I got error after deploying my application on production, it gives me error column name is not found in any of data

Similar Questions

• Startup error: "this application has failed to start because google desktop common.dll not found."

  Original title: google desktop common.dll

  When I turn on my computer is the first thing that lights up, this application has failed to start because google desktop common.dll not found. Re-installing the application may fix the problem. How to fix this problem? What do you do? or you re-install.

  This error message means that a Google application that requires the file 'google desktop common.dll' could not start because the file is missing. The first step to solve the problem is to identify the application that is using this file. Do you use Google software (ie: Google Chrome, Google Sidebar, etc.)? If Yes, what are the software you use?

  We will work from there,

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• Unsigned app deployment failed: "error: host name can not be null.

  Hello. "" I tried to download an app with Flash Builder 4.5 for my physical playbook unsigned, but this message has occurred: ' error: host name can not be null. The same mistake that happened when I tried to download the debugging token, but I managed to manipulate it using the command line. However, the problem with downloading mind because I can't run and test applications signed and cannot use the debug mode. Someone at - it had the same problem or knows how to get around? Additional information: Windows 7 (x 86); Flash Builder Burrito (build 287807), Playbook OS Version 1.0.1.1710

  I take that as a "I am the only one having this kind of problem" and nobody knows how to solve this (or has not yet read)

  [edit] so much worse... I just changed the IP address, this is the reason for the error.

• I receive the error RE5DX9.exe - Ordinal not found after installing Resident evil 5.

  Original title: error message

  Hai I use windows 8 pro recently I installed resident evil 5 on my pc, I get an error ' "RE5DX9.exe - Ordinal not found." " Here is the error in the event viewer. The 5297 ordinal not found in the dynamic link library xlive.dll. "How to solve?

  Hi Adhithyaraja,

  I suggest that take you a look at the existing thread resident evil 5 in xboxlive.dll the ordinal not found error that describes exactly the same problem and a possible solution (RyanT response - Support Engineer, October 5, 2009).

  Hope this helps and solves your problem. If Yes please mark your post as answered if this can help others in the community - thanks in advance.

  See you soon,.

  LZ.

• [ERROR] Feature is not found in any extension (org.apache.cordova)

  Hello

  I am trying to compile and sign my application and faced with the question:

  c:\BBWP\bin>java-jar bbwp.jar 'C:\Project\Projet RIM\App\Test.zip' g - o "C:\Project\Projet RIM\AppSigned" mypassword
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [INFO] The application of filling source
  [ERROR] Feature is not found in any extension (org.apache.cordova)

  The configuration is based on:

  > JDK 1.7

  > Ant 1.8.4

  > Blackberry SDK 2.3.1.5 Webworks

  > PhoneGap 2.0.0

  I have alread experienced solutions on several forums, such as:

  https://groups.Google.com/Forum/?fromgroups=#! phonegap/hY6bkLJWEVA/topic

  http://StackOverflow.com/questions/10978834/PhoneGap-1-8-BlackBerry-failed-to-find-feature-with-ID-o...

  but without success.

  The error still remains.

  Is someone can help me?

  THX

  Sorry if I posted this message in the wrong queue. I found the solution to my problem:

  I have not used the Test.zip file.

  1 / the project is initially placed at:

  C:\Project\Projet RIM\App\Test

  2 / after the compilation with the 'build Ant blackberry' command, the project Test.zip is generated in

  C:\Project\Projet RIM\App\Test\build

  3 / If the command to use to sign within a seoncd period must be:

  C:\BBWP>bbwp 'C:\Project\Projet RIM\App\Test\build\Test.zip' g - o mypassword
  "C:\Project\Projet RIM\AppSigned".

  4 / the output files are then

  C:\Project\Projet RIM\AppSigned

• Error (10,47): EntryFlowPageCO not found in the oracle.apps.ap.oie.entry class.

  Hi all
  
  I extended a CO named IndusFinalReviewPageCOXX and I got the following error.
  
  Error (10,47): EntryFlowPageCO not found in the class oracle.apps.ap.oie.entry.summary.webui.FinalReviewPageCO in the indus.oracle.apps.ap.oie.entry.summary.webui.IndusFinalReviewPageCOXX class.
  
  
  I already drag the EntryFlowPageCO class file in the path myclasses\oracle\apps\ap\oie\entry\summary\webui
  and import the file. but the error remains the same... After that, I compile the EntryFlowPageCO class file and found a CO EntryFlowPageCO imports more. I drag the class of this CO also file in the appropriate path... But still the same error.
  
