Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

Similar Questions

• I was somehow infected and after restarting the laptop, it goes to a white screen.

  Original title: Virus

  I have an old HP Pavilion 2008. I was somehow infected and after restarting the laptop, it goes to a white screen. Not even the HP logo lights up. I can't access installation even though I know which key press.

  I created a bootable windows DVD 7 and a USB port. I can not even boot from one of them. With the DVD, it sounds like it wants to read, but there is something else wrong.

  Any help would be greatly appreciated.

  If the HP logo comes and you can't access BIOS, the problem is more likely to be at a lower level. A failed HARD drive should not prevent you from access to the configuration.

  Several things can cause the logo appears at the top (I write from a HP Pavillion 2008). I've dealt with many laptops such as yours and have seen many causes. Faulty RAM memory is a. A problem with the video chip is another. In fact several kinds of tokens (two bridges, video..). A virus is more unlikely but not impossible (if he messed with your BIOS, it is possible).

  If you don't see movement in your DVD or HARD drive, something I'm leaning more towards the video chip. Especially if it's Nvidia or Radeon - it would be a miracle if you use an HP laptop of 9 years with a powerful video (so that there is time) without having had any problems with it until now (mine is Intel). They overheat easily.

  What I would do in your case:

  1. remove the battery and unplug the unit. Give it 10 minutes and see what happens. Small chance, it would be useful, but it's easier to test.

  2. If you are reluctant to remove anything yourself proceed to 4. Otherwise, open the case and look for a reset (might want to read in the manual how to do it), remove the internal battery.

  3 try to remove the first (try to run) then the other of your plates to RAM (assuming you have two). During the race, all the tests remove the drive HARD and DVD just to eliminate the possibility of interference. If you manage to get started and get the logo and enter BIOS start adding parts back one by one and you will find the faulty one.

  4. If it at a gas station. Now you can do anything, if you can not enter BIOS so it must be a hardware change.

• laptop HP pavilion 15-n236TU: blue screen

  Dear Sir.

  My pc restarts while working to im. Suddenly, a blue screen appears & says that your pc has run in to a problem he had to restart the pc. And futher said Driver IRQL not less or equal. (tcpip.sys). is very grateful for your kind attention.

  Thank you.

  Hi @kulasekara ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your issues of 15-n236tu HP Pavilion Notebook and to have with a BSOD IRQL Driver error NOT LESS or EQUAL of tcpip.sys on Windows 8.

  Usually BSOD, they are caused mainly by 3 antivirus firewall conflicts based on. Have you installed new software on the laptop?

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Please let me know how it goes.

  Thank you.

• PC laptop Pavilion 15: freezing boot screen after installing Visual Studio 2015

  Hi all

  I have a problem on my laptop which is the startup screen freezing after installing Hyper-V on Windows Pro 8.1. Actully I need because it is used by Visual Studio 2015 do Andriod device emulator work

  After a search internet I found that this problem is caused by the driver Ralink Bluetooth and common

  I'm also thinking that I can boot windows successfully when I disable virtualization BIOS, so I logged on windows and I have tried a few solutions

  1. Disable Bluetooth device-> does not

  2 - Install the latest Ralink driver-> does not

  3. Remove VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00-> work but the returned key after that restart so I have to delete this key, everytime I open windows, and more that's a problem with virtual switches on Hyper-V

  Any solution permanent please?

  Hello

  Which driver Ralink, have you tried?

  I discovered Mediatek drivers which are no longer updated.

  Not sure if that helps in your case with Visual Studio.

  Here is the link:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71572.exe

• Pavilion DV6 3055tx blue screen after RAM Upgraderei

  The product name and number: HP Pavilion dv6 3055tx

   

  Pre-installed RAM: 3 GB
  

  Operating system: Windows 7 Home Basic 64 Bit (90 days)

   

  Error message (if any): blue screen on startup of the BONE
  

  All changes to your system until the problem occurred: RAM upgrade

   

  In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...

   

  One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"

   

  Corsair 4 GB DDR3 RAM simplified eBay India

   

  After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.

   

  After this, I restarted my system

   

  When starting Windows came to loading blue screen suddenly comes and laptop restarting

   

  Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally

   

  I gave my chance for both, but the same blue screen.

   

  After that, I removed the two Rams and inserted as a single Corsair

   

  Same blue screen

   

  Then I open BIOS and it says 4096 MB installed memory

   

  After that, I inserted the 2 GB with it means Total two-channel 6 GB

   

  But again Blue Screen and BIOS saying 6144 MB

   

  What is the problem?

   

  Please help me solve the problem.

   

  The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.

   

  Thank you... Waiting for a good answer

  Hello:

  I can't find any specs on that you bought it from memory.

  Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

  You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

  You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

  You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dv6t-3000-RAM-upgrade/m-p/2492127#M17965

  I think you bought PC3-12800 memory and this is probably the high density - two bad things.

