Installation of Windows Server 2008 R2 SP1 problems

Similar Questions

• vCenter Server 4.1 U1 Installation on Windows Server 2008 R2 SP1 x 64 does not work

  My vCenter Server Installation in my test environment failed with the following error:

  

  I couldn't find any article yet. Windows Server 2008 R2 x 64 SP1 is supported as a virtual machine but not not to host the virtual Center Server?

  Help, please...

  Hello.

  Is this server Windows 2008 R2 SP1 a controller domain or already running ADAM?  This may be the cause of this message.

  Good luck!

• T330 incompatibility of Windows Server 2008 R2 SP1 install USB 3.0

  The T330 has no native support for USB 2.0.  Installation of Windows Server 2008 R2 SP1 media has no native support of USB 3.0. Installation of the OS then the mouse and keyboard do not work.   I tried to inject the drivers USB 3.0 into Server 2008 Windows ISO (see: https://www.dell.com/support/article/us/en/04/SLN300618/en ).   Injection in ISO works fine and it solved the problem of no keyboard or mouse to begin the installation of the OS

  BUT once the base OS is installed and you come to the first post install screen (when it is now booting from the hard drive) to change the password and proceed with the installation, the keyboard and the mouse are again in opening.    My best guess is that the USB 3.0 drivers do not get installed on the hard disk.  I tried to start again and reinstall the operating system but same result.  The creation of the ISO by KB post above was clean and efficient.  No errors.

  "I saw a different Dell ' Faq ' recommend to disable USB 3.0 is the BIOS OF THE system.  On this current - nine T330 - model, BIOS update, there is no BIOS setting/option.

  Looking for a solution.   Had an old PCI USB 2.0 card, but the machine has no PCI ports.  Consider trying a USB 2.0 PCIE card.

  What is amazing, is that Dell sells the T330 No. USB 2.0 compatible - installation of SP1 W2008R2 difficult and perhaps impossible.  NOTE: this OS is a Dell supported OS for the T330 I would not have bought if it wasn't supposed to be supported (I am restoring a DC with this OS due to a mother failed on a server of EP).

  Solved: Bought a PCIE USB 2.0 card. This works.  Model is Sonnet Allegro USB PCIe (2.0).

  If I had known, I would have just bought the thing and ignored the whole pilot injection exercise.

• Impossible to install KB2790655 - Windows Server 2008 R2 SP1

  Hi all

  Having the "all TCP/IP ports are a matter of TIME_WAIT state" on Windows Server 2008 R2 SP1 which has been fixed in hotfix KB2553549. After searching for updates replaced for KB2553549, I found KB2790655. When I try to install it, I get the error "this update is not applicable to your computer".

  I am currently,
  N ' is not connected to the internet

  -With the help of x 64 versions of windows updates (64 bit OS)

  -Using the Intel Xeon processor

  What I tried,
  Installation/update of system tool bar. He has successfully installed and running but no dice with KB2790655.

  -Verified in triplicate that the update is already installed on my computer.

  My current issues at the present time are,
  -A security update KB2790655 replaced? I was unable to find anything after about 30 minutes of research.

  -Are there any required pre-reqs for this 2008 R2 SP1 security update? I don't see any other than the Windows RT pre - req.

  -Could you my TCP/IP TIME_WAIT problem cause problems with windows update?

  -My next step connects to the internet to try to download the update directly?

  Links,

  https://support.Microsoft.com/en-us/KB/2553549

  https://TechNet.Microsoft.com/library/security/MS12-032

  https://TechNet.Microsoft.com/library/security/MS12-032

  Thank you!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2008 R2 SP1 AHCI RAID change

  Hello

  OS: Windows Server 2008 R2 SP1
  Storage: 1 x SSD
  Tip: Supermicro X9SRW-f

  Currently, the SATA in the BIOS option is on AHCI. Start Windows on the desktop without problem.