  Please give me the solution as soon as POSSIBLE.
  
  Thank you
  Amit Jaitly

  Amit,

  In the standard central, you can check this controller as entryflowpageco is not under myclasses\oracle\apps\ap\oie\entry\summary\webui.

  Its under oracle/apps/ap/goose/entry/webui put the same under this directory structure.

  Kind regards
  GYAN

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I have error msikhd32.dll file not found on startup, how to solve this problem?

  msikhd32.dll

  There was a problem starting msikdh32.dll

  The specified could not be found.

  Hi Vipul,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that you receive error msikhd32.dll file not found when starting.

  To better understand the issue, answer the following questions.

  You did changes to the computer before the show?

  You can perform the methods suggested below and check if they will help you solve the problem.

  Method 1: Perform the clean boot, check if you receive the message.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: perform the complete analysis of a computer by using the Microsoft Safety Scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists, or if you want more help respond us. We are happy to help you.

• Extension of class Array, get Error #1069: property 0 not found with indexOf appeal

  I'm using inheritance to extend the Array class to create a class of paths that moves of Sprites/MovieClips around on the screen. I get a weird error on a call to indexOf. Here is the error:

  ReferenceError: Error #1069: property 0 not found on paths and there is no default value.
  to Array$ / _indexOf)
  table / http://Adobe.com/AS3/2006/builtin:IndexOf ()
  to Paths / Next () [D:\Stephen\Documents\Flash\TossGame\TossGameFirstPerson\Paths.as:40]

  Here is the corresponding code in the class of paths:

  SerializableAttribute public class paths extends Array
  {
  private var cCurrentPath:Path;
  
  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int is indexOf (cCurrentPath) + 1;.
  If (lNextIndex == length) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  } / / class

  I get the error in the highlighted line. cCurrentPath is filled with a trace object that corresponds to the object at position 0 of the this object (paths). I tried the following variants of the Next() function:

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = lArray. indexOf (cCurrentPath) + 1;
  If (lNextIndex == lArray. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = this . indexOf (cCurrentPath) + 1;
  If (lNextIndex == this. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = super . indexOf (cCurrentPath) + 1;
  If (lNextIndex == super. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  
  Same product if mistake it I try. Anyone got any ideas?

  Stephen

  Flash CS3 Pro (Version 9.0)

  Mark your dynamic class.

  class dynamic public railways extends from table

• Error message 'setenv.ini' not found during installation

  I want to install the XP Pro version of the cd but I get the error message "setenv.ini" not found

  Hello

  This occurs if you install Windows from the Microsoft or Toshiba Recovery disk?
  In addition, it would be interesting to know what laptop you have.

  The disc is maybe scratchy check it!

• Getting the error: the requested lookup key was not found in any active account activation context

  I can't run windows update. I get this error: the required search key not found in any active account activation context.

  I use XP.

  You are at least 6 months behind on updates to security critical. (Arrived Tuesday, 08 February, you'll be 7 months behind.)

  Your computer must NOT be connected to the internet (or any what local networks) in its current state. All your personal data (including passwords online banking & credit) must be considered at risk, if not already compromised.

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Fatal error. Object was not found.

  Hello

  I built aninstaller package that includes:

  3 x .exe

  LabVIEW2009 Dev Environment

  VISA Runtime Environment

  NOR-DAQmx

  When I try to run the Setup program (from the local hard disk) I get the following error, any ideas anyone?

  At soon inadvance, Alec

  .\Distribution.cpp(320): IInstallerError 10002
  Fatal error. Object was not found.
  class CPart object lookup by ProductCode cannot find the object {9A832E3A-8676-41CC-A945-9C6827D00B4C}

  I was building the installer directly on a network drive. If you create the installer on site and then copy it to a network drive, it works fine.

• XP Pro error message "requested lookup key is not found in any active activation context" appears

  XP Pro error message "requested lookup key is not found in any active activation context" displayed when some Start Menu options are selected or whatever it is run from command run. IE will not start. Windows Update ran at the last stop, but site selection are not displayed. Tried to repair XP Pro upgrade disk. Reinstalled SP3. The IE7 installation fails during the installation of updates. Cannot find the Activation Assistant. Help!

  This should certainly guide you in the right direction http://forums.techguy.org/web-email/839381-solved-requested-lookup-key-not.html

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer