HP Pavilion dv7-6141eo with BSOD after installing IE10 or IE11

Similar Questions

• Problem on HP Pavilion dv7-6c90el with Windows 8 Pro x 64 on video card

  Good evening

  I just finished installing Windows 8 x 64 Win7 Pro, I could find all the drivers for my laptop, but I have problems with the video card settings.

  My laptop is a HP Pavilion dv7-6c90el with two graphics cards, one managed by the processor, because it seems to do, and the other is normally installed on the PC.

  The cards are read by Windows as:

  Unit 1: Intel HD Graphics 3000
  Unit 2: AMD Radeon HD 6700 m Series (Microsoft Corporation - WDDM v1.20)

  the problem lies in the fact that the device must be a supported per second, or disabled, as it will not be. AMD video card must be set to 1 and the intel 2. If I go to the "Device Manager" to disable the card intel Windows, it works as if he was absent any video card, also installed driver is not correct because the card is an AMD Radeon HD7690M XT, the problem is that even if I uninstall this driver then always comes back. I also tried to download AMD Catalyst in the latest version, but can't find the card. It's as if the windows are imposed only use the unit 1, which, however, I can not disable the BIOS, because there is no voice. I note that Windows 7 had no problem.

  I ask you to help me because I need the video card for my work performance.

  Fixed the link - please try again

• No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

  No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

  Thank you. This site help me solve my problem.

  http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

  Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
  Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
  When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

  By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
  -

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88006EFF443
  BCP3: FFFFF88003399D68
  BCP4: FFFFF880033995C0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031212-28672-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  
  -
  Can someone give me advice on how to solve and prevent this problem?

  
  Thank you

  you have the HP-tools installed?
  They often conflict with VMware.
  Try disabling the startup of the HP-tools

• Pavilion p256ur: problems with Wifi after waking up (only)

  I have a problem with my new laptop Pavilion p256ur. After he wakes up (only) the wifi (Broadcom BCM 43142) adapter does not. turned on in device management, it can not find any network. WiFi button (in the system settings menu and status bar) don't respond - it seems that the wifi is turned off. I try to:

  1 power off and power on this card in Device Manager

  2. turn off power off (to save energy) option in the settings of the adapter

  3 (default) old uninstal and install the most recent drivers

  4. install the latest driver for chipset

  5 control wlansvc service-, she strives to after wake up

  but his do not solve the problem.

  If I try to reinstall the drivers wifi after last stride upward of his works, but until the next morning to the top.

  In an event list management device devices there is a message:

  Bcmwl64.inf_amd64_0f3430bbd776c163\bcmwl64.inf installation driver for device with ID PCI\VEN_14E4 & DEV_4365 & REV_01\0000E2FFFFCDD85D00 & SUBSYS_2230103C, supplemented by the following condition: 0x0.

  After the system restart wifi works correctly, so if I want to use the wlan I must not sleep notebok. but restart it every time (or reinstall the drivers) is not comfortably. can you help me please?

  Hi @Medvejo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15-p256ur HP Pavilion Notebook and Wifi problems after wake up. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button. Figure: 13 choose what the power buttons. -Uncheck allow the computer to turn off this device to save power under the management of the power supply of the wireless adapter.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Help with Bluetooth after installing new HARD drive

  The hard drive failed on my laptop HP Pavilion dm4 3099se Beats Edition son. I replaced the hard drive, installed and activated Windows 7 64 bit (using the key supplied with the notebook windows). I used an oem Win7 disc, not the recovery disk.  Then I installed the drivers needed to make it work again. But I can't get the Bluetooth works, even if the wifi works. Use the Intel ProSet Wifi driver but the Intel ProSet Bluetooth driver returns an error when it is installed... and Bluetooth does not appear in Device Manager.

  I installed the ProSet software also. It is also an error "can not properly installed. I have not installed the HP software (which I hope it is not necessary).

  Is there than a bluetooth radios category in Device Manager?

  If so, then the generic microsoft drivers have been installed.

  Otherwise, the device is not enabled and is not being picked up by Windows.

  If you have not installed the software of HP connection manager, and who controlled the bluetooth when you reinstalled the hard drive, you need to install this software, turn on the BT using this software and go from there.

  On some HP business notebooks computers where the wizard wireless HP (predecessor to the HP Connection Manager software) controlling the wireless and bluetooth at the same time and no device showing in Windows when I reinstalled the operating system, which has happened to me.

  After installing the Wireless Assistant software, the two aircraft were then visible and I was able to install the drivers.

• Card NVIDIA of Pavilion Dv7 no longer works after warranty repair

  In February, I sent my Pavilion Dv7 (product # A5F93AV, running Windows 7 with NVIDIA GeForce GT 650 M graphics and more onboard Intel(r) HD Graphics 4000) for warranty repairs because he had lost the capacity of the batteries.  While there, according to the Scriptures, HP replaced the motherboard, the antenna wireless (twice) and the bottom of the case.  I received it by FedEx last Thursday, and superficially, everything works well.

  However, over the weekend, I loaded one of my most games intensive graphics (Guild Wars 2) and immediately noticed that the video performance was degraded. FPS fell less than 10, when before repair, the game went very well.  After some digging and run Open Hardware Monitor, looks like maybe running has not been reinstated to the GPU when the motherboard has been replaced and the game (and everything else) are using integrated computer graphics.  The monitor indicates that GPU temperature is constantly 0 degrees, with 0,0%, memory controller GPU load 0,0-0,0% video engine GPU GPU.  The GPU memory runs at a constant 2.8%

  Because it's my first machine, I really prefer is not to return to Texas for another 2-3 weeks.  Is that what I would be able to visually check myself and potentially connect myself without welding? If so, where I would look internally to do? or what should I take to my local repair shop to repair?

