I get error loading \3\DLCXtime.dll

Similar Questions

• At the start I have receiver error loading \3\DLCXtime.dll

  When I boot I get "error loading \3\DLCXtime.dll".
  The specified module could not be found.

  I know that this has to do with my old Dell printer driver drivers, but I've improved my printer and no longer have the old Dell on my system. I thought that I had uninstalled all the software from Dell, but obviously not.

  What should I do to rid my computer of this left over trash? Thanking you in advance.

  Kind regards

  G. Bowes

  E-mail address is removed from the privacy *.

  Hello

  DLCXtime.dll is part of the Dell printer drivers. You probably need to reinstall to check the status.

  You can contact Dell technical support for known problems.

  You can view this issue in the community Dell here: http://en.community.dell.com/support-forums/peripherals/f/3528.aspx

  You will get updates Dell drivers here: http://www.dell.com/support/home/us/en/19?c=us&l=en&s=dhs

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• To sttartup error 'loading\3\dlcxtime.dll run.dll error. "

  Original title: ERROR LOADING \3\DLCXTIME. DLL

  When I start my computer I get this error message: RUN. LOADING\3\DLCXTIME DLL ERROR. DLL HOW TO REMOVE THIS

  Hello

  You did changes to the computer before the show?
   
   
  DLCXtime.dll is part of the Dell printer drivers.
   
   
  Method 1:
   
  Step 1:
  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
   
   
   
  Step 2:
   
  Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
   
  Method 2: Uninstall and reinstall the printer and see if that helps.
  Reference:
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• At the start, get error loading driver udesiab.dll

  on startup, I get an error loading driver udesiab.dll, no matter who with an idea what is this driver or how can I remove it?

  Hello

  read the slot results in google for "udesiab.dll."

  http://www.google.com/search?hl=en&source=HP&q=udesiab.dll&aq=f&aqi=&AQL=&OQ=

  There is no search results for her that usually indicates that it is malware or a stay starting entry of for her

  to be on the good side for malware scan;

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• What should I do if I get: "error loading library commonforms.dll::registerwindow?

  Trying to activate Anti-message get virus above.

  Hello

  1 are. what anti-virus software you referring?

  I suggest you to contact the support team antivirus helps with your product activation.

• I get 'error loading '... C:\ProgramFiles\CommonFiles\ParetoLogic\UUS2\UUS.dll... The specified module is not found .___How can I fix it?

  I get 'error loading '... C:\ProgramFiles\CommonFiles\ParetoLogic\UUS2\UUS.dll... The specified module could not be found.

  How can I fix it?

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/ MS - MVP - Elephant Boy computers - don't panic!

• I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

  Error loading \3\DLBUtime.dll

  I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

  I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

  Can someone help me with this?

  Aprilm,

  You are LuLu5119, who posted a question last August?

  If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

  Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

  In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

  Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

  Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

  If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

  As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

  MalwareBytes Anti-Malware: http://malwarebytes.org/
  SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

  For MalwareBytes Anti-Malware, download, install, update and run.
  For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

• At the start of XP, make error rundll error loading \3\lxcctime.dll

  When windows load I get this error rundll error loading \3\lxcctime.dll. How can I fix it?

  OS: windows xp home edition. recently had a lot of viruses on the computer. mainly Trojan viruses

  When windows load I get this error rundll error loading \3\lxcctime.dll. How can I fix it?

  This error is related to your Lexmark printer.  The following procedure may solve this problem, although I've seen conflicting reports.

  Follow the instructions here to uninstall and reinstall the printer software: Article 1.  Between steps 4 and 5, perform the following steps (if you can not complete step 4, post back with this information):

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following commands in the black command prompt window, pressing ENTER after each line.  Note that there is a space after the = not before

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  To step 6, start here: http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

• In XP C;\windows\sec710.dll & C:\windows\imubuhuwonezonus.dll get "Error loading, be found" computer freezes

  C;\windows\sec710.dll & C:\windows\imubuhuwonezonus.dll, I get this "error loading, be found", the computer freezes? Can't find these files?
  A restored and does not work. A ran malware and viruses. These files are not listed.

  If I leave my computer for a while it freezes. When you click Ctrl, Alt, DEL, it goes to my security window.

  Do the first, launch scans, then if your computer is always bad conduct, we'll fix it.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• When computer booting XP, get "error loading C:\WINDOWS\sversrit.dll".

  Hi, can someone help me please. I get the message "Error loading C:\WINDOWS\sversrit.dll" when windows starts. I think it might have something to do with Outlook Express, because around the same time I started having problems with forwarding of emails with attachments. Thank you.

  A Google search for the name of the file is without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run both of these free analysis tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• After the clean boot get error loading awuspn.dll and load yabbyx.dll error. The specified module could not be found

  Hi Thahaseena,

  Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?

  Thank you

  Well, I want you to do is run MalwareBytes.  You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?

  Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software.  What is the name of this program.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• When you try to run the Network Setup Wizard, I get error loading rundll hnetwiz.dill.

  Trying to set up home networking on my windows xp, I get this message ("error loading hnetwiz.dll specified module is not found") I'm sorry I'm dumb as a box of rocks...

  Hello pat,

  You're trying to network the two versions of Windows by following the instructions in this article?
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• When I turn on my computer I get errors on Windows Update.dll and Conduit update\conduitupdt32.dll profile

  It is full error:

  1. C:\Documents and Settings\All Users Application Profile Update.dll load error.  The specified module could not be found.

  2 error loading C:\Documents and Settings\Application Data\Conduit Update\Conduitupdt32.dll HP_Owner.  The specified module could not be found.

  I use Windows XP Home Edition for my OS.

  Thank you.

  Check if the files are in the default location of C:\windows\system32\ProfileUpdate.dll.

  You can also try to re - register the .dll file.
  Go to start/run.
  Then type regsvr32 Windows profile Update.dll.

  Must return, command has completed successfully.

  Ditto for the conduitupdt32.dll.

  Let us know if that helps.

  Marilyn

• Error Msg: your msg error loading win\jquarayeh.dll

  Each time computer is the startup error msg pop up: your error msg load win\jquarayeh.dll.  What is this msg and how to fix it?

  Each time computer is the startup error msg pop up: your error msg load win\jquarayeh.dll.  What is this msg and how to fix it?

  You are not charged by the letter when you post here.  Generally, it will display the full error message.  However...

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.  There is no success for jquarayeh.dll

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Error loading windows: msvex2.dll cannot be found

  My computer has been infected by the Virus think Point. I ran Malware Anti-Malware bytes and followed these instructions

  http://www.precisesecurity.com/rogue/think-point/

  When I load windows now it says Error loading c:\\windows\msvex2.dll specified module cannot be found.
  I was able to download and install the latest service pack and it worked but windows keeps freezing and try to update AVG Free has given me a blue error screen.

  Anyone has any experience with this problem and know how to fix?

  Please see when I connect to my PC, I see a ThinkPoint window in this forum.

  If this does not resolve the problem, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional