Loss of wireless signal after installing Windows Vista

Similar Questions

• After installing Windows Vista, upgrades of office is now only 2 thirds of the screen, with one third black.

  Original title: April 16 to restart my computer after installing Windows Vista upgrades, my office is now only 2 thirds of the screen, with the third other black

  The whole office is there, but it is located in the Center, if the screen, with black bands at the top and bottom. By clicking full screen on the top right has no effect.

  Hi Jeremy,.

  Thanks a lot for your help. You're right, I should have said no upgrades and updates.
  There were a total of 10 updates:
  4 a security updates for Vista,
  1 security update for the Microsoft 2010 information access path,
  1 day of cumulative security for IE9.
  1 windows Live essential 2011
  1 definition update Windows Defender (KB915597)
  1 "" for Office 2010 "
  1 April 2013 malware tool
  I uninstalled Windows Live Essentials. I felt that I should not uninstall the updates of security, and the Defender update can not be uninstalled. It made no difference.
  I also checked the graphics card and told me that I had the latest version of the software.
  Then I checked the configuration of the monitor and graphics card configuration and found I could set the configuration to full frame. I did it and now all is well again.
  How and why the full frame disappeared April 16 remains a mystery.
  Thank you very much for your information without your help I would have been unable to delve deeply into the system. I learned a lot.

• my laptop is messed up after installing Windows Vista Service Pack 2

  My internet does not work and a message came up saying "internet explore has stopped working, there is a problem, windows will let you know if there is a solution" a box then came advising me to install Windows Vista Service Pack 2 and I did and now my laptop is messed up. After that I connected, a black screen appears then I found a solution in another forum and able to-> explorer.exe task manager and a something regedit and once my computer has restarted after it is a message saying "Windows has encountered a critical problem and will restart automatically in a minute." and internet does more either.
  Help!

  Hi, somehow I managed to fix my laptop using other answers I found on the forums and they were based on what you sent me here. I now have another problem with my laptop on internet access and an error message appears on my firewall is OK, but my University has a firewall up, so I think I need to go see them on this subject. Thanks for your help, thank you very much

• Problems installing HP Deskjet F380 printer after installing Windows Vista Service Pack 2

  OUR SYSTEM: Vista Home PREMIUM "Service PACK 1, 32 - bit, WE installed Service Pack 2, after that, we try to download & install" HP Deskjet F 380 all-in-ONE printer, BUT could not because the installation not completed & failed.

  Original title: having the problem after installing Service Pack 2

  We recovered our system to 'Out of BOX STATE' MEANS that WE BECAME NEW SERVICE PACK 1, WE SUCCEED to INSTALL OUR HP Deskjet F 380 & work properly, YESTERDAY we RECEIVED THIS YEAR IMPORTANT UPDATE IS AVAILABLE THAT IS "Service Pack 2 (KB 948465).

  Please notify can DOWNLOAD us & INSTALL SERVICE PACK 2. WITHOUT OUR INSTALLATION OF THE

  HP Deskjet F 380.

  YOUR ADVICE WILL BE VERY MUCH APPRECIATED

  Hi man chic,

  1. This only happens when you try to install the printer HP or with other programs?

  Step 1:

  Before you install Windows Vista SP2, uninstall completely printing software.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  After installing SP2, try to install the latest version of the drivers available for the printer and the printer and check if it helps.

  Links of HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=14481&LC=en&DLC=en&CC=US&OS=2093&Rule=13237&Product=1128296&sw_lang=

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound after installing Windows Vista SP2

  Vista service pack 2 and the loss of its

  Windows vista 32 bit
  I installed vista service pack 2 update and lost sound, I restored my computer to service pack 2 and sound istalling pre was there. I have re-installed now update sevice pack 2 and its missing again. It's the same with service pack 1 and I had to restore my computer to factory settings to retrieve the sound. I really don't want to have to do it again.
  I tried the microsoft fix that says everything is fine. I've done all the things suggested on troubleshooting audio from vista - still no sound. My internet explore keeps reloading when I don't have service pack 2 installed.
  What can I do to fix this?

  Like Nettie63, after SP2 has been installed, my sound on the left and the utility 'fix it' said everything of fine.  I tried the fix above with the research of STacSV64.exe that by pasting into the search bar.  However, he said that there was no file so I couldn't just double-click on it.

  What do you recommend?   Thank you very much.

  =====================================
  Have you tried all the suggestions in the following articles:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  (948491) how to troubleshoot sound
  problems that you experience after having
  install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481/

  (948465) information about Service Pack 2
  for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• After installing Windows Vista SP2 will bluescreen message updated changes failed and recovery

  Original title: start windows vista to the top of the page. (URGENT)

  My windows vista computer said it would install an update for the with a window pack 2 or something and it says installation failed, and now it returns changes. The screen and the message was on my laptop for hours. After the first hour, I decided to turn off main power switch immediately because it was taking too long and when I turned it back on. It is returned to the blue screen with the message update failed and their changes in recovery. Then what should I do? I want to continue with my laptop again and he has never done this before. Please help as soon as POSSIBLE. Antonio

  Hi Antonio,.

