If I do a clean installation Windows 10 anniversary update...

Similar Questions

• HP Color LaserJet MFP M176 Pro: No printing on HP Color LaserJet MFP M176 Pro after update of Windows 10 anniversary update

  My HP Color LaserJet Pro MFP M176 does not print after update of Windows 10 anniversary update. I've updated two computers (HP Compaq Elite SFF 8300 and E6320 Dell), Hp with 2013 installed Office and Dell with Office 2010 installed. The printer is connected to my network. The latest "complete solution drivers' HP was installed before the upgrade. Printer does not printer-> Printtest properties, error notification appears and asks me if I want to troubleshoot the error. I can see the printjob in the spooler, but it is immediately deleted. Does not print any programs I've tried, with the exception of the notebook HP Print and Scan Doctor! When I troubleshoot with Windows printtroubleshooter, no problems found. Same thing with HP print and scan the doctor.

  I uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  On the Dell computer, I made a new clean install of Windows 10 Anniversery update, from a USB key. Office 2010 installed and 'full pilot solution again'. Same problem!

  On August 18, 2016, I found new drivers on Hp. new downloaded web pages "complete solution drivers still" uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  Among the many solutions, I tried turning the firewall. No help.

  I know that brother Corp has sent an email to their customers, there are big problems with their printers/drivers and the anniversary 10 Windows Update. Same problem with Hp printers/drivers?

  Someone who has a solution?

  Hello!

  Thanks for your suggestion of a solution!

  First of all, it fixed my problem of printing when I tried with a new user on both computers. Yet, I was a little confused that two updates and an installstion clean "updated anniversary" should lead to a curropted user profile!

  Then when I did what I always be with new computers/users, to the environment variables 'TMP' and 'TEMP' C:\Temp for the new user. Printing stops again. Extract a little more and found that users on C:\Temp needed to be 'total control '. 'Change' was not enough. Perhaps one of the new things in birthday update?

  In any case, there where the pleasure with your help!

• VN7 - 592G blue screen after installed Windows 10 anniversary update

  Hello

  This week I installed the last 10 updated Windows on my laptop VN7 - 592G (tried build 1511 upgrade and clean installation, too), however, I still have the Blue error screen. I can't use my laptop, or to do anything because of the Acer is not kept up-to-date of pilots.

  Of course, I installed the drivers of the last Acer of acer.com but Realtek Audio does not work so my computres crashes at startup.

  ==================================================

  Dump file: 080316-7609 - 01.dmp

  Crash time: 2016. 08 03. 0:18:11

  Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  Bug check code: 0x1000007e

  Parameter 1: ffffffff "c0000005

  Parameter 2: fffff80e'adc68a41

  Parameter 3: ffffb281'd19376a8

  Parameter 4: ffffb281'd1936ed0

  Caused by the driver: RTKVHD64.sys

  Caused by the address: RTKVHD64.sys + 48 has 41

  Description of the file: Realtek (r) High Definition Audio function driver

  Product name: Realtek (r) High Definition Audio function driver

  Company: Realtek Semiconductor Corp.

  File version: 6.0.1.7687 built by: WinDDK

  CPU: x 64

  Plant address: RTKVHD64.sys + 48 has 41

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\080316-7609-01.dmp

  Number of processors: 8

  Main version: 15

  Minor Version: 14393

  Size of the dump file: 411 988

  File dump: 2016. 08 03. 06:40:05

  ==================================================

  Hi all

  I'm sorry for the delay; first of all, I want to thank you all for your patience as we worked to solve this problem. Second, I have been informed that we had a new audio driver released for the VN7 - 592G, version 6.0.1.7910, and it is now available in the website of drivers and manuals.

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Cleaner installation (Windows 7 recovery discs)

  I use a pavilion laptop (dv7-3085dx) and I would like to do a clean install of windows 7.  After ordering HP recovery discs I booted from the dvd system recovery, reformatted my hard drive and reinstalled windows 7.  Then he asked me to put on the cd of driver and application recovery and method to install a ton of bloatware on my fresh system.  There is no option of autorun on the cd that allows you NOT to fill your computer full of useless * beep *.

  After Googling the problem I came up with two possible solutions:

  (1) install the cd drivers and complete applications, and then using a program such as pc-decrapifier

  (2) selectively install drivers useful and apps after install the clean by using a cd image program.

