T330 incompatibility of Windows Server 2008 R2 SP1 install USB 3.0

Similar Questions

• Impossible to install KB2790655 - Windows Server 2008 R2 SP1

  Hi all

  Having the "all TCP/IP ports are a matter of TIME_WAIT state" on Windows Server 2008 R2 SP1 which has been fixed in hotfix KB2553549. After searching for updates replaced for KB2553549, I found KB2790655. When I try to install it, I get the error "this update is not applicable to your computer".

  I am currently,
  N ' is not connected to the internet

  -With the help of x 64 versions of windows updates (64 bit OS)

  -Using the Intel Xeon processor

  What I tried,
  Installation/update of system tool bar. He has successfully installed and running but no dice with KB2790655.

  -Verified in triplicate that the update is already installed on my computer.

  My current issues at the present time are,
  -A security update KB2790655 replaced? I was unable to find anything after about 30 minutes of research.

  -Are there any required pre-reqs for this 2008 R2 SP1 security update? I don't see any other than the Windows RT pre - req.

  -Could you my TCP/IP TIME_WAIT problem cause problems with windows update?

  -My next step connects to the internet to try to download the update directly?

  Links,

  https://support.Microsoft.com/en-us/KB/2553549

  https://TechNet.Microsoft.com/library/security/MS12-032

  https://TechNet.Microsoft.com/library/security/MS12-032

  Thank you!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2008 R2 SP1 AHCI RAID change

  Hello

  OS: Windows Server 2008 R2 SP1
  Storage: 1 x SSD
  Tip: Supermicro X9SRW-f

  Currently, the SATA in the BIOS option is on AHCI. Start Windows on the desktop without problem.

  Objective: Convert AHCI Raid mode. The integrated chipset to create a matrix to mirror with 2 x SSD.

  I downloaded the disk driver for this card and installed the Intel Rapid Storage driver/software. I reboot and switch the SATA Raid mode. Windows starts to load and immediately blue screens. Put the SATA to AHCI mode allows me to boot successfully.

  There are a few other drivers from the disc. Install these drivers, the windows are no longer boot in AHCI or Raid mode.
  iaStorA.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver
  iaStorB.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver

  HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\ (set to 0 Start)
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV (set to 0 Start)

  How can I activate the raid option and get Windows to start without error? Registry hack? Other drivers?

  * Note the OS has been cloned for the SSD. I don't have the option for the new Windows installation.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I downloaded the Windows Server 2008 R2 SP1 180 trial version. How can I get the key?

  Hi, I want to install the Windows Server 2008 R2 SP1 180 trial version. I downloaded from:
  http://TechNet.Microsoft.com/en-us/evalcenter/ee175713.aspx

  but I don't have the key. How to register and get the key.

  Another question:
  Is it possible to install Windows Server 2008 R2 SP1 180 trial version as a virtual server on my Windows 7 Home premium version? If Yes, how can I do it, because it seems Windows 7 Home premium version do not support Windows Server 2008 R2 with SP1 as machine visualization.

  Thank you.

  Assessment of any version of the software Windows Server 2008 R2 SP1 does not require entering a product key.  Thus, no product key is issued.

  Q. "is it possible to install the Windows Server 2008 R2 with SP1 180 day trial version as a virtual server on my Windows 7 Home premium version?

  A. no, it is not supported.

• Range of printers PhotoSmart c4780 HP; Windows Server 2008 R2 SP1

  Everyone found a way to install this printer on a running Windows Server 2008 R2 SP1 print server, or a work-around pilot?

  Hi JamesRMarvin,

  Follow the instructions below to install the driver for 990c for printing on the server.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your printer Photosmar C4780 using this driver. I would like to know if you have the same problem?

• Installation of Windows Server 2008 R2 SP1 problems

  Since the recent release of Windows Server 2008 R2 SP1, I have since downloaded the ISO from Microsoft (SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO) and tried to install it on my sandbox (ESXi 4.1.0 260247) and I will have questions.

  The problem is that Windows does not have a driver for the SCSI controller device.  I tried to change the type of "LSI Logic SAS' to 'LSI Logic" parallel "and it does not solve the problem.  I tried to download a Windows 2008 LSI SAS of LSI driver directly (http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html) and use it, and still have had no luck.

  I was wondering if anyone has had any success in installing Windows 2008 R2 SP1 on ESX or ESXi 4.0 or 4.1?

  

  See you soon,.

  Ken

  Hi Ken

  It is the same as the previous one:

  SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO

  concerning

  Pieter

• vCenter Server 4.1 U1 Installation on Windows Server 2008 R2 SP1 x 64 does not work

  My vCenter Server Installation in my test environment failed with the following error:

  

  I couldn't find any article yet. Windows Server 2008 R2 x 64 SP1 is supported as a virtual machine but not not to host the virtual Center Server?

