I get the blue screen after unplugging the USB device

Similar Questions

• I get a blue screen after installing windows7

  I have intermittent blue screen of death after installing windows7 home premium on Pavilion m9040n. Can anyone help?

  It is indeed a clean install of windows 7. Thanks for the reply, I solved the problem. The problem is I have a Hauppauge winTV TV tuner card is installed and cela mucks the other pilots on this installation. Everything went well after I got rid of the TV card. It seems that hauppage isn't a suitable driver for their card and windows 7 install their WDM driver for him and it does not. When I try to use the TV card and not a few seconds later, I get a blue screen of death and fans try to work overtime for an unknown reason.

• How to get the USB device in the list in the resource name field VISA VISA Open VI

  I followed the tutorial below to connect with my camera using the USB port. But I don't have the name of the USB port able & Automation Explorer list devices. How to get it? Can anyone suggest something?

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  Hi kimhyun,

  I tried this. But managed. I used the USB as my sugesstion to device.my USB is that you unplug your device at any point of your work. Check that the device is properly connected. IF your system has recognized your device, you can view the device in Control Panel > Device Manager > then open your particular device from the list of the connected device then details > description of the system > hardware ID > then you can find here the code from your provider.

  Try this. I think that your device is connected to loosen. What USB device you are using? Also, you must install THE DRIVER FOR YOUR USB DEVICE.

  Good luck

• Blue screen after plugging of USB 3.0 devices.

  I have a problem with my USB 3.0 port. I tried to plug a USB 3.0 hard drive in my 3.0 port and every time I do it the blue screen of death (such as joint below) rises. I plugged a different hard drive USB 3.0 in that port with the same result. I note that peripheral USB 2.0 are causing this problem, and that it do not connect any device (including this hard drive) on my other USB port (which is 2.0).

  I tried to update the driver software for all my USB drivers, but no updates have been found.

  Any help on the matter would be highly appreciated :)

  

  Thank you!

  The two attached DMP files are error checking SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) .

  A system thread threw an exception that the error handler did not.

  Usual causes are a bug in a device driver.

  If we take a look at the call stack:

  0: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '089606 a 0 00000000' 00f8009e: fffff8a0 '0378ecc2 00000000' 0000000f 00000000 00000000' fffffa80' 041afe80: rusb3xhc + 0x1c2dd
  fffff880 '089606-8 fffff8a0' 0378ecc2: 00000000' 0000000f 00000000 00000000' fffffa80 '041afe80 fffff880' 0777af7b: 0xf8009e
  "fffff880' 089606b 0 00000000' 0000000f: 00000000 ' fffffa80 00000000 '041afe80 fffff880' 0777af7b fffffa80 ' 041afe80: 0xfffff8a0'0378ecc2
  fffff880' 089606b 8 00000000 00000000': fffffa80'041afe80 fffff880 '0777af7b fffffa80' 041afe80 00000000' 00000000: 0xf

  FAILURE_BUCKET_ID: X64_0x7E_rusb3xhc + 1c2dd

  We see mention of rusb3xhc.sys which is the Renesas Electronics Corporation USB 3.0 Host controller driver. Have you checked the support of Samsung & site drivers to ensure this driver is up to date? Yours is dated 2011:

  0: kd > lmvm rusb3xhc
  start end module name
  fffff880 '0775f000 fffff880' rusb3xhc T (no symbol) a 0779, 000
  Loaded symbol image file: rusb3xhc.sys
  Image path: \SystemRoot\system32\DRIVERS\rusb3xhc.sys
  Image name: rusb3xhc.sys
  Timestamp: Thu Sep 14 21:15 2011 (4E715194)

  If you're sure it's up-to-date, it is possible, another device driver is in conflict and bringing to the fault, so here are my recommendations:

  1. remove and replace AVG with temporary Microsoft Security Essentials for troubleshooting purposes:

  -AVG removal tool http://www.Avg.com/us-en/utilities

  MSE - http://windows.microsoft.com/en-us/windows/security-essentials-download

  2 in your list of drivers loaded, dtsoftbus01.sys figure who is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

  Kind regards

  Patrick

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph

• Blue screen after installing security update KB2419640

  After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore.  Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.

