I got a KB2505189 of Windows Update 'important '.

Similar Questions

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• Cannot change 'Windows Update' - "Important updates"

  I had my Windows Update for updates but allows me to decide when to download and install the value.  This morning my computer downloaded, installed and rebooted without asking me.  I checked my settings and they are configured to automatically download, install and restart and I can not change the settings, they are grayed out.  I could go into regedit and change the settings here, but wonder why it happened and how I can access the setting of the control panel again.  I am logged in as administrator.  I am running Windows 7 Pro 64-bit.

  [Dupe of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/c600c8c8-bb99-4a2b-99ce-1d8b8c85d4fe] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HELP - after installing Windows "updates important' all of a sudden my software no longer works!

  I am a user of Final Draft 7 (writer) - not a computer expert.  I allowed the updates to be downloaded and installed, and suddenly my screenwriting software gives me an error message that says 'Windows has shut down to final draft' and if there is a solution, I will be notified, but then nothing happens.  I know I look stupid, but I don't have the time to become an expert on Windows.  I need my software to work with Windows to do my job!  Anyone know why this is happening and what I can do about it?  Help

  Hi pattitwalker,

  I would like to know the name of the Windows update that is causing the problem.

  Try to run the application in the clean boot state.

  Follow the instructions in the link below to put the computer in a clean boot state.

  http://support.Microsoft.com/kb/929135

  Put the computer to Normal mode after checking the issue.

  If this application does not work in the clean boot, we you need to do a system restore.

  Follow the instructions below to restore your computer to its previous state.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type System Restore in the Search box, and then click System Restore in the list of programs .  If you are prompted for an administrator password or a confirmation, type your password or click continue.
  2. In the System Restore dialog box, click choose a different restore point, and then click Next.
  3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. Click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Kind regards

  KarthiK TP

• I have 3 devices (obsolete drivers?). I read the help topic I got 3 errors in windows update

  I used uniblue freescan and suggested that my pilots have 3 devices that are outdated. (1) what was installed, was 6.0.6000.20080 for controllers realtek usb 2.0 card reader / universal serial bus. But he suggested that I update to 6.1.7600.30118

  (2) what was installed, was 7.6.0.108 for the atheros AR9281 wireless network adapter. But he suggested that I update to 7.7.0.449

  (3) what was installed has been 6.205.403.2008 for the realtek RTL8102E Family (NICs PCI-E Fast Ethernet NIC NDIS 6.0) But he suggested that I update to 6.243.1025.2010

  I also used the windows help and Support for details how to update the registry, and he also exclaims that I have a Windows update error: 8024001F and 8000FFFF and also 80070646 or 646

  I'm not savvy computer very, but if I show a procedure step by step details on how to repair or fix the problem. I'll certainly try to learn and understand how to accomplish this detailed information. I hope that I gave a lot of information that my problem may be or if he is in at all? Your help will be very appreciated. Thank you

  Given that you are willing to learn, to stop using the free scans of the internet, you will get your computer in trouble later. If your devices perform very well there is no reason to change drivers. However, if you feel a need for your devices performs better go to your computer manufacturer and check if updates are available. Also, forget not, everything simply because you change a driver does not mean your device will be more efficient. In most cases updated drivers will have little or no significant effect and can even run poorly. If you want to learn how to install a driver, download a driver, then follow the instructions, it is a fairly easy task. If you later want to restore the previous driver, it is also a fairly easy task and we can help you here.  Windows Update error 8024001F means you have lost your connection to the internet when checking for updates to fo, you can ignore it. Update Error 8000FFFF is a registry key, do not mess with the registry at this point, go here to fix it.     http://support.Microsoft.com/kb/946414 update error 80070646 is a registry key, go here to solve this http://windows.microsoft.com/en-gb/windows7/Windows-Update-error-80070646-or-646 I see you already know these fixes of your post. It is only by mistake that human beings humans learn how to do things, curiosity , and the desire.

• Windows updates 'Important'

  I get significant updates that I'm not sure that I need to install.  This week, I have updates for Suites in Microsoft Office 2007, Office Excel 2007, and Office Word 2007.  The only way I use one of them if I have a folder in My Documents, which opens in one of these programs.  Should I continue to download & install these updates or not & why?

  Q: when you run a manual check of updates [TEST NOW], are updated for Office 2007 offered and if so, you are able to install their security?
  R: no updates available after running a manual check

  Very well. Mark one or more of my previous posts as RESPONSE will officially close your thread.