  Hi Ja_Q,

  Please contact our technical support at the 800-474-6836. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  They will help you.

  Thank you.

• Many BSOD after installing Samsung SSD 840 pro in ThinkPad Lenovo R60

  Have an old Lenovo ThinkPad R60 with screen SD that I won't. After installing the Samsung SSD Pro 840 the BSOD started coming, now every week, the last one on today. I don't see the option to download the dump anywhere file, so I enclose a picture with - maybe - some info.

  Can anyone help?

  Thank you

  okinchi

  

  Not at all surprising that involved C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT. Pilot of the SYS Symantec event library.  I remove it and use MSE in its place

  Symantec is a common cause of BSOD.

  
  
  I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• Problems with HP laptop Pavilion dv7-5004tx with the sound and video is this laptop being recalled?

  Hello I desperately need help.

  I have a laptop HP Pavilion dv7-5004tx, which is about a month.

  It's a really highy specced machine, 8 GB mem 1 GB card video etc.

  The problem is that when it video or audio playe he stutter along. I sent to hp about this problem and they do not come back to me? It is currently running windows 7 64 bit home edition.

  The model number does not exist when I search the site of HP?

  I noticed on some laptop computer review sites that it was be recalled, but it was the only information I could get. No specefics.

  I would really appreciate help from anyone out there? It seems as if HP tries to hidden it? There is no information about this laptop on any one of these sites (that I could find) and model number doesent exist on their site either.

  I think I have found a solution to my stuttering audio and video playback. I disabled the HP 3d drivegaurd software and so far it seems fine. After a search in any of the HP forums support I discovered a number of people have had similar problems with various portable computers HP.

  The solution seems to be to disable the car care software? HP aware of this and they do nothing to solve the problems with the drivegaurd software?

• the upgrade of my hard drive on my pavilion dv7 4280us.with SSD

  Upgrade to ssd drive using my recovery disc to install windows 7 it to load any disc 5 restarts to the start SCREEN of the HP LOGO screen and it doesn't recognize the OCZ VERTEX 4 DRIVE I install.

  My PC IS Pavilion dv7 4280us.

  Hello:

  At less than your SSD is the same size or larger than the mechanical drive, that you have replaced, the recovery disks will more than likely working.

  An alternative to the installation of W7 (only if you can read the full product key 25 character), is to do this:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• PC laptop Pavilion 15: freezing boot screen after installing Visual Studio 2015

  Hi all

  I have a problem on my laptop which is the startup screen freezing after installing Hyper-V on Windows Pro 8.1. Actully I need because it is used by Visual Studio 2015 do Andriod device emulator work

  After a search internet I found that this problem is caused by the driver Ralink Bluetooth and common

  I'm also thinking that I can boot windows successfully when I disable virtualization BIOS, so I logged on windows and I have tried a few solutions

  1. Disable Bluetooth device-> does not

  2 - Install the latest Ralink driver-> does not

  3. Remove VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00-> work but the returned key after that restart so I have to delete this key, everytime I open windows, and more that's a problem with virtual switches on Hyper-V

  Any solution permanent please?

  Hello

  Which driver Ralink, have you tried?

  I discovered Mediatek drivers which are no longer updated.

  Not sure if that helps in your case with Visual Studio.

  Here is the link:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71572.exe

• Satellite P300 - 1GI (PSPCCE) what happens with Vista after installing Win 7?

  Hello

  I intend to install windows 7 on my laptop, but want to know what is happening with my windows Vista, I'm running. I already made the recovery of the DVD but are they enough reinstal windows Vista after installing windows 7? or wat can I do so that this is possible?

  (I'm sorry for my bad English, I am from the Netherlands)

  Thank you
  Futience

  Hello

  The recovery disk allows you to reinstall Vista and all the Toshiba drivers and tools.
  Don t be afraid to install Win 7.
  If something goes wrong, you will be able to retrieve the laptop using the recovery disk. This will outline the laptop back to factory settings

  See you soon

• BSOD after installing the update of Norton on HPg7

  Laptop has been random and very frequent BSOD after an automatic update of Norton. Tried everything but that remove Norton stopped the problem. Deleted Norton several months ago without even a recurrence of the problem therefore reasonably certain that the cause was the Norton. Myy question is what anti-virus program is known to work reliably on HP g7? Currently to have not installed because I don't know wht will run.

  Hello

  Fewer hogging resources & a pretty decent anti-virus software which can only be invoked:
  Windows 7 & Vista: http://www.microsoft.com/security/pc-security/microsoft-security-essentials.aspx

  Windows 8: http://www.microsoft.com/security/pc-security/windows-defender.aspx

  Kind regards

• Problem with wsconfig after installing APSB07-02

  After installing the patches on APSB07-02
  I get this message?
  "Servers JRun (s) found on host 127.0.0.1 should be upgraded to use this version of the web server configuration tool."
  
  It is an own CF MX 7.02 in multi server, jrun update 6 installation, all the patches of jrun since updater 6
  
  TIA

  I found the problem, it is with the 62070_64614.jar hotfix

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=f9db1285
  JRun 4 Updater 6: fix for remote transactions

  Add each hotfix one at a time and it broke all.