceMedia.jar:
  compile:
  run:

  I wonder why these files 90 source are compiled each time I want to start my program regardless of whether they have been affected, given that the last execution program. I guess it's an ant script, and it checks an addiction that I accidentally deleted or modified. I don't know too much about Ant (know how works of the Ant is not a priority), so a few pointers on the way to the 'Ant dependency mechanism' works in this case, so I can stop these 90 records compiled each time the program is run would be appreciated.
  
  Thank you
  
  Owen.

  Hello Owen,.
  There is a flag of Ant -v or -verbose , which will display detailed information, including the detailed resolution of dependencies rules, such as:

  [javac] Test.java omitted as D:\classes\Test.class is up to date.
  [javac] Unset.java added as D:\classes\Unset.class is outdated.
  [javac] Compiling 1 source file to D:\classes
  

  (from manual, Ant http://ant.apache.org/problems.html)

  But if you are working with a version control system, suits you, you should compare the current version, build files Ant with the most recent version not whenever recompile (since the problem only"recently").

  Kind regards

  J.

  Published by: jduprez on May 18, 2012 07:51

• Satellite P10 - repair on the recovery disc option

  My Satellite P10 crashed, which suggests an error of hard disk may be imminent, I have a recovery disk, but it doesn't have a repair option, only a full recovery. As I would like to try to retrieve some data, is there a repair option, normally associated with these discs.
  If yes where can I get one?

  Thank you

  Recovery disc has no repair option. Recovery disk contains only the recovery image. Try to get the facilities of Microsoft CD and use the fix here. If you will not be able to repair the operating system pre-installed as a last option, you can use the recovery disk and install recovery image.

  Bye and good luck!

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• KB2633880, KB2518864 and KB2572073 keep trying to reload each time.

  Slight problem,

  KB2633880, KB2518864 and KB2572073 keep trying to reload each time.

  I have same manaully loaded them from the Windows Update page and even if it says updated successfully, the auto update tries to add.  I have entered the area to add and remove programs and looked for them in the updates, to see if their removal would be useful, but they aren't there.

  Bright ideas?

  Jon.

  Hmm, that's interesting. Put in operation the computer this morning and he stopped to offer them. They are not yet in the system, so I don't really understand, but at least I don't have the problem more.

  (And the bees went too).

• my computer shutdown itself each time I use netflix for a few minutes

  my computer shutdown itself each time I use netflix for a few minutes. I don't know what the cause, but it's okay

  Hey, Zain.

  Of course, everything is not fine - as a result, the problem.  ;)
  My first thought would be overheating.  Clean dust from the computer lately (if ever)?

  Spent, I suggest you have a look through the system logs (right click on computer > manage; go to computer Management\System Tools\Event Vieewer) and find the event entry that indicates why the computer turns off.  You'll find it at ~ downtime (can be registered just before closing, can be generated on the reboot log entries.)  You devriez find the offending entry in Windows logs\System.
  Whatever it is, search through newspapers preceded entires, a yellow or red !

  HTH,
  Chris

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.