  Help, please...

  Hello.

  Is this server Windows 2008 R2 SP1 a controller domain or already running ADAM?  This may be the cause of this message.

  Good luck!

• I have a set of software for Windows Server 2008 with SP1 32-bit?

  My office is running: Windows Server 2008 with Service Pack 1 32-bit.

  AMD Athlon II 640 (Quad Core) 3.2 Ghz

  Installed memory: 3 GB RAM DDR2

  1 Gb integrated graphics.

  NOW!.

  My motherboard: DKA 790GX Platinum. Micro Star International.

  My hardware and everything would be compatible for the server operating system?

  audio device: installed

  Install: network (LAN) Interface Card,.

  Wireless NOTHING: installed.

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.

  
  Thank you & good luck.

• Windows Server 2008 R2 SP1 restart at a specific time

  Failure of the operating system (control bug of Windows, STOP: 0x000000D1 (0xFFFFFA810F546DF0, 0xFFFFF88003F030C0, 0 x 0000000000000002, 0 x 0000000000000000))

  Failure of the operating system (control bug of Windows, STOP: 0x000000D1 (0xFFFFFA810F480298, 0xFFFFF88003EE30C0, 0 x 0000000000000002, 0 x 0000000000000000))

  Failure of the operating system (control bug of Windows, STOP: 0x000000D1 (0xFFFFFA810F5BD8E8, 0xFFFFF880038440C0, 0 x 0000000000000002, 0 x 0000000000000000))

  Failure of the operating system (control bug of Windows, STOP: 0x000000D1 (0xFFFFFA810F484CA0, 0xFFFFF880038440C0, 0 x 0000000000000002, 0 x 0000000000000000))

  (Bug of Windows control, STOP: 0x000000D1 (0xFFFFFA810F3C0910, 0xFFFFF88003F130C0, 0 x 0000000000000002, 0 x 0000000000000000))

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows Server 2008 R2 SP1 Standard not supported in UM 4?

  I am trying to scan a server that is running an operating system in the subject for the first time line.  I'm new to Update Manager.  I read that the first time that a scan is initialted the client Update agent Manager installs.  After you try to run a manual the following error appears in the status column of recent tasks: the operation is not supported on the object. ' I read online that it might be the version of the operating system.  Is this really the case?

  According to the relase notes it is not supported

  http://www.VMware.com/support/vSphere4/doc/vsp_vum_41u1_rel_notes.html

• Windows Server 2008 R2 SP1 Standard Running IIS Version 7.5.7600.16385

  We started having a problem where the certificate for my site https/443 links disappear. I can easily just go back in the IIS connections to port 443 and re - bind, but can someone help me determine why it started happening all of a sudden? We did not all patches recently.

  In addition, all the old, unused certificates have been removed.

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Error 0 x 80070643 installation on Windows Server 2008 R2 when installing PowerShell ISE?

  I am running a new installation of WinSvr 2k8r2 order on my server at home. and when I try to install Powershell ISE, I get error 0 x 80070643 installation.  I read the entries posted here but all are specific to MSSE and related to Win7, Vista, or Windows XP. What should I do to fix this error.
  Thank you

  Hi Dan,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows PowerShell Forum

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• 7.1 WS can run on Windows Server 2008 R2?

  Pouvez Workstation 7.1, that supports the x 64 Windows Server 2008 R2 VM guests, run on a x 64 Windows Server 2008 R2 Server?

  If it works, I can run several Machines virtual Windows Server 2008 R2.

  Hello

  RTM - http://www.vmware.com/pdf/ws7_manual.pdf PAGE 26 if you want to see for yourself. Windows Server 2008, Enterprise Edition, SP1, R2

  Windows Server 2008 Standard, SP1, R2

  Yes, he does!

  See you soon,.

  Chad King

  VCP-410. Server +.

  Twitter: http://twitter.com/cwjking

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• WLAN on Satellite L505-10Z PSLS3E with Windows Server 2008

  I have Toshiba Satellite L505 - 10Z PSLS3E on Windows Server 2008 and to install the WiFi driver but can't find the right installation files and I downloaded the Vista driver installation and the driver may be installed on the right but when I try to connect to wireless networks, I have * NO * CAN find any available networks despite many networks on my area.

  What can I do?

  EH it's always difficult to find drivers for unsupported operating systems.
  Your Satellite L505-10Z network card wireless Realtek 802.11 g (RTL8187B) inside, then you can try to search for the driver on the manufacturer's support page.