• Blue screen after installing the driver for windows phone 7

  Hi all

  I installed the new version of Zune. When I connect my Windows 7 phone (HTC Mozart) to my computer (Vista SP1), the driver will install automatically. After that, he tells me to restart. When I do this, and when windows starts again, theres a BSOD with the following message:
  Driver IRQL not less or equal
  This only happens when I installed the driver for my phone.
  Once windows restarts and gets me to error checking etc and after that, it tries to start Windows again go through the process of "update configuration". Naturally the updates are not properly configured, and it restarts and tries to restore changes. This pretty much goes in a loop forever, until I restart, run in safe mode.
  I have no idea why what is happening, and search on Google did not help so far. Any help would be appreciated.
  Thank you.
  Euler

  The minidump files show the recent errors are errors IRQL_NOT_LESS_OR_EQUAL (a) and the cause of the error is OA001Vid.sys.

  The OA001Ufd.sys also seems to be involved in the accident.

  These two drivers seem to be the drivers for the integrated webcam.

  What you might try is the next update for the webcam to the laptop:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R213648&SystemID=STUDIO1737&servicetag=&os=WLH&osl=en&deviceid=16027&devlib=0&typecnt=0&vercnt=4&catid=-1&impid=-1&formatcnt=0&libid=17&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=302206

• STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]

  As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• blue screen after installing the updated driver intel chipset

  I have y510 42q. After you install an update for driver chipset intel from windows update, I have blue screens while watching videos. What should I do?

  Install previous versuin or reinstall the latest version. Check as fresh versions of DirectX and video card drivers.

• Pavilion G6 1332el: black screen after installing drivers

  I installed Windows Home Premium x 64 on my HP Pavilion G6 1332el and everithing was very good.

  Downloaded all the drivers for this operating system on the HP Download Page and install them all. I never reboot after each driver installed, so I can not tell you witch cause car my problem.

  After all, I did a normal Shut Down.

  When I powered THE next day, after Windows Logo disapier, only black screen remains.

  I tried VGA output, but my laptop keyboard faield and I FN key on my USB keyboard.

  I'm here, can I di to solve my problem?

  Thank you!

  apashi

  I'm guessing that you have reinstalled Windows from a DVD, right?

  Your PC came with a version of HP OEM of Windows preinstalled, and it is the only version guaranteed to work on this unit.

  You should consider reinstalling using HP recovery media to operate again.  It's a set of DVD and a CD that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Pavilion dv7 Notebook PC - Windows Boot Manager does not allow me to restart the laptop

  HP Pavilion dv7 Notebook PC
  XH121UA #ABA
  Office home and Student 2007

  I turned on my laptop and got the following message is displayed:
  Windows Boot Manager
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.

  I had no problem before now with the computer. Yet once, this message has occurred during a turn on my laptop. I tried to restart the laptop, but it is not allowing me to restart. The laptop back to this message.

  I appreciate any help with this issue. I thank very you much for your time and knowledge.

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• I just bought a PC C50 toshiba laptop with windows 10. I would like to ask if someone can tell me if it is easy to remove the Windows OS 10 and restart the laptop with my windows disc 7.

  * Original title: delete windows 10

  Hi, I just bought a PC C50 toshiba laptop with windows 10. Is not not a geek, I would like to ask if someone can tell me

  If it is easy to remove 10 OS and restarting the laptop with my windows disc windows 7, the reason why I want to do is

  because I have aready have a desk top running 7, but it is to the top at the moment and could use the laptop backup

  You must ask your win-10 computer make this question

  They would have made drivers for this machine for win - 7

  If not then no.

  Your only option is to return it and ask for a unit that has win 7 drivers.

• Network printer stops working after restarting the laptop

  I have 2 PCs both running windows Vista. A PC is a desktop computer ACER with a printer connected to a USB Port (HP Photosmart C4480). The 2nd PC is an ACER laptop also on windows Vista. I have a network home and print away from the laptop. Problem is when I restart the laptop I can't print remotely and do are Add' the printer again. Print spooling is nec automatic and active. I have downloaded the latest drivers HP for the printer. Just a note to say that ACER laptop my son who works in XP does not have this problem and can print after a reboot.

  Hi GaryPolaris and thanks for the answer.

  What is the brand and model of your printer? Have you checked to see if the printer is compatible with Vista? You can check this in the Vista Compatibility Center located at this URL http://www.microsoft.com/windows/compatibility/ . Also, you can try installing the Vista drivers on the XP machine. If the manufacturer has released Vista drivers simply download and install the drivers on your XP machine.

  I hope this helps. Please post back and let us know if it did or did not solve your problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I deleted several accounts of users, but after that I have restart the laptop all user accounts have been restored?

  I deleted several user accounts and need to restart to changesw can take effect, but after that I have to restart the laptop then all user accounts have been restored?

  Hi GhettoBoy,

  How do you delete user accounts? Is it just C:\Dosument and settings users or accounts under the control panel? If you don't want to keep all these account data, you can try to delete the profile of click Start-> settings-> Control Panel-> system-> Advanced-> user profile and select the profile and remove. Also check under 'User accounts' in the control panel to remove the names of users.

  I hope this helps.

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  Go in Edition > Preferences > Performance and uncheck CPU graph use.