I get a message that my APPS. INF files are missing

Similar Questions

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I constantly get the error 'could not get new comments. One or more files are missing on the server.

  I constantly get the error 'could not get new comments. One or more files are missing on the server.

  It gets a little old. I know that the files are there. There is some ongoing compatibility issue?

  Hi kuntzmd

  Please visit: http://forums.adobe.com/thread/533034

  http://forums.Adobe.com/thread/33586

• I'm not able to open my documents pages. I get the message: the requested index.xml file is missing.  I wonder if it is because I have updates 10.11.5

  I have an iMac (20-inch, mid 2007) processor 2 GHz Intel Core 2 Duo 3 GB 667 MHz DDR2 SDRAM memory and recently updated to el capitan 10.11.5.  I have Pages ' 09, and I can't open my documents pages and get the message:

  The index.xml file required is missing.

  I now see that it says return to default pages 5.6.2.

  I can open them as 5.6.2 then save tehm in pages ' 09?

  Can someone help me with easy tips?

  Only the Pages ' 09 or old documents contain internal index.xml file. When you try to open a document in Pages ' 09 Pages v5, you get this dialog on the missing index.xml. The key is to stop Pages ' 09 and then double click on the document to open it in v5.6.2 Pages.

  Pages ' 09 will not leave by simply clicking on the red light on the title bar of the document. As long as the Pages ' 09 continues to run, it will intercept all attempts to open any document Pages, including incompatible versions of the v5 Pages.

  This has nothing to do with OS X 10.11.5. He has been a user focused on the issue since October 2013.

• Try to install Itunes 64-bit, get the error message that says a DLL file is missing. How can I fix?

  I have windows 7, 64 bit.  I am trying to install ITunes 64-bit Installer but get an error message indicating that a DLL file is missing.  How can I fix?

  Hello

  Welcome to the Microsoft community, the best place for all windows related queries.

  I see that you can not install iTunes 64-bit install as it says .dll file is missing.

  I suggest to download the installer once more and then try to install it once more.

  If you still experience the problem, then I recommend you view the query on the Apple support forums. Here is the link for your reference.

  https://discussions.Apple.com/index.jspa

  For other Windows-related issues feel free to get back to us. We're always here to help.

• problem opening document pages. Get the message: the requested index.xml file is missing.

  I can't open the document 'Pages' and get "the index.xml file required is missing."

  You should post the related issues of Pages in the Pages for Mac community support.

  You try to open a document v5 Pages in Pages ' 08 or 09 ' which does not support the format of document Pages v5. Exit your application Pages ' 08 or 09 ' and then double-click the document even have it open in Pages v5.

  When you are in Pages ' 08, ' 09, or same v5, the red light on the title bar of the document just close the current document and fails to complete Pages.

• I accidentally deleted my bfore reading e-mail, is their anyway to get the messages back. Junk & trash files are emty

  I accidentally deleted my messages in my Inbox in. I need them back. I checked the unwanted files and trash, but not luck.

  I'm sorry to say, unless download you them to your computer (using thunderbird) and a master in restoring data with portions of your hard drive which is counted as dead space or can bring to a data restore (both directions, your chances are slim at best), you have to say goodbye to your messages.

• error messages: rundll.exe and system32 files are missing or 'something' I have tried to put in the original for my Windows XP Professional disk and could not do. Someone walk me through what to do with it?

  Error message when I try to "Set up the home network" or some other things I try to do. It is the system32 file rundll.exe or that my computer can not find.

  How are you trying to set up the network? Exactly what you do when you get the error? And please quote the error message exactly.
  What is your configuraiton of network (router, points of access, switches, direct cables, etc.)?
  What operating systems are the computers that are running? MS - MVP - Elephant Boy computers - don't panic!

• When I run CC2015 I get a message that ON Core Foundation9.dll is mising. How can I fix it?

  When I run CC2015 I get a message that ON Core Foundation9.dll is missing. How can I fix this and what is it?

  It's a third party plugin file. Check your plugins. You may have to reinstall, or contact the manufacture to see if they have an update for 2015.

• Outlook Express Inbox messages or files are missing.

  Yesterday morning, Monday, January 24 when I open my browser to surf on Outlook Express, I discovered that all my messages in Inbox and / pr files are missing. I was given the opportunity to click on in order to replace the most recent data in the box to pop up on the screen: compact down, it seems like. Thinking that assistance, I innocently click on 'Yes', this is the result: all incoming the previiousd and this letter is as gone with the wind (disappeared).

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  About file Corruption:
  http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspx

  Recovery methods:

  If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

  To restore a folder bak on the message store folder, first find the location of the message store.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:

  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx

  And see:
  http://www.oehelp.com/OETips.aspx#4

  A general warning to help avoid this in the future:

  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• the installation of itune + quick time I get a message that reads "no can access network location % data%\ app. »

  had 2 users on the computer with itunes on the desktop. main user itunes has stopped working, but the secondary users still worked. tried to update software with the latest version but get a message that reads "not access network location % data%\ app.

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is in http://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry way to create a point in http://www.howtogeek.com/howto/windows-vista/create-a-restore-point-for-windows-vistas-system-restore/ restoration system just to be on the safe side.

  Here are the steps to fix it.

  1. click on start, run, type regedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KB http://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point to new, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, click change, type the value in the value data for the value name box, and then click OK. The value data must be: % USERPROFILE%\AppData\Roaming. Change it if necessary.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key.  If this does not work without the full procedure, follow ALL the steps in the referenced article.

  I hope this helps.  If not, post back with the results of what you tried.  Rear post anyway so we will know what happened.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

  Hi sonalnj,

  I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

  According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

  iPhone 6 s Tech Specs
  http://www.Apple.com/iPhone-6s/specs/

  Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

  OS X Lion mountain
  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Nice day!

• I can't open attachments on my iMac - get a message that I need a win mail.dat application

  I try to open an attachment on my iMac - I get a message that I need an application that will allow me to open win mail.dat - does anyone know if I need any special software to open these attachments?

  Looking for player WinMail Dat in the App Store for $1.99. There may be a free alternative.

• Unable to defragment the hard drive get a message that says: incosistancies in the file system

  Original title: cannot defragment the hard drive

  I have windows xp. All dates are updated. Whenever I try to defragmant my c drive I get a message that says: incosistancies in the file system and told me to run chkdsk and scan disk and try to defragment again but I keep getting same message. How can I fix it?

  Hi cliffordsevec,

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Relocation of defragmentation

  (a) in the disk, find the directory c:\Windows\Inf. If the system directory is not on the c: drive or not named Windows, find by clicking on "Start", then "run" and type %Windir%\Inf in the area.

  (b) find the file called dfrg.inf.

  (c) right click on the file and select "install".

  Step 2: Repair defrag

  un) Click on "Start", then "run", run this command: regsvr32 dfrgsnap.dll.

  (b) click "Start", then "run" and execute this command: regsvr32 dfrgui.dll.

  (c) run Defrag.

  Method 2: Follow the steps in the article.

  Disk Defragmenter does not work on a Windows XP-based computer

  http://support.Microsoft.com/kb/922379

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.