I get a message - SECURITY POLICY SETTINGS ON this COULD BE BLOCKING THE CONNECTION to the COMPUTER.
The following policy may need to be adjusted to allow Windows to connect: supplier of Poly: McAfee Inc. NAME OF THE FILTER. GUID_MFE_CONNECT_CALLOUT_V4 if the policy provider identified a Windows Firewall, click for more information on the setting of the Windows Firewall settings. I'm looking for advice from scientists and experienced users. My e_Mail: * address email is removed from the privacy *
Hello
· When you get this error message?
To work correctly, some programs may require you to allow them to communicate through the firewall. Follow the step of:
See also: http://technet.microsoft.com/en-us/library/cc766312 (WS.10) .aspx
http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions
Tags: Windows
Similar Questions
-
I recently C clean the computer (Vista) and cleared out some unused programs. Now, I get a message starting "search settings stopped working. Is this a problem?
Thank you
Hello
(1) are you facing problems with your computer?(2) when exactly the error message is invited?I recommend you perform the clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.You can also run the Microsoft Safety Scanner to make sure that your computer is virus-free.Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.I hope this helps! -
How to get to "local group policy editor" without typing gpedit.msc in the command run
I'm so curious to know how to get to "local group policy editor" without typing gpedit.msc in the command run
I'm so curious to know how to get to "local group policy editor" without typing gpedit.msc in the command run
You can reach the 'local security policy' of
Control of configuration\systeme and Security\Administrative tools
-
I get a message that says that it is not backup because the backup of the disk image is already in use
If you have a Time Capsule...
Make sure that no other Macs back up when
Pull the power cord to the back of the time Capsule
Count to ten
Reconnect the power cord to the back of the time Capsule
Wait a few minutes and try a backup
Report on the results
-
I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?
Hi altak38,-What is the add-on which you speak?-Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?If so, follow the steps in the following article to resolve this problem.Post back with more information for the issuance of the add-on - to help you help. -
After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?
Hello
I suggest you to refer to this link and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions
It will be useful.
-
I get a message when I am importing (this seems to be a duplicate of another picture already in the catalog) pic is grayed out.
From the library module, look for the image with the same filename and see where LR think there already.
-
I bought a LR 6 update. I received the order number and the serial number by email from Digital River. However when I try to activate the product I get a message error "we cannot validate this serial number.
Hi avijitm,
You are using a Mac or Windows computer?
Make sure there is no hosts blocking Lightroom entry onto the Adobe servers.
Follow solution 3 referred to in article Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications
See Error failed to validate the serial number | CS6
Let us know if that helps.
Kind regards
Assani
-
I recently bought creative package of cloud of adobe and now I get a message 'we are in trouble, check your membership' whats the story? I am registered and I am charged!
Hello
Please follow we are having trouble verifying your membership.
Hope that helps!
Kind regards
Sheena
-
I get a message 'Adobe Illustrator has stopped working. Please activate the Verdana fonts and relaunch Illustrator. "I looked in my fonts and I do not have the fonts veranda. What I would do.
You must install all four members of the family of Verdana fonts on your machine. Please check the following thread that corresponds to your question:
http://forums.Adobe.com/message/5905430#5905430
Kind regards
Rambour
-
When you access a document online, I get the message "this document requires the comprehensive security policy must be disabled" I can not understand what to do to access my account.
The document is directing to "please go to Edition > Preferences > JavaScript and uncheck the box"Enable the Global Policy object security".»
I have a problem to find this action in the security settings.
Hi, Brenda Collins,.
This error message occurs when you try to view the PDF files, I suggest you to follow the steps below and check if that helps.
1. launch the Adobe Acrobat Reader software on your computer.
2. click on 'Edit' in the main menu bar.
3. click on "Preferences" at the bottom of the list of the menu Edit options.
4. click on 'JavaScript' halfway to the bottom of the list of categories on the left of the Preferences window.
5. make sure "Enable Acrobat JavaScript" is checked.