  You can check out the following link and try the suggested steps to resolve the problem installing Vista SP
  update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358/en-us

  Also see the KB article and check:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

• Computer HP laptop is not picking up good wireless signal after downgrading windows 8.1 for windows 7

  So far, I had a hell of a trip to the scene that I have (I managed to get windows 7 booted up and installed etc and then had to download drivers for a bunch of stuff that was absent because of the falling out between W7 and W8) but I need serious help/help - particularly nearby wireless network card drivers , but also in other areas, too.

  In short, the problem I have is that I had to download an ASUS 802.11n network adapter driver just to get my wireless works... and now it is not picking up signal unless the laptop is basically right next to the router.

  The router works fine - it's all new Virgin Media and I pick up the signal 5 houses down on my iphone.

  I guess the question I seek an answer to is if because the Windows 8.1 will no longer work and I had to install a * beep * ty Asus driver temporarily, can someone find me a suitable adapter for the following:

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  Oh my laptop is a HP pavilion 17 by the way - and Yes, I used this site to get adapters but none seem compatible.

  After spending some time looking around more closely, I found a driver that solved my problem:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3DswItem%253Dob_133353_1&javax.portlet.tpst=bd9b6997fbc7fc515f4cf4626f5c8d01&ac.admitted=1411428691952.876444892.199480143

• Pavilian dv6 - 6 c 13nr: loss of controller network after installing Windows 7

  My hard drive has failed, and when I replaced it, I did a new install of Microsoft Windows 7 Professional.  Work of connection't wireless (he did) I know that I need to put the correct drivers back to, but I don't know what network contraoller I; any ideas or suggestions?

  Hello:

  According to the list of parts for your laptop, it comes with the Realtek 8188CE wireless network adapter.

  This would be the link to the driver you need for this model of the wlan card.

  This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

  File name: sp57049.exe

• Aspire 5050 wireless problems after installing Windows 8.1

  Hi all

  While I know that ACER does not support the Aspire 5050 running windows 8.1, I wondering if anyone of you tech people out there could help me please.

  I have 3 GB of RAM installed and decided to run Windows 8.1 system is very smooth and fast, however, I wireless and no matter what I try, I tried endlesly for drivers to get a WiFi connection but nothing is done and would not go back to a previous Windows flavor.

  For some reason, my Wifi connection light is permanantly on also. I tried older drivers but cannot solve the problem of no wireless conectivity rendered my laptop useless in its curret for.

  If anyoe could help, I would always in your debt.

  Thank you for the research

  You can consider a nano USB wireless to work around the problem. They don't cost much and are tiny. Amazon has a cargo of choice that operate with Win8/8.1

  Jack E/NJ

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• New just installed Windows Vista, unable to connect to wireless networks

  So a few months ago my laptop (HP Pavilion dv6) fell from my bed and the hard drive was messed up, so I'm a computer geek friend to replace my hard drive and put a new operating system on it, he had no activation key. In any case, after I came back it was working fine and I was able to use the internet by connecting to public networks, but every time I would connect to my computer it asked me to activate it. And finally I got so bored with being bugged that I decided to buy a new product key, so that he'd stop bugging me. So I bought a new Windows Vista Home premium operating system and when I received it in the mail, I installed correctly and put in the product key and active it and all that much good but whenever I try to connect to the internet that it says "Windows cannot find wireless networks" and when I click on "Diagnose this problem" he says "this computer does not have an install_ adapter of» configured wireless network. and then it gives me options troubleshooting that brings me at all because most of them consist in some way to update my drivers online, but I can't online my laptop to update! and all the other solutions are just confused. Is there a reason why my "driver" would stop working AFTER you install Windows Vista? Or is there some way I can uninstall the operating system and just use the one I had before? Help please!

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• After you install Windows Vista, the maximum capacity of the hard disk reduced 80.0 GB to 3 GB

  Original title: reinstallment recent Windows vista has me to the maximum capacity of my hard disk (80.0 gb) why? __

  I recentlyreinstalled my windows vista, everything seemed to look and will work perfectly, so I decided to see how much space was left on the hard drive. My surpise there was only 3 GB of 80.0 gbhard drive. Now I'm sure that you would agree wiyh me and say that there is something wrong when installing on if so what can I do about it? You, I noticed there are some files like programs program then theres (86) below I see only in a few different places, as well as many files sent a text message if they are from my old program as if they never got deleted or formatted.

  Thanks for listening

  Hello

  ·        Did you do a clean install of Windows Vista without formatting?

  ·        How many letters pilot are there on the system, for example C:\, D:\?

  ·        The number of records your C:\ drive?

  Open C:\ drive and select all the files that are present and check what size is (of all files). Let us know the size.

  If you did a clean installation without formatting then, it may be a folder named windows.old. If you have the folder on the system, then follow the steps mentioned in the article below.

  How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vista

  http://support.Microsoft.com/kb/930527

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New hard drive try to install Windows vista but it keep suspended after 60% and collapsed them

  New hard drive try to install Windows vista, but it keep suspended after 60% collapsed I tried a few time every time I had to wait for 5 hours, but the same thing happen again and again can help you pleaaaaaaaaaaaaase

  Monastir,

  What happens when it stops it is have a Sata driver. It is on the drivers cd you received with your computer. You can also start the computer and press F2 to enter the bios. From there down to Configuration system - SATA Operation and change this to ATA. It is located to AHCI. Save the changes and restart the installation. Once you have loaded Windows and drivers installed, you will need to go back to AHCI.

  Dell-Jesse