  

• Windows Update is Important?

  I got a lot of windows update, but it did not affect my OS...

  Windows updates are not normally the user facing functionality. They keep the Windows files that manages the resources of your computer, updated and secure.

• Get error message iTunes had some missing files and must be reinstalled after Windows updates

  Original title: Windows Update 10/02/11; iPhone 4; iTunes no longer works

  I have connected my iPhone 4 on the USB port, it synced and then left the phone connected and current run iTunes when I went to bed.  When I woke up, the Welcome screen was carried out and, after login, I got the message that Windows updater had made some updates.  When I clicked on iTunes, I got an error message that iTunes had some missing files and must be reinstalled.  I tried to do a system restore to recover my iTunes library before the update.  System restore would not have worked either.

  Hi SethAaaron,

  It seems that the reboot might have corrupted the itunes.

  You can try to uninstall itunes completely and reinstall and check:

  Check out the link:

  You can view the following link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Also check out the link:

  No content appears in iTunes after to

  http://support.Apple.com/kb/TS1967

  "Some required files are missing" error when opening iTunes 7.5 or error-2093 when you open QuickTime Player 7.3

  http://support.Apple.com/kb/TA25074?viewlocale=en_US

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think, if this post can help solve your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update put my computer in "out of area" condition

  I have a brand new computer.  Dell Inspiron 1750 with Windows 7 Home Premium.

  After that I got a few weeks Windows Update popped up window.  He said I had 19 critical updates and I wanted to install.  I opted for the 'yes '.

  The program is run and then it says the computer needed to restart to complete the installation and I want to restart my computer now.  I opted for the 'yes '.

  Restart the computer and to my horror, everything I had done to the appearance of my top Office was gone!  He looked exactly as it did when I put on the computer.  My picture has disappeared, the pier was in its original position, all of the icons for the programs were gone from the dock and the taskbar!

  I did not go further... I went immediately to the restoration of the system, and thankfully it restored successfully!

  But now I'm afraid to always install updates.

  I contacted the support of Windows, but they said I would have to pay for more information and then they would not tell me how to pay support!

  I contacted Dell, but I talked to a technician for more than 40 minutes and it took 35 of them just for him to understand what the problem was!  It must have been in India.

  I contacted Staples where I bought the computer and immediately, they knew that the problem was something that Microsoft would have to answer.  So it took back me to alternate.  Accomplished nothing.

  Microsoft sent me here.  I pray so that someone knows what's going on and can help me because I was in tears and want to kill the support of Windows!

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update Gets an error

  Again, I got a notice for windows update, then it screw up the start. Got the 8001E2B995 error. Several times I had to restore, but this time I had to reboot several times to get the job of the computer. Everytimes I had to restore I had to reload my Mcaffe, it's a great pain...

  Hi nfondy,

  Thank you for using answers Forum.

  I'm not finding any reference to this error code.
  Can you post the exact error message you received?

  Have you been able to update since the system restore?
  If this isn't the case, you can download the update for manual installation if you can identify the article it references.

  You can check which updates are available by clicking Start and then typing "update."
  Right-click on the entry of the appears, and then click "Run as Administrator". You can request your password.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After replacing my HARD drive with a 1 software to, serverals collapsed at work, such as messenger, Windows Update, network (printers and computers cannot be seen).

  I use Windows Vista SP3, Intel core Duo, 1 TB HDD processor. I copied the two partation, I had (from old HARD drive). After that my msn, the network (only the local network, internet is ok), Update Windows... stoped working. I got a messenge for windows update in saying that the service is not running, but according to services.msc it still running. When I try to sign in to Messenger, it is said that the service is temporarily unavailable.

  How ould I do to fix?

  Kind regards

  Carlos sales Junior

  Hello

   
  How the printer is connected to the computer-wired or wireless?
  
  Method 1:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  Method 2:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Windows Update causes high CPU AND not let me install Windows 10

  Windows 7 update has several issues:

  1 Windows Update Service causes the CPU usage high - CPU usually works 50% or more with a single SVCHOST.exe running.  I click with the right button on the SVCHOST entry in Task Manager-processes and saw all the services that SVCHOST is still running.  One at a time, I stopped and restarted them.  Finally, when I stopped the Windows Update service, the cpu immediately fell to almost nothing.  I rebooted and tested several times, and each time, it was Windows Update service that was causing the high CPU.

  2. Windows 10 Upgrade Advisor says I could upgrade to Windows 10, and get the icon Windows 10 is in the toolbar.  But it has failed to install several times.  Now, after stopping and restarting the service of updating (and I checked, it is started), the window get Windows 10 rises, is empty and goes.

  3. I ran the Update Diagnostic and got 1 error:

  Windows Update error 0 x 80070003(2016-04-04-T-04_56_09P)

  the Details of the Diag Windows Update window said:

  RootCause: RC-DataStore

  Error code: 0 x 80070003

  4. I tried to launch the 'Fixit' for update, but it did nothing.

  5. I tried to update Windows Update WindowsUpdateAgent30 - x 64 .exe Agent,

  but it fails with this message:

  "Windows Update Agent Installer has met a fatal error"

  6. when I try to start Windows Update-check for updates, it displays the dialog box "check for Updates" and activity indicator green runs and runs and runs for more than 10 minutes but nothing happens.  And when I check the view update history, it shows no updates, even though I know that I've run a LOT of updates in recent years.

  7. I thought to reinstall Windows 7.  I went to download from Microsoft, and when repair installation it activated my key it says that it wasn't a retail version, so check with the supplier (in this case HP).  I checked with HP and they said that this machine was is no longer supported.

  8. on the way I've renamed the folder C:\Windows\SoftwareDistribution-Windows SDOLD, force it to create a new (probably why it does not find the old updates).  IT did not help.

  So it seems to me this machine is expandable to 10 Windows (it meets the specifications and the Advisor to update Windows-10 said yes and installed the toolbar).  But something is wrong, probably with Windows Updater, and now nothing will be update or upgrade.  And I can't get a new copy of Windows 7.

  So, any thoughts?  I'm out of ideas.

  All I can say is to ensure that you have the latest Net framework installed manually 4.6.1
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=49982

  And the most recent client update
  https://support.Microsoft.com/en-us/KB/3138612

  Also manually install it kb3136000

  https://support.Microsoft.com/en-us/KB/3136000

• Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  Trying to update my video player, I clicked on 'file' and then download it and I got was a full window of the computer language without option "run".

  To jscher2000 ~ I did what you said and it says "Media player could not be verified for use in Firefox. Proceed with caution. My husband told me to just delete, so I think I'll do it. Thanks for your help! Nice day.

• Restart your computer to finish installing important updates keep appearing. Windows Update (Windows 7)

  Previously I installed updates for windows 7, after installing the updates, I restart my computer but it still seems the message to restart your computer to finish installing important updates. Help solve this problem...

  Original title: Windows Update (Windows 7)

  Hello

  Step 1: Determine if the update has been installed

  Review the installation history

  a. to review the installation history, follow these steps:

  b. Click Start, point to all programs and then click Windows Update or Microsoft Update.

  c. on the Web site, click on view update history.

  d. find the latest entry for the specific update.

  (e) Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

  Step 2: Run the Windows update utility for troubleshooting.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot change how the important windows updates are installed 7

  I can't change the settings of "Windows Update".  I don't want Windows to automatically restart my system so I put it to 'Application prior to installation', but this morning it is automatically installed and rebooted.  Now, I don't have the ability to change the parameters, as if I'm not administrator.  The option is there, but not highlighted for to change me.

  Hey CGEnterprise,

  To the configurable options for automatic updates, follow these steps.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  Step 1:

  1. go to start and type regedit.exe.

  2. go to this location:

  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU

  3. in the right pane, delete the two values AUOptions and NoAutoUpdate

  4. go to that location:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\WindowsUpdate

  5. in the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor

   

  Notes:

  o you must have administrative privileges to perform these tasks.

  o Group Policy Editor is only available in the professional edition, full and Windows 7 Enterprise edition. You will not have the Publisher of local group policy available in Windows 7 Starter and Home Premium editions.

  Step 2:

   

  1. Click Start, type gpedit.msc and press ENTER.

  2. navigate to the following location:

  Computer configuration > administrative templates > Windows components > Windows Update

  3 in the right pane, double-click Configure automatic updates and set it to not configured

  4. then, go to this location:

  User configuration > administrative templates > Windows components > Windows Update

  5. in the right pane, set to remove access to all Windows Update features on not configured

  For more information:

   

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.