I get an error 43 trying to connect to my iPod Touch 2nd Gen

Similar Questions

• I get this error DNS tries to connect to facebook, but no other site I noticed my internet is very slow right now too.

  I get this error DNS tries to connect to facebook, but no other site I noticed my internet is very slow right now too.   Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the address of the DNS server

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\mark>ipconfig/all

  Windows IP configuration

  Name of the host...: cookiemonster

  Primary Dns suffix...:

  Node... type: mixed

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: ccrtc.com

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 68-A3-C4-22-8B-C3

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : ccrtc.com

  Description...: Realtek PCIe FE Family Controller

  Physical address.... : 64-31-50-43-AE-8F

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::3458:a8df:c03c:d596% 12 (Preferred)

  IPv4 address...: 75.103.136.150 (Preferred)

  ... Subnet mask: 255.255.252.0.

  Lease obtained...: Wednesday 10 October 2012 21:16:34

  End of the lease...: Thursday, October 11, 2012 21:16:34

  ... Default gateway. : 75.103.136.1.

  DHCP server...: 209.132.160.25

  DHCPv6 IOOKING...: 207892816

  DHCPv6 DUID customer...: 00-01-00-01-14-FF-6D-A2-64-31-50-2E-2F-F5

  DNS servers...: 209.132.160.4.

  209.132.160.5

  NetBIOS over TCP/IP...: enabled

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: 802.11n wireless network adapter

  Physical address.... : 68-A3-C4-22-8B-C2

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : ccrtc.com

  ... Description: Microsoft 6to4 card

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2002:4 67 b: 8896:4 b 67:8896 (Preferred)

  ... Default gateway. : 2002:c058:6301:c058:6301

  DNS servers...: 209.132.160.4.

  209.132.160.5

  NetBIOS over TCP/IP...: disabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  Active DHCP...
  . . . . . . . . : No.
  Autoconfiguration enabled...: Yes
  IPv6 address...: d 2001:0:9 38: 6ab8:3482:e41:b498:7769 (preferred
  EXEs)
  Address IPv6 local link...: fe80::3482:e41:b498:7769% 16 (Preferred)
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled
  Tunnel adapter ISATAP.ccrtc.com:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : ccrtc.com
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  C:\Users\mark >

  Hello

  Thanks for asking! If I understand correctly, you cannot connect to Facebook and get error, Internet is also slow. Try the question of fixing.

  Before I continue, I would like to collect some personal information.

  1. have there been recent changes to the system before the show?

  2. what web browser do you use?

  Method 1:

  Follow this link can not connect to some Web sites to perform the troubleshooting steps. Check if it helps.

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Method 2:

  Follow this link Internet connection is slow , and perform the operations. Check if it helps.

  Method 3:

  Follow this link, Update driver and update the network map. Check if it helps.

  For more information, see: link

  Answer us with the results. I'd be happy to help you further.

• I deleted by mistake my certificates. Now, I get the error messages trying to connect to gMail, eBay and my bank accounts, etc.

  I recently did some "housekeeping" on my computer and for reasons known only to nini-gods, I delected all my security certificates. Now, when I try to log in to gmail, ebay, my bank accounts or any https:// site, I get a warning message "this connection is Untrusted." I click on the links provided to overcome the safety message, but whenever I return to the site I have to jump through all the hoops again. I see a small box that can be clicked to confirm security exception, but the little box that must be clicked to "make the permanent exception" is always grayed out. I know I'm on the right sites - have been using the links on the personal bar for years without problems. It started right after I deleted the certificates.

  I've tried everything. Firefox RELOADED (use 3.6.4) deleted and reloaded the bookmarks, follow the instructions when I get the error message. Nothing works. As soon as I close the browser, and then go back online, I'm back to error messages.

  Can anyone help?

  COR - el: thanks a lot for this solution. Everything works fine now.

  However, I had a problem with deleting the files. I dragged to the trash, and then tried to access the sites in question and received the same message. I restarted the computer and when I checked the files I was dragged to the trash were right where they were before. The only file that are been trashed was the .txt file.

  So I renamed them as you suggested and now everything works fine.

  Thank you again once - I tried to understand by using the troubleshooting Firefox site, but your explanation was simple and easy to follow.

  Val

• I can't connect to the internet, get a message when trying to connect it says windows cannot access the specified device

  I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop

  Hi MelissaBoltik,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to reset the TCP/IP settings.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Internal server error when trying to connect Facebook to Toshiba Places

  I'm looking for help with a problem I've met by using my toshiba SMART tv. I can't link my Facebook to my toshiba places account, it shows "internal server error" while trying to connect via the link given in the statement in the email I received.

  Can someone please help?

  Internal server error means that there is a problem with the server and nothing worng with your account.

  No doubt some temporal problems of the server recommend you simply wait until this problem could be solved.

• I get the error code message please connect firewall and protection antivirus please help

  I get the error code message please connect to the internet to validate your serial number, but I'm connected to the internet, I have disabled firewall and virus protection please help

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Why do I have a 'General' error when trying to connect to a site on my laptop, but my office works fine?

  After an update from Microsoft, I tried to connect to a gambling site, but all I get is a "General error". He told me to refresh the page and try again. When I go to my office, I have a problem to connect. Why? Desktop is running xp, computer laptop windows 7.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Error message trying to connect to the wireless network

  Trying to connect my new netbook to my wireless router, I typed the number 10 WEP key, but on the list of wireless network, it says I'm connected but it's 'validation of identity '.  And at the bottom of the screen, I get the error message: unable to find a certificate of Windows to connect to the network. And of course, I can't get online.  I tried to repair the connection and troubleshooting, all to no avail.  How do I overcome this barrier?

  Moecat,

  Take a look at this thread: http://social.answers.microsoft.com/Forums/en-US/xpnetwork/thread/f68d2ea6-51c4-4b86-a5de-da4d06afb50a
  That should take care of your question, let me know if you need help!
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error code 651 when connecting to the home group

  Original title: network query

  I am trying to connect PC (Win7 Ultimate with all the updates and I have installed Sp1) to a homegroup that my surface pro4 (Win10) opened. I get error 651 and I can not now clear homegroup even by using the Troubleshoot utility. Help, please

  Hello Kurt.

  Thanks for posting that ask you about Microsoft Community.

  According to the description, you found the 651 error when you plug the system windows 7 on a home group.

  First of all, make sure that:

  • Both systems must have a unique name.
  • Both systems need to have the same time and date.
  • Some antivirus/security programs may block or cause network problems.

  As you already ran her convenience store. I suggest to follow the methods below and check if that helps.

  Method 1: Temporarily disable security software

  Temporarily disable the security software and check if the problem persists.

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, try Method 2,

  Method 2: Disable IPv6 for your connection

  You can do it by the separation of the adapter in the local area network connection properties dialog box:

  1. Click Startand then click Control Panel.
  2. Click network and sharing Center.
  3. In the box to view your active networks , click Local area connectionand then click Properties.
  4. Networking tab, clear the Internet Protocol Version 6 (TCP/IPv6) check box, and then click OK.

  Reference:

  How to disable IPv6 or its components in Windows

  See also:

  Why can't I access my homegroup?

  Hope this information is useful. Please let us know if you need help with Windows

• Error 651 trying to connect to the internet

  I am running Win7 Home Premium and and I get a 651 error trying to connect to the internet. I replaced the file rasppoe.sys with an another working Win7 pc, but this did not help. I also tried the same file from a Vista laptop but still no joy of work.

  I also disabled the connection of ivp6 nothing helps

  I use Virgin Media as my ISP access and you connect using a network modem.

  Any help would be appreciated I'm going crazy trying to fix it.

  Thanks in advance

  Is it only started recently? You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the McAfee removal of Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• ORA-28545-error when trying to connect to a MSSQL DB

  Like many others, I came across problems trying to connect to a MSSQL-DB. I tried various things mentioned in the forum, but nothing helped.

  I did the following:

  On Windows INFORDBSERVER02 servers where our Oracle11-Installation is hosted, I installed the software bridge in a different location.

  During installation, I decided to use the port 1531 for the listener, and then asked me about the connection parameters to our MSSQL Server:

  Our database is located on the 'profileserver02' server and the DB is called 'profile', but there was an entrance third (for me unknown) and I gave him the same value

  as the name of the server.

  The listener has started and there was a listener.ora with the following entries:

  LISTENER_PROFILE =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1531))

  )

  )

  ADR_BASE_LISTENER_PROFILE = D:\Ora_GW

  I then checked the initdg4msql.ora, which had entries

  HS_FDS_CONNECT_INFO = [profileserver02] / profileserver02/profile

  HS_FDS_TRACE_LEVEL = OFF

  HS_FDS_RECOVERY_ACCOUNT = RECOVERY

  HS_FDS_RECOVERY_PWD = RECOVERY

  On the server where I want to get access, I've added an entry for the tnsnames.ora:

  dg4msql.INFORDBSERVER02 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = INFORDBSERVER02.fmbb.local)(PORT = 1531))

  (CONNECT_DATA =

  (SID = dg4msql)

  (GLOBAL_DBNAME = dg4msql.INFORDBSERVER02)

  )

  (HS = OK)

  )

  Finally, I created a link DB:

  CREATE DATABASE LINK PUBLIC profile02 CONNECT TO "anw' IDENTIFIED BY 'password' USING 'dg4msql.infordbserver02 '.

  I tried to access the DB in issueing of position

  Select * from dual@profile02

  I got the errormessage:

  Error: ORA-28545: Von Net8 bei der zu einem Fehler diagnostizierter agent connection

  Cannot retrieve the text of the message NETWORK/NCR 65535

  ORA-02063: before 2 lines von PROFILE02

  SQLState: 99999

  ErrorCode: 28545

  Position: 19

  I changed one line in the listener.ora, namely

  HS_FDS_CONNECT_INFO = //profile [profileserver02]

  that got rid of this third unknown parameter, but nothing has changed...

  I tried to use the listener.ora.sample in the dg4msql directory

  LISTENER =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ORACLE_HOME = D:\Ora_GW)

  (PROGRAM = dg4msql)

  )

  )

  #CONNECT_TIMEOUT_LISTENER = 0

  but then the listener has not yet started.

  Any tips?

  For the first listener that you posted you do not have a section of SID. So he won't be able to lay a bridge. In addition, it would be easier when you use the earpiece of the spawn House door entrance to the gateway process o gateway.

  So put a listener.ora file at your home, gateway network\admin with this content:

  LISTENER =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=localhost))

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ORACLE_HOME = D:\Ora_GW)

  (PROGRAM = dg4msql)

  )

  )

  Then stop the LISTENER_PROFILE listener, open a DOS window and correctly set the ORACLE_HOME. Change to D:\Ora_GW\bin and start the listener using lsnrctl start.

  What I don't understand is your comment:

  "

  I changed one line in the listener.ora, namely

  HS_FDS_CONNECT_INFO = //profile [profileserver02] '.

  I assume you are talking about initdg4msql.ora...

  So let's just check the link if it works...

  If not, please provide a status of Auditor for the listener of the entry door and an exit of tnsping from home using "tnsping dg4msql.INFORDBSERVER02" database Oracle

  -Klaus

• Get the error: 0x7C92A82C (tried to write to 0x00030FC8), access violation was abolished in computer science

  Original title: error: violation of access 0x7C92A82C

  I'm under win xp sp3, I get this message after the airstrike, I installed: error: violation 0x7C92A82C (tried to write to 0x00030FC8), program terminated access. Please help me guys, thanks.

  Hi Iwan,

  Welcome to the Microsoft community!

   

  After you have installed the Airstrike game, you get error access violation 0x7C92A82C (tried to write to 0x00030FC8), has been abolished.

   

  1. When do exactly , you get this error?

  2 - is the full name of the game?

   

  Respond with more information so that we can better help you.

  See the article:

   

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

   

  If you need any other assistance, let us know and we would be happy to help you.

   

   

• Whenever I try to move/scanning/reading messages in WLM I get the error msg 'we cannot connect to WLM now. "

  For about a month now (may be related to the installation of the Service Pack?), whenever I try to move/scanning/reading messages. in Windows Live mail, I get the same error message "we cannot connect to Windows Live Mail right now. Please try again later. You may not be connected to the Internet. "But I'm certainly online, it shows up on the taskbar.  Can someone please?

  Hello

  The question you have posted will be well suited in Windows Live Mail Solution Center. I suggest you to send your application in Windows Live Mail Center Solution for better support

  http://windowslivehelp.com/product.aspx?ProductID=15

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• BlackBerry Smartphones error message trying to connect the BB and Desktop Manager

  I've had my BB for a few months now, and I used to be able to connect to my laptop and synchronize Outlook data. Now it doesn't connect to Desktop Manager more. I always get an error message, and it's the plug technical it "sends" to which anyone, in error reports:

  C:\DOCUME~1\GAYLEE~1\Locals~1\Temp\WERc171.dir00\DesktopMgr.exe.mdmp

  C:\DOCUME~1\GAYLEE~1\Locals~1\Temp\WERc171.dir00\appcompat.txt

  How to make BB to connect to DM and start the synchronization again?

  Thanks for help.

  I see that a lot of timing issues lately, forced windows security update last week looks like maybe it's the culprit. Reinstall DTM has set for a few PC for me. Just think if you want to uninstall 4.3, might as well update on installation.