I do not explicitly media recovery, but it "still works.

Similar Questions

• If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with el

  If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with the elements and may itself make the compression... I know it can burn DVDs...

  vidog

  If you burn to a DVD disc in first items 10 and later versions, some choices are

  a. DVD-VIDEO standard screen or 4:3 16:9 on DVD disc

  Both will have the frame size of 720 x 480 pixels. But the big screen comes with a 16:9 flag that extends approximately 856/480 16:9 display video after encoding. The screening is not adjustable by the user... and you end up with the DVD-VIDEO format @ 29.97 images per second interlaced.

  b. format of the AVCHD on DVD

  Here is the video display 1920 x 1080. And, depending on the version, can be 29.97 images interlaced per second, or 23.976 progressive frames per second (if not just 29.97 images per second interlaced). Although you can generate some AVCHD DVD with a regular DVD burner, DVD AVCHD is in need of a blu - ray player that supports supported AVCHD DVD or one of these drives multimedia multi which is also.

  c. If the player allows... you can export your Timeline file saved on a USB Flash drive and then insert this USB Flash drive in the drive to get the reading of the file. On this route, you can set the Premiere Elements avancΘs to customize your choice of export preset.

  Please consult the bulletin and consider then, let us know if we have targeted your question. If this isn't the case, please give more details in the areas where we do not have.

  Thank you.

  RTA

• Suddenly does not have e-mail but can still send

  I use windows mail in Vista.  Suddenly, from one day to the other I couldn't receive emails but can still send them.  Help broadband BT says that my email accounts are ok.  There is no error message.  Can always go to yahoo mail and get back them.  Does not all parameters. Someone at - it suggestions?

  Try to compact and repair the database (see www.oehelp.com/WMUtil/).  If this does not help you can try to delete the email account (messages will not be affected), then close WinMail and compact and repair the database again and open WinMail and add your account back once again.

  Steve

• L50 - A - 160:USB of power in standby mode satellite is disabled but it STILL works

  Hi all!

  It's my L50-A-160.

  USB power standby is disabled in the BIOS but it always on!
  Nothing helps.
  As I can not turn off wakes on keyboard events. BIOS 1.30.

  Thanks for the advice in advance.

  Hello

  You are talking about sleep function & expenses supported by some USB ports?

  Be aware that not all media ports USB Sleep & Charge and only marked with a small sign flash USB ports would give such function.
  As far as I know on Satellite L50-A-160 only USB 3.0 (on the right side) would support this sleep & Charge USB.

  The charge & sleep can be enabled and disabled in windows.
  Go to desktop-> Office Assistance (in the task bar)-> utility tools & -> Control Panel

  There you should find the different tabs and one of the tabs should have sleep & fresh / tab sleep & music which allows you to set advanced features for the mod, Hibernate standby mode and stop mode.
  Simply move the slider to activate or deactivate the function sleep & Charge.

  But the sleep & fees may not work with certain external devices even if they are compatible with the USB specification. In this case, turn off the power of the computer on the charging device.

  You should also be known that when sleep & cool man of wake-up function is activated USB does not work for the compatible ports.

  In addition, there is an option called function in battery Mode. This option can be used to toggle the sleep & Charge in battery mode. It also displays the remaining capacity of the battery.
  Simply move the cursor to enable or disable this feature.

  By the way: read the user 95 manual page. It would be useful for you.

• Recovery disks will still work if I wipe the HARD drive?

  Hey everybody! I have a quick question and I hope one of you can tell me if I'm about to make a huge mistake.

  My HP Pavillion Dv6 had serious problems and chkdsk deleted a lot of clues. I worked on the problem of HARD drive and looks is not default (no bad sectors, only of weakness). I read that zero-filling can help with HARD drive problems.

  My only question is that I don't know if I'll be able to just reinstall after I have zeros, because the building programs will be wiped. I have an application and Driver Recovery CD and a DVD of system recovery that I have used before. These will still work if I have zero filling? Or I need something else?

  Thank you very much for your help!

  Sadie

  Hi Sadie,

  Yes, your recovery disks will work if set you to zero the whole HARD drive (they would also work on a new HARD drive if you need to replace the existing one).

  When reloading the operating system, you choose the "Factory Reset" option will reinstall the OS and recreate all the original scores.