  I feel that programs such as "pc decrapifier" still leave bloatware remains in the registry and that installing selectively useful drivers and applications can be tricky.  Does anyone have tips for how should I proceed and what applications and drivers are essential or useful?

  TL; DR how can I reinstall windows 7 in order to avoid bloatware and have a fully functional computer?

  Thank you guys!

  SomeDude5 wrote:

  Just so I'm clear: do you recommend that I have download a windows7 cd image file, burn it to a cd and then do a clean install with a new disc?  There will be legal consequences for using this method?  Will I always have updates of Windows 7?  Is there something else I need to be aware of when installing from the windows 7 installation disc standard?  In addition, the link you sent me seems to be broken.  I am quite able to find ISO files, but you have another link that you would recommend?

  Thanks for your help

  1 Yes

  2. links on this page are to the Microsoft site, but I am not a lawyer

  3. Yes

  4, yes you have to load a driver Sata (Intel only) during installation, there is an option "Load driver" during the beginning of the installation of W7, if installation of W7 do not find a hard drive, start the installation again and load the Sata driver.

  There may be other drivers, you need to install once installation is complete, check for missing drivers Device Manager, if you can connect to the internet to do a windows update and see if it suggests and driver optional downloads.

  5. try this link, I would not trust other sources, the iso can be infected.

  http://WEBCACHE.googleusercontent.com/search?q=cache:http://www.mydigitallife.info/2010/04/28/download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-links/

  .

• Desktop Clean Installation Windows XP compatibility

  I tried to install the NeatDesk scanner today. A message appears saying that it is not compatible with Windows XP and if I don't get software compatible with the seller, my computer can be damaged, now or in the future. How is risky to move forward? From what I've read, the customer service is difficult to achieve and has long waits. But I want to do any damage to my computer.

  Could be better answered on the forums of NeatDesk. The forums are for products only HP. If you have an HP computer, you can find an answer on the computer HP desktop or laptop forums, but I am betting that NeatDesk will have the best response.

• Cannot install of Windows 10 anniversary update on MacBook Air

  Hi all

  When I run the Upgrade Wizard of Windows 10, he told me that I am currently running version 10586 and the latest version is 14393. (from August 03-2016). After I click 'Update Now' to start, I get the following message:

  10 of Windows does not run on this PC

  This is why 10 Windows cannot be installed:

  CPU: OK

  Memory: OK

  Disk space: OK

  ! Display: The display is not compatible with Windows 10. Check with the manufacturer for support.

  End of 2015 MacBook Air running Windows 10, no problem, the display runs the Intel® HD Graphics 600 driver and Control Panel, everything is OK.

  No clue as to what might happen?

  Thank you

  Pedro

  Updated the Intel driver from the Intel site and still the same, cannot continue the update of the anniversary. Hope that someone has any ideas on how to solve this problem. Thank you very much in advance.

• Windows 10 anniversary update broke my Acer Switch SW5-12 10

  I type on my laptop big because I can't get my convertible tablet, touchpad or a touchscreen to work. Not even a usb mouse moves without severe lag, as in 20 times on the mouse pad move your thumb on the screen. I downloaded and flashed all updates to the bios, calibrated the screen, restarted about 10 times (because it took about 6 times after previous Windows update for my touch screen works), and nothing has changed. Acer care center said that all my drivers are up to date. Given that a click on the screen shows several little circles in a vertical row and open 2 or 3 different windows for aps I never clicked on, it takes hours to do something that should have taken minutes. So no, Acer, drivers are not updated.

  I've seen the Acer note on another model, saw that they were working on touchpad problems. I hope they're working on a fix for this model, but it needs the touchscreen fixed as well. If someone figured out how to solve this problem, please help. I don't want to take my laptop grand on a different level.

  First, the last update (-4798) sets out a number of things, including a mouse jerky on my W3.

  Secondly, they are the trackballs computer USB Pocket that can work very well.

• Windows 10 anniversary + Boot Camp = Assembly is more Mac partition

  I have a MacBook Pro retina (end 2013) with Mac OS El Capitan, dual-boot with Windows with Boot Camp installed 10. Everything worked fine until I installed upgrading Windows 10 anniversary today. now Windows Monte is no longer the Mac partition. I reinstalled with success the latest Boot Camp drivers, but Windows still show me the Mac partition. (Starting in Mac OS works fine).

  Everyone knows about this problem? Anyone know of a solution or workaround?