  TIA

  See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• game problem: blue screen after 10 min

  Hi all

  my system is the 3000 N200 0769 - BDG (T5250, Intel X 3100) with 4 GB of RAM and Windows XP Professional. I know that this laptop is not designed for games, but it should not crash, if I want to play something.
  So far, I tried HL2 and Trackmania Nations Forever. Both games run under low or good enough way of details, but I get a blue screen after a few minutes.
  I installed the latest graphics drivers from Intel and all my other drivers are up to date. BIOS version: 68ET26WW
  I have not yet met problems with other programs.

  Thanks for help

  
  

• blue screen after computer mode alarm watch

  Hello, I get a blue screen after waking up from my computer Windows 7 sleep mode.  The message isblue problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 locale ID: 1033 additional information about the problem: BCCode: 116 BCP1: FFFFFA80068823E0 BCP2: FFFFF880057E7394 BCP3: 0000000000000000 BCP4: 0000000000000002 OS Version: 6_1_7601 Service Pack: 1_0 product: 256_1.  Can anyone help?

  Hi Jaycee,

  Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.

  I suggest you remove all external devices except the keyboard and mouse and check if it helps.

   

   

  Please follow the methods and the update below us on the State of the question.

   

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.

  You can also download the last dump file so that we are able to help you. C:\windows\Minidump

   

  You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.

   

  If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:

   

  a. click Start, point to settingsand then click on Panel.

  b. double-click on System.

  c. click on the Advanced tab and then click settings under start-up and recovery.

  d. in the Write debugging information list, click on image partial memory (64 KB).

   

  For reference:

   

  Send a copy of your dump file in a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information

  http://support.Microsoft.com/kb/254649

   

   

  I hope that the information above helps you.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• the pc switches work and I get a blue screen when the driver is installed

  INSTALLATION DRIVER CAUSES BLUE SCREEN AND SWITCHING TO AND SUITE

  I have re-installed windows xp pro several times and everythong is going fine until I install the drivers from the disk. pc switches work and I get a blue screen with a RECOVERED FROM A GRAVE... message. I also have a xp(not professional) of windows disk, it works with the drivers, but the pc doesn't seem to work as well. I want to run xp pro version, that's why I bought it. Help, please.

  It makes no difference, what version of Windows XP, you install, it will make no difference to his execution, or use. (with the exception of you want to join a domain)

  If your PC boot after installing winxp pro, visit your PC manufacturers site, or the site of the motherboard and to get the latest drivers for Windows XP a go from there

• Blue screen after the installation of the Radeon HD 3450 video card driver

  Original title: I get a blue screen on vista after installing the drivers for my radeon HD 3450 graphics card, windows 7 works very well

  Hi all, hoping someone can direct me towards a solution...

  Have a 2.8GHz Celeron RAM 2 GB machine, install videocard ATO Radeon HD 3450 AGP.

  Equipped with Windows Vista 32-bit, install ATI driver from the ATI site, all installs OK but on reboot, we get BSOD.

  HOWEVER, same machine, running Windows 7 Professional, all installs them and works fine! (it is the same driver ATI for Vista and 7).

  We tried a new installation of Vista, even tried Vista business and Enterprise editions. Same results.

  Latest system drivers and not BIOS updated avaialable. Vista installation had Enterprise with SP1 and enterprise with Service Pack 2 included.

  I have google, downloaded ATI drivers, reloaded OS and drivers, and little matter what we try Vista causes BSOD and 7 works very well!

  If we try the latest beta version of the ATI driver, he refuses to detect the card in Vista, everything works fine in Win 7.

  Any suggestions? Please? !!