  Kind regards

  DP - K

• OfficeJet Pro 8610 does not print the files, but other things work

  Hello

  I want to install a whole new 8610 to our computer with WIndows 8.1 HP's OfficeJet Pro and I use a USB cable.

  I installed everything correctly according to the setting (green controls along the + "full installation") and the printer is set as default (also with the green check mark).

  There is communication between the two because I can print test pages (head alignment, etc.) for HP printer app and I can also scan a doc to the PC successfully.

  Despite the light the printer in the print menu, when you try to print, I can't any print file from PC to the printer, an email or a Word doc.

  And what baffles me, is that I can see the printed file go into the queue for a bit of treatment, then it disappears as if it's done, but it is not an activity of the printer.

  I completely uninstalled and reinstalled nothing doesn't.

  This should take 10 minutes to Setup, and I just don't understand.

  Thanks for your help.

  Hi Ringo1115.

  You might try the recommendation at the following link.   If this does not resolve your problem, you might want to try the tool print and scan diagnostic.

  If one of them resolve your problem, please write it down as resolved.  In this way, others may benefit from your experience.

  I hope this helps you...

• We think our computer to upgrade from Vista to Windows 8, but not sure if photoshop CS2 will still work? also how do I save it in a change because they say that I need to do a full clean instalation and I will lose all programs!

  Not sure how this forum works? Did anyone see my question?

  If you are in urgent need of help CS2 so my suggestion would be to avoid the upgrade to Windows 8 If you ran it on a Vista machine already.  It is likely to complicate things and you may end up with a system that is incapable of managing these old software.

  You should see also the following about CS2 - basically, regardless of the copy you have is not a useful for a new installation.

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• I dropped my iphone 4s in the water, but it still works?

  I actually dropped my phone in the water before, but it worked fine afterwards, despite the fact that I have did nothing. I went in the bathroom again today and it seemed to work very well and I don't think anything of it. All sounds have worked, the screen and the brightness seemed fine, and all the buttons work. My wifi worked not briefly, but the wifi in my house is a little wobbly and I turned it works and it was fine. I used it for more than two hours later and it was fine, until I noticed water under the screen. I immediately looked up what I must do, turned my phone off, took out the sim card and began painstakingly dry with a hair dryer (I don't have any rice or silica gel), paying special attention to the battery, but also an opening in the phone. The hair dryer was weak, I kept it at a distance, and I followed it constantly for that phone don't fire no. I skipped, it regularly for about 20-30 minutes, turned to the monitor, and the brand of water has been growing (its in the half top of the screen) and it seems to have disappeared, but I wonder if the water could simply scattered. I have it turn on and off several times and it always seems fine.

  I need to know if you think that the phone will survive. Also, I can't afford a new phone or to get it fixed now, so if you have advice that can be performed by an amateur at home, then I'd love to hear them. Thank you.

  I think that your phone will probably survive if you used a hair dryer on low, do at least 1 iCloud backup every week, but if you get a new phone, I'm sorry.

• Deleted podcast in iTunes Store but power still works?

  For some reason any my podcast has been removed from iTunes, and while current subscribers may always listen to new episodes on iTunes, it is not possible to find the podcast in iTunes store and subscribe to it. The store link: https://itunes.apple.com/dk/podcast/bulibold.dk-bulipod/id954016630

  In Podcastconnect State of podcast has been "Deleted." Why is this? Of course, I try to add the stream again. However, when doing so I get this error: "unable to read from the stream.

  I checked on the Feedvalidator, Podba.se and castfeedvalidator.com and all saying that my feed is valid. See for yourself: http://bulibold.dk/feed/podcast/

  Then; went to my podcast on the iTunes Store for new subscribers can't find it. Current subscribers always get the stream in their iTunes app and the feed is working and valid. What should do?

  This seems to be a problem with your server. I can subscribe to this feed in iTunes and see in Firefox (my default RSS reader), but using "curl" in the Terminal to access brings the "HTTP 403-forbidden" error message.

  The most common reason for this is when you try to access the directory where there is an index.html file in it - if there was this file automatically appear, but you are not normally allowed access to a list of directories. Since you do not have a file name, but you do not have an index.html file when even (since it's a food that we try to access) I can only conclude that the server is to distinguish between requests FRO browsers or the iTunes application, he allows and asks at the Terminal or the iTunes Store, which it is not. Of course it was originally the case, or you have your podcast in the store in the first place. Of course, all this is conjecture, because I can tell you only what I saw; you will need to ask the people running your server.