  I wanted to offshore to see the cheers or boos... started Googling tonight and find that this Apple community and a Slashdot post in particular is disconcerting:

  https://Linux.Slashdot.org/story/16/08/03/1614223/Windows-10-anniversary-update-borks-dual-boot-partitions

  The report mentioned in the SlashDot is here:

  http://windowsreport.com/partition-disappears-Windows-10-anniversary-update/

  ... and he mentions a MiniTool Partition Wizard app. I'm looking on the site; the open air. I would try to download Windows and without committing to changes, driver changes, etc. he 'sees' the HFS partition +?

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• I will back up everything that I want to keep and do a custom (clean) installation for windows 7 Edition home premium.

  Amount of external hard disk space is required for installation files?   I have a 10 gig and a ceiling of 5 gig on my wireless devices, or am I better off buying the staples or office depot installation disc?

  Hello

  "do a custom (clean) installation for windows 7 home premium.

  You say you want to install Windows 7, NOT Vista.

  It is a better idea if you buy you the Windows 7 DVD and then install it from the media.

  You then save model the work of making a Bootable DVD from the download and you also then have a reliable way to reinstall Windows 7 and repair work on this, if you have the need to.

  Before purchasing Windows 7, make sure that your hardware and software will work properly with him.

  Take some time and these checks:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• I have an ISO of Windows 7 instsaller file. Can I use it to upgrade a machine as opposed to a CLEAN INSTALLATION of Vista?

  Upgrade Windows Vista to Windows 7

  I have an ISO of Windows 7 instsaller file. Can I use it to upgrade a machine as opposed to a CLEAN INSTALLATION of Vista? In other words, the Windows 7 ISO disc gives an option to upgrade only?

  Hello

  read this tutorial

  How to do a upgrade install Inplace of Vista to Windows 7

  http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.html

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Wipe the HD, do clean install Windows 7 - cannot detect HD during installation

  Hello

  So basically I have Toshiba Satellite L305-s5908 and I wiped the full HD (use to have Vista on the laptop), and yes I copied everything on a HD external backup.  My problem is when I'm clean installation of Windows 7, it gets to a point where it asks 'where to install Windows 7', and it does not show my HD.  Now I'm stuck.    What to do?  Here's what I tired...

  -J' looked for a driver for the HD, but Toshiba has not (at least I can't find it).  Other sites claim to have a 'pilot', but I'm afraid to download spyware or malicious software.

  -what I have to reformat my HD wiped & then install Windows 7?  If so, what are the steps?

  Any help to fix this would be greatly appreciated.

  Hi all

  I got my problem solved.

  With the help of another COMPUTER forum, I got my HD work and installation of Windows 7 made.  Long story short, I wiped my own HD (had Vista).  After the failure of it own, I discovered the 'C' was thought (via the command Diskpart) someone suggested I download and burn to a CD, a program called "GParted" (search with Bing).

  GParted is a free partition editor to graphically manage your disk partitions.

  With GParted you can resize, copy, and move partitions without data loss, so you can:

  • Grow or shrink your C: drive
  • Creating space for new operating systems
  • Attempt to rescue data from lost partitions

  After starting with GParted, he went to work. As my HD was clean it took 5 to 8 minutes to complete.  Once GParted has been done, I inserted the Windows 7 installation CD.  Finally when he got to the screen "where do you want to install Windows?" my HD showed.  Finally!   What a relief!   After an hour, my old laptop was completely installed Windows 7.   I'm so happy that this has been resolved.

• Deny access to files restored after Windows 7 clean installation of Vista

  I have an external hard drive on which I saved my windows backup files.  After you perform a clean installation of Windows 7 (in order to minimize any problems!) I restored my data files, but now I get the message "Access denied" when I try to open more (but not all the files), I spent at properties-security-advanced options to right click tab and tried to enable permissions, but it did not always work.

  I am logged on as administrator, and one of the strange things is I see four entries under the heading "power entities.  Also, when I downloaded and installed iTunes, it installed, but you try to start the program I got the message "access denied."  This happens with any of my other programs (can open the program, but not a file) and I just can't understand what can do.  Help, please!

  You must 'Take Ownership' if the files and folders. Type that in Windows 7 help... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive. We will ask for a driver

  Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive.  We will ask for a driver.

  I did will need you you will need to Prime boot in the BIOS and set to boot from it.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/