  Objective: Convert AHCI Raid mode. The integrated chipset to create a matrix to mirror with 2 x SSD.

  I downloaded the disk driver for this card and installed the Intel Rapid Storage driver/software. I reboot and switch the SATA Raid mode. Windows starts to load and immediately blue screens. Put the SATA to AHCI mode allows me to boot successfully.

  There are a few other drivers from the disc. Install these drivers, the windows are no longer boot in AHCI or Raid mode.
  iaStorA.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver
  iaStorB.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver

  HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\ (set to 0 Start)
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV (set to 0 Start)

  How can I activate the raid option and get Windows to start without error? Registry hack? Other drivers?

  * Note the OS has been cloned for the SSD. I don't have the option for the new Windows installation.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Range of printers PhotoSmart c4780 HP; Windows Server 2008 R2 SP1

  Everyone found a way to install this printer on a running Windows Server 2008 R2 SP1 print server, or a work-around pilot?

  Hi JamesRMarvin,

  Follow the instructions below to install the driver for 990c for printing on the server.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your printer Photosmar C4780 using this driver. I would like to know if you have the same problem?

• FRM-92101: there was a failure when starting Server Forms... (R12 charge installation on windows server 2008 32-bit)

  Hello

  I encountered the following error when I try to open the form in oracle EBS R12.1.1

  It stuck for a little while and then appears an error message

  FRM-92101: there was a failure when starting Server Forms...

  (I've never been able to run the form on this)

  I ran a vision online forum that works very well which means java is ok.

  It is the new installation on windows server 2008 32-bit with costs of database (no vision).

  I search on the internet and tested all of the available options, including;

  change in the registry for example 1024,12288,1024 etc.

  marking the check box for oracle process manager to PROD "allow service to interact with desktop".

  check the configuration files of forms (all files of any bad path that I found and corrected)

  running files adautocfg.cmd for db and apps (returned errors and can be verified at the following link)

  https://DL.dropboxusercontent.com/u/60474194/adconfig%20apps.log

  https://DL.dropboxusercontent.com/u/60474194/adconfig%20dB.log

  I'm not a technical professional and unable to solve the problem, please help

  Problem solved

• Installation of Windows Server 2008 R2

  Installation of Windows Server 2008 R2 on a server without an operating system present.  Get an error 0 x 80070017.  What is the cause?  It is a new server.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I downloaded the Windows Server 2008 R2 SP1 180 trial version. How can I get the key?

  Hi, I want to install the Windows Server 2008 R2 SP1 180 trial version. I downloaded from:
  http://TechNet.Microsoft.com/en-us/evalcenter/ee175713.aspx

  but I don't have the key. How to register and get the key.

  Another question:
  Is it possible to install Windows Server 2008 R2 SP1 180 trial version as a virtual server on my Windows 7 Home premium version? If Yes, how can I do it, because it seems Windows 7 Home premium version do not support Windows Server 2008 R2 with SP1 as machine visualization.

  Thank you.

  Assessment of any version of the software Windows Server 2008 R2 SP1 does not require entering a product key.  Thus, no product key is issued.

  Q. "is it possible to install the Windows Server 2008 R2 with SP1 180 day trial version as a virtual server on my Windows 7 Home premium version?

  A. no, it is not supported.

• SITE v2.0 failed Installation on Windows server 2008 R2 with SP1

  Installing CPID v2.0 on Windows server 2008 R2 with SP1, the Setup log reported that the installation failed with the error "CustomAction RollBackSccmComponents returned error code 1603"

  I run the Setup with this command after you open the command prompt as 'Run as administrator ':

  MsiExec.exe /i Dell_Client_Integration_Pack.msi

  I even put the command above into a batch file and run it with the same result. With the help of Trace32, I also found this error to be the main problem causing the failure of this facility:

  "custom action InstallSccmComponents unexpectedly closed the hInstall (type MSIHANDLE) handle provided. The custom action must be set to not close this handle.

  Autour Googling, I came across this link: http://en.community.dell.com/techcenter/enterprise-client/f/4448/t/19416814.aspx to try to perform the steps below, but when I did the steps below, the installation just rolled back without even beginning the installation:

  Steps in the link above:

  *********************************************************************************************************

  "We have found this to be a problem with the way that the custom action is running in the MSI file, it is executed in the context of the user who was unable, we changed this to run in the context of the system that solved the problem. To do is relatively simple;

  First unzip the files from the downloaded executable deployment package. Then, download Orca here, http://blogs.msdn.com/astebner/archive/2004/07/12/180792.aspx. Once installed Orca, do a right click Extract MSI and select, "Edit with Orca. Once Orca lance, do not panic, just click on the top menu and select, "Transform", then select "Transformation." Then go to the 'Custom Actions' Table on the left and find the "InstallSccmComponents" entry on the right; Change the value in the column "Type" 3073, then go to "transform", "Generate Transform", save the transformation in the same directory as your MSI and select, and then close Orca.

  To install, use the following command line;

  MsiExec.exe /i \Dell_Server_Deployment_Pack_v1.2_for_ConfigMgr_A01.msi TRANSFORMS =-number

  = The path to the directory containing the package deployment installation files and your STDS. »

  *****************************************************************************************************

  Has anyone seen this problem before? And if so, how to solve?

  Thank you

  TeeDarling77

  I found myself by opening a ticket with Dell to get this problem finally solved. After the installation of Dell's Support log shipping, they asked me to follow these steps below:

  1 if the SQL DB is on a separate machine, try to create the "SMS_TaskSequence_Action" class in WMI under \\.\root\sms\site_ >.  You can download WMI Explorer to browse if you want to see if this class already exists.  Run the script below will not hurt if it already exists.

  a. here are the instructions to create the custom class.  First open powershell as an administrator.

  b. set-executionpolicy RemoteSigned

  c. change the extension on the attached in .ps1 file and change the file to replace the "site_abc" by "site_their 3 letter site code.

  d. change the storage location of the ps1 file.

  e... \WMIClassAdd.ps1

  f. restart and try the installation again.

  3. If it still does not work, send me the newspaper install again to look at.

  Note:

  Here is what was in the attachment in step C.

  ****************************************************************************

  $newClass = ' new-Object System.Management.ManagementClass

  ("root\sms\site_abc", [String]: empty, $null);

  $newClass ["__CLASS"] = "SMS_TaskSequence_Action";

  $newClass.Qualifiers.Add ("Static", $true)

  $newClass.Put)

  *************************************************************************

  After you run the instructions above and restarted the server, installing v2.0 CPID ended successfully.

  I hope that these instructions will help someone in the future... :))

  TeeDarling77

• Installation of Windows server 2008 on Poweredge R320

  Hello everyone

  We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.

  I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.

  We found no Raid 0 disks

  1 Vitrual disk (s) were found.

  
  I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloaded

  SAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment

  Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810 Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810

  Recommended

  5.2.220.64

  18/10/2012

  Windows Windows Server 2008 R2

  The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe

  I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.

  nodev.inf

  percsas.inf

  I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
  

  Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.

  Thank you very much

  Goudeuk

  Even I have the same problem... Can anyone suggest a solution?

  Thank you

  Scott

  http://www.vmexplore.com

• T61 4 GB RAM on Windows Server 2008 64 bit problems

  Hi, I just bought 2 * 2 GB Crucial PC5300 667 Mhz memory to upgrade my T61 that has 2 * 1 GB installed before. Hardware installation is smooth and easy, I followed all the steps in the maintenance manual. Then I restart the computer, BIOS can recognize that it has 4096MB ram installled. My operating system is Windows Server 2008 Enterprise 64-bit, which, unlike these 32-bit system, I am sure that it can handle more than 3 GB of memory. It is found in the system, and and showed there is 4 GB of memory, but in other programs like Everest, CPU - z, or Photoshop, even in the task manager all told me that there are only 2 GB of memory.