• I can no longer connect to the internet Explorer, Firefox and Safari, but Opera still works.

  I tried to reinstall Explorer also, but no progress... not even in Explorer network diagnostics works. Any ideas?

  Norwegian diagnosis:

  Previous diagnostiserende kjoretid: 09/03/11 23:59:33

  Diagnose for nettverkskort

  Gjenkjenning av nettverksplassering Info Bruker Internett-tilkobling privat Identifikasjon for nettverkskort Info Nettverkstilkobling: Navn = Lokal tilkobling, Enhet = Broadcom NetLink (TM) Gigabit Ethernet, Medietype = LAN Delmedietype = LAN Info Nettverkstilkobling: Navn = itself nettverkstilkobling, Enhet = Broadcom 802.11 g Nettverkskort, LAN, Delmedietype = Medietype = ITSELF Info Nettverkstilkobling: Navn = tilkobling Lokal 4, Enhet = Sesam eCard, Medietype = LAN, Delmedietype = LAN Info Nettverkstilkobling: Navn is 1394-tilkobling, Enhet nettverkskort 1394, LAN, Delmedietype = Medietype = is 1394 Info Nettverkstilkobling: Navn Internett-tilkobling =, = Internett-tilkobling Enhet, Medietype is GREEN for DELT TILGANG on LAN, Delmedietype = INGEN warn Denne maskinen har sea enn ett Ethernet-kort eller sea enn ett kort tradlost Info Bruker Omdirigerer til kundestottetelefon

  Diagnose for HTTP, HTTPS, FTP

  HTTPS HTTP-, FTP-tilkobling Info FTP (passive): Koblet til FTP.Microsoft.com. Info HTTPS: Koblet til www.microsoft.com. warn HTTP: Feil 12029 under tilkobling til www.microsoft.com: a connection with the server could not be established warn HTTP: Feil 12029 under tilkobling til www.hotmail.com: a connection with the server could not be established error Kan ikke opprette en HTTP-tilkobling.

  Hi J-F-K,.

  · The computer is connected to a domain?

  · Is there a service pack installed on the computer?

  · What is the type of internet connection you use?

  · Do you remember all the recent changes on the computer before the show?

  Please try the steps listed in the link below: how to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

  With regard to:

  Samhrutha G S - Microsoft technical support.

• my laptop had the error 03F0 twice but it still works after a reboot?

  OK, this happened twice and I'm starting to be scared. My laptop is a HP Pavilion dv6 equipped from Vista 32 bit about 2 years now. I had my laptop on the way 'sleep' and came back an hour later and it's on. When I opened it the screen was black and it is tellling me he couldn't find the hard drive. I turned it off and let it sit for a few minutes and he turned his back. He came and asked if I wanted to start normally or in safe mode so I chose normal. The computer started normally and I had no problem until today. I left there and came back about 40 minutes later and he said something, of not being able to find a boot file? I forgot to write exactly what he says. When I restarted this time I looked in the error logs and he had both two errors 03F0 dated yesterday when he came up the first time. Until now, today he was works well, but I'm a little worried because I have class work tomorrow and I would of course lose him. I keep my laptop on a cooling pad but it's still hot so I don't know if that has anything to do with it.

  Any help would be greatly appreciated!

  Hi Cyd Pryor,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest you to make sure that all device drivers are updated:

  Updated a hardware driver that is not working properly

  Also, take a look at the following reference article link:

  How to fix error BlueScreen (STOP) that cause Windows Vista to shut down or restart unexpectedly (Title of ignore it)

  I hope this helps.

• Start/task bar freezes, but can still work on all open windows? : S

  Hello and thank you if you took the time to read this.

  I'm on Vista x 64

  I'll start by when I turn on my pc.  (and an example of what is happening)

  Turn on > enter password > windows start > if I leave my computer for a few moments without start all programs, the start bar will freeze after about 5 minutes.

  I am then unable to open all programs, if I try Ctrl + Alt + Delete I try to start the Task Manager, but it's too frozen and I can't terminate any process.

  The only thing I can do is Ctrl + Alt + Del again and shut down my computer.

  (is where it gets more weird)

  If I start my pc > fill in password > open some programs quickly before the start bar freezes (because he ends up by themselves) then the start bar freezes after a short period (1 min) (for example) Firefox/Chrome open, Photoshop, E-mail, etc. open, I am able to use all these programs, unless I have close or minimize the window for them , making it impossible to get again (even if they are still running as a process)

  If I try to Alt + Tab the real Vista Alt + animation tab that opens in the middle of the screen sits there frozen too impossible to close or change the program.