  Hello

  What is the exact error message you get when the blue screen?
  Step 1:
  Try to start the computer in safe mode. Check out the following link.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  You can try to disable the video card. Follow the steps.
  (a) click Start.
  (b) in the Search tab, type devmgmt.msc and press to enter.
  Expand c) display adapter and right-click on the Radeon HD 3450 video card.
  (d) click on disable.
  (e) now, close the Device Manager window and restart the computer.
  (f) attempt to start the computer in normal mode.
  (g) go to control panel.
  (h) select programs, and then click programs and features.
  (i) select the package for the ATI Radeon HD in the list and uninstall it.
  (j) restart the computer.
  (k) to start the computer in normal mode.
  (l) go to the Device Manager.
  (m) right click on the graphics card.
  (n) to select Properties, and then click the driver tab.
  (o) now click on roll back driver and check with the question.
  
  You can also check out the following link to download and install the two packages from the link.
  
  If you are using Windows Vista 32-bit, see the link.
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-Vista32.aspx
  For Windows Vista 64-bit, see the link.
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-Vista64.aspx
  
  You can provide us the mini dump file. We can analyze the mini dumps if make you it available to the Skydive or other file sharing sites (such as Media Fire). If you have problems downloading the mini dumps copy
  for the office or in the Documents folder and download them from there.
  ZIP or download the content of the C:\Windows\minidump
  Use in parachute to download files and post photo/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• When I try to boot from the rescue disc I get a blue screen

  When Vista starts up, the first thing I see is a screen that lists resources conflicts w/pci bus controller... three or four conflicts on resources, I press F1 to continue, then the computer detects new hardware... 1 sm bus controller, but the computer can not drivers, peripheral pci, same thing, cannot find drivers... Manager of devices display problem with six cameras, sm bus controller, pci device, host ricoh 1394 controller, ethernet controller of broadcom 440-10/100, hyper graphics tunnel transport amd and via agp controller cpu. I thought to reinstall windows, since I can't find sm bus controller drivers, but when I boot from the rescue disc, after loading windows files, I get a blue screen.   desperately need help. sedonatom

  Hi sedonatom,

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  3. What is the error message true blue screen that you receive?

  I suggest you run chkdsk from the Windows Recovery Environment and verify if you are able to start correctly on the desktop.

  
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  one) to boot into the Windows recovery environment, you can follow this link:

  Repairs to the system of Windows recovery environment

  (b) to the Windows Recovery Environment command prompt, type the following command and then press enter on the keyboard:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Hope the helps of information.

• Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

  Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
  Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
  When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

  By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
  -

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88006EFF443
  BCP3: FFFFF88003399D68
  BCP4: FFFFF880033995C0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031212-28672-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  
  -
  Can someone give me advice on how to solve and prevent this problem?

  
  Thank you

  you have the HP-tools installed?
  They often conflict with VMware.
  Try disabling the startup of the HP-tools

• Satellite T110-121 - blue screen after the installation of recovery

  Hello everyone! My name is Melanie and I want to apologize for my English: I m french! I have big problems on my laptop, I will explain:

  I had to install windows yesteday and I used the partition recovery, all worked but the last seetings, my computer fixed: blue screen. I have it reboot and I can log in on windows, now Toshiba software run at the end of the installation: install wireless and bluetouth BUT this software always get it fixed my computer or my screen is frozen, or screen of blus.

  Then, I removed it from the startep of the software list and tried to install the drivers I found on the Toshiba site but for the wireless, I run the software add anything, and for the bluetooth it says error 2753: setupdiu.exe is not marked for installation.

  So I m really disappointed, could you have some tips to help me please? I thought reinstall windows, but I can't reach the recovery: whose touch is?

  I m looking forward getting help.

  My best,

  Mel.

  Hey,.

  I think that something goes wrong when installing recovery and thus you get a blue screen and can t install the WLAN software. The best option would be to run the recovery process.

  But why you can't reach t recovery more? I mean you can use HARD drive recovery as often as you like and you can start if you enter Windows Advanced Boot menu (press F8 before Windows starts) and choose fix my computer. Select Toshiba HDD recovery, then follow the instructions on the screen. Windows will be reinstalled with all drivers and tools.

  Check this box!