I get error messages because I have no space on my OS partition

Similar Questions

• Get error messages whenever I have try to defragment, & I also lost storage space. (less than 1%).

  Original title: memory problem & Defrag.

  I have a problem of the 2 part that has been building.  I get error messages whenever I have try to defragment, & then the Defragmenter stops.  I was just let go of the problem.  But then I noticed that I lost the memory space.  I deleted almost all of the programs that I can, but I still only 277MB of available memory (less than 1%).  I don't know what is using all my hard drive space.  There are only a few programs installed.  I'm also 99% fragmented.  Defrag won't work without releasing the memory of 15%, but even if I HAD the memory, all I ever get is an error message when I try to defragment.  Now, my computer is so slow, it takes about 3 minutes to open a web page.  As it should be obvious, I'm not all that tech savy.  What can I do?

  Right-click your drive (C :) and select Properties, click on disk cleanup, select the file that you want to remove and read the details below.) Put a check mark in the box of files that you want to remove and click OK.

  Now again click on disk cleanup and click on more Options tab ignore Windows components and programs installed.

  Under the system restore click clean up, and then click Yes if you do not experience other problems besides those that you mention in your message.

  Now, try to run Defrag and if you are unable to read the article below.

  http://support.Microsoft.com/kb/922379

• Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no p

  Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no problem. Can someone help me? Thank you.

  Is there a file .idlk remaining on the server which is not removed properly?

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.

• Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think.

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  CBTEKRONY wrote:

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell

  I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance

  original title: where to find WIndows Poweershell?

  Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• I did an update yesterday and now my lightroom 6 and elements will not open. I get error messages / error 16 on lightroom and we have tried everything, including the creation of a new Director. Help!

  I did an update yesterday and now my lightroom 6 and elements will not open. I get error messages / error 16 on lightroom and we have tried everything, including the creation of a new Director. Help!

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

• try to download the software: via the link provided in the email, I get an error page «» Then I tried via my account by clicking on the link 'Download' screen 'my order. " Then, I get a message saying "you have no download. I'm almost ready to fi

  Hi, I just bought first elements. I paid online via Paypal. I got the Adobe confirmation email a few hours later. I then try to download the software: via the link provided in the email, I get an error page «» Then I tried via my account by clicking on the link 'Download' screen 'my order. " Then, I get a message saying "you have no download. I'm almost ready to file a complaint with Paypal for fraudulent online sales. What should I do?

  Hi H D,

  Tell us the name of the product you have purchased.

  Please visit: http://www.adobe.com/downloads/other-downloads.html

  Let me know if it helps.

  Concerning

  Megha Rawat

• Ink cartridge Laserjet M1212nf MFP and I get error message "install black cartridge.

  I have installed and reinstalled the ink cartridge black for my Laserjet M1212nf MFP and I get error message "install the black print cartridge.  I pointed out quite in the restart including manual online, the fact to unplug printer, etc..

  Help, please.

  This error of "Install black cartridge" is usually caused by a piece of packaging material that remains on the cartridge. The document below should help you to solve the problem. If this does not work, try to do a hard reset. If neither works, let me know.

  Toner blinking or 'Install black print cartridge' Message is displayed on the control panel:
  http://goo.GL/Nlqpg

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• The Pogo Club game I keep getting error messages

  The Pogo Club game I get error message "this application has requested execution itin an unusual way." c:\programfiles\aol\desktop 9.6\aol browser.exe. I have greatly appreiate Help!

  Hello TBone1953,

  1. What is the version of Windows installed on your computer?

  2. you use Internet Explorer or another browser to go to the game site?

  If you are using another browser other than Internet Explorer, I suggest that you use Internet Explorer and check to see if you have the same problem.

  Pogo uses Java, so it's probably that the problem might be related to Java or the browser installed on your computer. You can try the methods below to resolve this issue.

  You can follow the link below to install the latest version of Java:

  http://Java.com/en/download/index.jsp

  Also try installing the latest version of Flash player.

  I suggest to uninstall the Flash Player using the Flash Player uninstall program:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  You can download and install the latest version of flash player by following the link below:

  http://get.Adobe.com/flashplayer/

  However, please confirm the version of Windows and the browser you use on your computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• When the download or installation of SQL update KB970892 on the Site to update, I get error 0x737D. I have Windows XP Professional Service Pack 3__

  When the download or installation of SQL update KB970892 on the Site to update, I get error 0x737D. I have Windows XP Professional Service Pack 3. I don't know how to solve this problem. Thank you.

  Hi torito63,

  Error 0X737D while updating Windows means that a previous update of Microsoft SQL server does not complete the installation.

  To complete the installation, follow the steps below:

  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.

  2. Select Microsoft SQL Server 2005 and then click on edit.

   3. from currently installed programs, select Microsoft SQL Server 2005 and then click on edit.

   4. in the selection of the components, select database engine and then click Next.

   5. in the maintenance of function, select database engine and then click Next.

   6. in the installation of Microsoft SQL Server 2005, click Next.

   7. in the System Configuration check, click Next.

   8. change or remove an Instance, click on complete the suspended installation.

   9. by error and usage report settings, click Next.

   10. in the ready to update, click on install.

   11. in the course of a configuration, click Next.

   12. click on finish.

   For more information, read the messages in the thread titled I get the 737D error code when you try to install the update for SQL Server 2005 Service Pack 3 (KB970892) security. Any suggestions or should I not worry about installing this?

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/40db346c-6439-4484-9589-c78b326f5056/

  Check if it works for you. Post back and we do know.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• I get error message 0x7c919af2 sychost.exe 0x00000010

  Message: I have windows professional XP and SP3 also internet exploror 8 installed but whenever I try to download the fix it Center Online I get the error message unhandled exception has occurred in the creation of the specified web proxy error in the "proxy system.net/default ' configuration section ' advice on how to deal with this would be appreciated also at the top of the boot from my computer , I get error message 0x7c919af2 sychost.exe 0x00000010 any advice on this would be also greatly appreciated

  Why don't you send the error message that is accurate and complete to see you?

  Here is a folk remedy for this situation if this is what you see (or similar looking) of svchost.exe:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• Always impossible to install updates to security KB2596871 and KB2598041 (2007 Microsoft Office Suites), get error message 0 x 80070658

  I said not able to install security updates KB2596871 and KB2598041 (in Microsoft Office 2007 Suites) for nearly two weeks on my machine, get error message 0 x 80070658.  I saw no solutions to this problem on my machine (running XP Pro x 64), and tried to launch Microsoft Fix It to solve this problem.  What is

  Thanks for any help!

  Walt

  Hi Gekko,

  1 have you made changes to your computer recently?

  2 are you facing this problem with all Windows updates?

  3 have. what Microsoft Fix - it you tried to solve the problem?

  I suggest you to follow the steps and check if it helps.

  Method 1: Perform a clean boot, and then check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state from the above link.

  Method 2: Follow the link and run Microsoft Fix - it, and then check if it helps.

  Diagnose and automatically fix common problems with Windows Update

  Method 3: Repair the installation of Microsoft Office 2007 and check if it helps.

  (a) go to Start.

  (b) click on Control Panel and click on Add / Remove Programs.

  (c) select 2007 Microsoft Office and click change.

  (d) click on repair.

  Method 4: Install manually updates, then check if it helps.

  To install updates manually by following the steps mentioned below.

  (a) go to http://www.microsoft.com/download/en/default.aspx

  (b) research updates using the KB number for the update.

  (c) download and install it.