  To add to the strangeness >

  I then press Ctrl + Alt + Delete and click CLOSE in the lower right, when I do this the ' the following documents are still open you want to save before windows shuts etc etc etc...'   So I click Cancel instead of "Force Shut down" and everything will come back to working perfectly!

  I'm confused and have no idea of what I should...

  I'm guessing a repair would be useful, but there may be something im missing

  Thank you for reading if you have any help much appreciated!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Software BlackBerry BB link do not backup via cable, wifi sync still works

  Hello a few months ago, I noticed my classic used BB connect via cable to the BB link. Yes, I tried other ports and other cables. Yes, he stays cool and yes I see classic windows Explorer if really the cable and port are working well.

  But the cable is required for backup of BB. Shame, I'm so hot on any other data PC returns with several internal & external readers.

  I don't remember if it was after a device OS updated. as I only need to back up once a month or more.

  I read the forum seen reloading BBLInk. did not work. I went to re - download link, but I see that my version is 1.2.3.56 and download day is 1.2.0.52 which seems backwards.

  All thoughts, I will try this version first?

  (why we are forced to update BB OS with bl * daily messages dy practically forcing us to be updated)

  with the general 7/10 s/o updates cause more problems than they solve - if it ain't broke, don't fix it.

  SOLUTION - BOOM. (Problem when connected via the LINK says BB cable still disconnected)

  I tried to install on a different pc with nothing doesn't so I thought to be a thing of the phone.

  parameters--> storage and access--> access USB--> EXTINCTION mass storage mode

  (I thought by activating this option it permits mass storage at the same time as connected back to the top because my Bold9900 did not allow this simulateously).

  PLUGGED in DEVICE NEW [even if when I installed the last link it also installed mix & drivers] WHEN I PLUGGED in, the UNIT has GIVES ME OPTION INSTALL the DRIVERS. MASS STORAGE; SD ACCESS; IGNORE.

  Select the DRIVER INTALL

  Drivers have been installed from the device to the PC, a new icon in the systray, click on the drivers have been installed, but first item says "DEVICE DISCONNECTED", so when pilots I finished DEVICE UNPLUGGED AND re PLUGGED & BBLINK BOOM now says device has been plugged in.

  resolved, return to fact & done.

• Huh? Move-VM generates Error Messages, but it still works!

  Has anyone seen this?

  > move-vm devdocs - data store TCStore

  Move-vm: 22/07/2013-11:23:37 operation Move-VM is not valid due to the current state of the object.

  On line: 1 char: 2

  + move-vm devdocs - data store TCStore

  +  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [Move-VM], VimException)

  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVM

  Here's my version:
  

  
  

  > Get-PowerCLIVersion

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.1 Release 2 build 1012425

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.1 build 768137

  VMWare ImageBuilder PowerCLI component 5.1 build 768137

  VMware vCloud Director PowerCLI component 5.1 build 1012427

  License of VMware PowerCLI component 5.1 build 669840

  VDS's VMware PowerCLI component 5.1 build 1012428

  VMware vSphere PowerCLI component 5.1 build 1012428

  I've seen this before, but not sure if yours is the same.

  The virtual machine is turned on? No, the power off.

  Unsubscribe and then register the virtual computer.

  Then try the svMotion.

• All of a sudden, the .mts files and some mp4s will not load project on one computer (still works great on the second computer)

  Worked on a project all week, no problem.  Had to restart the computer, project manager, now all files .mts say 'type of compression not supported', and some fine previously mp4s (made in After Effects) to display only green.  But it's not all mp4s, only some of them.  Through all the forums.  Do you have all the deactivation, reactivation, uninstalling, re-installing, etc..  The same problem.  Responsible for the project even upward on a laptop and it works fine.

  Nothing new has been installed.  Nothing has changed on the computer.  I rebooted, it so I could move to another office.  It worked very well at 09:55 this morning, and when I tried to reload the project after the restart at 10:20, it no longer works.

  Fortunately, my laptop slow can at least load and export the final of this project.  But I need my rear main system.

  Thanks in advance.

  Installs all the files in a NEW folder (not only renamed the current folder), can of the moment, and now they all work again!