  I was confused and thinking that it might be the Crucial problem of the new memory, then I install only a SINGLE memory of 2GB each time. They can enter the system and be recognized as 2 GB. So the new Crucial memories have no problem. Then I combined the old 1 GB memory and new 2 GB Crucial memory to boot. Windows can also recognize 3 GB ram but only 2 GB of it can be used.

  It seems that 2 GB is the threshold of this system, any combination of greater than 2 GB can be recognized but cannot be used. However, it should not be like this since Windows Server 64-bit, theratically it can manage more than 512 GB of memory. That's happened? What should I do to remove this threshold? Windows problems? T61 problem.

  BTW, I've updated the BIOS of the laptop to the latest version. 01/07/2008

  This is the snapshot of the screen, my Windows is the Chinese version, but the crucial information is in English.

  http://farm3.static.Flickr.com/2194/2949357419_857717624d_o.jpg

  How dramatic is... It seems that I can use all 4 GB right now. I made a few changes and changes of the last

  Boot, however I don't know that we are contributing to the problem.

  During the last closure, I

  (1) switched the 2 Crucial memory slot,

  (2) put on the battery (it has been disconnected since the first time I changed the memory).

  (3) disabled windows virtual memory (now my laptop only works on real RAM, Yes...)

  something like this works now, thank you wjli2!

• Installation of windows server 2008 R2 on Poweredge R320

  Hello everyone

  We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.

  I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.

  We found no Raid 0 disks

  1 Vitrual disk (s) were found.

  
  I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloaded

  SAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment

  Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810 Windows 2008 R2 64 Bit driver for controllers in PERC H310/H710/H710P/H810

  Recommended

  5.2.220.64

  18/10/2012

  Windows Windows Server 2008 R2

  The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe

  I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.

  nodev.inf

  percsas.inf

  I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
  

  Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.

  Thank you very much

  Goudeuk

  PS: I posted the same topic in the forum "Blade" by mistake. Apology.

  "Do you mean that if my BIOS/SATA configuration has been set to RAID 1 I should have drivers chipset/AHCI for a successful installation?"

  No, because you are not using the onboard SATA RAID - your built-in SATA is used ONLY by your optical drive, so it should not be in RAID and AHCI usually requires special drivers, which is not required when you use optical drives.  However, pilots of chipset/AHCI may have helped Windows to see the optical drive in such a way that the installation could proceed (if she needs the RAID controller for real hard disks, you will NOT see this particular message - you will see another message when Windows cannot find not all drives to be installed on).

  "When someone would set RAID 1 for sata configuration?"

  ONLY if you use the S110 RAID controller onboard.  You use the H310, so you don't want to mess with the SATA RAID on board.

• Failed Installation of Windows Server 2008.

  Hey,.

  I recently tried to install Windows Server 2008 on ESXi 4.0.0 (revision 1).

  The installation went all the way until they have to 'Finish installation', how come wrong stop installation.

  "Setup.exe - bad image".

  

  After that, another windows came up saying that windows could not be configured for use on the hardware in my server.

  Could someone advise me to solve this?

  Thank you.

  Oliver.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• OM_5.4.0_Man_Node_A01.msp installation fails (Windows Server 2008 x 64)

  I can't get it to load the patch installer. Of course, life would be easier if Dell has released a proper version of OpenManage (with support for Windows Server 2008 x 64).

  Here are the instructions...

  Application of the Service Pack
  1 double-click the MSP file or enter the following in a command prompt window:
  MsiExec.exe /p OM_5.4.0_Man_Node_A01.msp

  And the error message...

  Windows install

  The upgrade patch cannot be installed by the Windows Installer because the program to be upgraded is may be missing, or the upgrade patch may be a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.