6. make sure that "enable global object security policy" is NOT checked.
7. click 'OK' to save your changes to preferences.
-
I remember more recent changes. I use automatic updates and installing Service Pack 3. Symantec Norton 360 is installed to protect against viruses, but this is not new.
Here is another example of an error message: NDP1.1sp_KB953297_X86_msi0.logversiontxt. I get every day two or three error messages.
Hello
The problem is with the update of security Microsoft .net Framework 1.1 sp1.
There could be a corruption with the .net framework.
First of all try to download the package to update from Microsoft Download Center and install it on the computer:
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=78ac8b97-8327-4AE1-8BB0-6cf227f3968fIf manual installation fails, you must delete all versions of the .net framework from the computer and then reinstall on the computer.
Follow the steps mentioned in the link to the following Microsoft article:
http://support.Microsoft.com/kb/923100Cheers and enjoy... :))
-
About a third of a page of computer code, computer language, etc., above e-mail messages that I get when I go to the front or send an electronic mail message. This inconvenience was never there until I turned the computer back after cutting during a thunderstorm.
Looks like you got the full headers display.
Suggest you try this:
Display > headers > Normal -
Why message 'Confirm your time zone' at every restart of the computer?
At each reboot, my computer asks me to confirm my time zone. After I do, I get an error message. These additional steps do not affect the operation of the computer, but they are annoying.
Windows 7 operating system.At all times the Earth clock is not a Windows 7 application.
I would check with the author of this software.
http://individualsoftware.com/software/personal_organizer/anytime_organizer_deluxe/
-
need security child lock to keep from turning on the computer
OK, I admit that my Grand-child under 5 years is fast and smart. Because he has figured out how to touch the button lights up and will, I can't keep his hand offs. If there is only a proof cover protection child for a locking of the monitor screen and the laptop and the phone please let me know. If this isn't gadget guru that came. I know I'm not the only one who has this problem and how many children made up your phone or open your screen.
Your Mac is probably configured to connect automatically when you turn it on. Please read the value of your Mac for you connect automatically on startup. To prevent him from doing this, select 'disabled' in the drop down menu to an automatic connection.
To require a password after waking from sleep, please read OS X El Capitan: ask for a password after the awakening of your Mac.
To prevent someone from using your Mac after the start of his screen saver please read "Locking your screen" in the basics of the Mac: display a screen saver when you are not using your Mac - Apple Support. You can easily configure your screen saver to start instantly, by designating a 'hot corner '. This method is also explained in this document.
Please read using a password with your iPhone, iPad or iPod touch - Apple Supportfor iPhones.
OK, I admit that my Grand-child under 5 years is fast and smart.
They get only smarter and faster.
Maybe you are looking for
-
Is it possible to customize the right-click menu?
I use FF4 RC2 and I wonder if it is possible to customize the context menu? In FF3 if you right click on a tab lists ' new tab '. Reload tab reload all tabs... "etc. but in FF4 if you right click on a tab lists only "Reload Tab | PIN as App Tab... "e
-
Equipment does not respond when connected with the desktop remotely
Hello I have a PC with labview controlling a power supply via a serial connection. It works fine, except when I am looged in remote to my PC from another PC lab via desktop remotely. The VI runs correctly, but does not have the equipment to receive o
-
Computer cannot start an operating system STOP error message: 0 x 00000024
Origianal title: computer can not boot the operating system Appeared in my computer: STOP: 0 x 00000024 (0 X 00190203, 0X82F4D5D0, 0x00000000 What is happen?
-
Hi all I don't know that it is a pretty basic question. I'm doing a disk cleanup and he asks me if I want to delete 'temporary files '. Not the "temporary internet files" 'temporary files. It gives me an option to delete internet temporary files
-
H390-Logitech USB Headset does not install
H390 USB LOGITECH HEADSET DOES NOT INSTALL After that several attempts - system looking for drivers - will not install driver successfully - tried them all used without success. running Windows 7 x 64 This is supposed to be plug-and-play (game should