I got two XP CD to do a repair on my XP system. Help me take an administrator

Similar Questions

• So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  original title: incorrect Homegroup password

  So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  All computers:
  Have enabled IPv6
  Use Microsoft Security Essentials with the last update
  Are connected to the same router (Linksys WRT54GX2)
  Have no other third-party firewalls or AV installed and have been neatly eliminated via their respective tools when they had their
  Can be seen in the network and can access any other files via 'network '.
  Have the correct date and time and are all in sync with time.nist.gov.
  Have the same network sharing settings (network discovery on, files and printers sharing folders public, sharing, streaming, wide, 128-bit encryption, sharing password protected, to allow windows to manage the homegroup connections)
  Network is set at home, not in public

  The computer that has implemented the homegroup is connected via ethernet to the router while other computers use to access the router 802.11 g I tried to delete and redo the residential group as well.

  Despite all this, it is said that the homegroup password is incorrect for both netbooks (where it says it has encountered an error). I realize that it is case sensitive and I entered the password correctly. I also ran the resolution of the problems of the homegroup on all 3 machines and still no luck. I also tried to change the password and restarting of machines.

  Any suggestions? I was _really_ hoping it will work right out of the box. Maybe it's something with the router? I don't really know. Any help is appreciated. Merry Christmas! : D

  Hello

  check out this link.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

• The two user accounts on PC have been changed to limited. No access to the administrator. How can I restore an administrator accounts?

  Since I have used remote support Microsoft.com, two user accounts have been converted to limited. None of us can access accounts administrator or owner on our pc running XP home. We receive notice of update program but cannot install because we do not have Administrator status.

  Log in Mode safe mode with the built-in Administrator account.

  John

• Hello, I am trying to install my cs6, but it says that my activation code is not valid, also my email which is registered as my id got hacked so adobe I can´t connect to adobe... help!

  Hello, I am trying to install my cs6, but it says that my activation code is not valid, also my email which is registered as my id got hacked so adobe I can´t connect to adobe... help!

  Error "serial number is not valid for this product". Creative Suite

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Bought Mountain Lion and got two letters on the license;

  but where to find the OS X? Mountain lion is not in the Appstore (bought sw) and said none of the two letters, where the return (OS X) to find and load.

  Any idea?

  ~ Karl

  There will be a download code in emails that you got. Open the Mac App Store, go to its home page, click on Redeem and get the code.

  (138579)

• Got two computers, but activation of Adobe...

  So I got a new laptop for my birthday. (yay me). and I was wondering because I already have Adobe CC on my main desktop how to transfer or copy cc adobe on the laptop?

  Do I need a new license? How can I order another copy?

  Hello

  You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

  You can download the installer for Creative Cloud from here:
  Creative cloud help | Creative cloud desktop.

  After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

• My iphone 6 pirate last year and I got two steps.  The hacker has changed the password and recovery key, and apple won't give me access to my itunes that has more than 2000 songs I paid a healthy price.  Help, please

  How can I access my itunes?  Last year my iphone 6 has been hacked and they took my apple ID all my emails and accounts as well as itunes.  Apple.  After a lot of stress, anger and begging has replaced all 3 of my iPhone.  However they refused to give me access to my itunes back!  which is what I want most.  More than 2000 songs of hard earned money are in my itunes and since I had stage 2 Audit not one * thing I could do.  I had over the phone.  and the pirates had changed the password and got a new recovery key!  I want my music thas it.  I've lost thousands of photos that when, in the cloud and that's life, but I paid a lot of money for these precious tunes I want them!  Can anyone help?

  Just provide evidence that the account is to you they probably asked.

• I got two sources of camera the same audio recording - how to use multicam to audio synchronization and display TWO cameras simultaneously

  I had two sources of camera recording the same audio - I want to be able to do is use mulitcam SYNCHRONIZE the audio and video at the same time and be able to use the two clips simultaneously in a video - multicam - how can we use the TWO videos? In Multicam, I can only go to one video at a time - is to detach anyway, so I can trim two camera responsition camera and 1 on a 16:9 screen? What would be the best way to do this? Any help would be welcome - Ty

  

  Two PPut copies the multicam in editing element, one on the other.

• Portege R500 - I've got two unknown devices after installing XP

  Hello

  I am looking drivers for the two unknown devices in the hardware Manager:

  alias
  "Intel(r) 82801GBM (ICH7-M/U) LPC Controller"
  and
  'System compatible ACPI Microsoft'

  Thank you
  Roger

  Hello

  Have you installed all the drivers Toshiba XP which appear on the European driver from Toshiba site?

  There is also a training installation document that gives the proper installation order. Please check if all the XP drivers were installed, as mentioned in this doc.

  In addition, you should check if you have installed the MS WinXP SP2 and Utility Intel chipset.

  Greetings

• Laptop turned on, password appears on black screen, windows loading bar appeared, then got two options in the BIOS Setup Utility and change Boot Device order, I don't know what is happening, help please!

  My sisters notebook froze and she turned off the power switch, when she turned on the screen was black and a password box appeared when I entered the password, the XP loading bar came as usual and then I had two options at the bottom of the screen. We want to press F9 for and the other was to press F10 for BIOS Setup utility, after seconds, the screen went black and then appeared again the password and the circle continues. The laptop is only 1 week and I don't know if it's something she did or if it's a technical foul, I would be grateful if someone could help me or if I should take it to a technician. The laptop is a Compaq Mini 110 and it works on Windows XP Home Edition.

  Hi, your sisters Notebook is under warranty and it could be a hardware problem.

  As the laptop is only one week.

  I suggest that advise you your sister back to the place where it has been sold since.

  Slan go foill, Paul

• BlackBerry smartphones, I've got two blackberry that does not load

  I have two blackberry 8520 which does not load the loading of the operating system a third then switches works, other charges and reload the software entries... I tried to force the detection that he doesn't show me not all ports that I have downloaded the software but still nothing happens...

  Try this

  Download the software for the device of the carrier's Web site

  Intall on the computer.

  After that plug your device in without the battery, once

  go to start / computer / C drive / Program files (x 86) / Common files / research in motion / application loader / Loader.

  Double-click the LOADER to run.

  Once run it wait detec your device.

  Once done you will be routed to choose your language.

  Select the language and then click NEXT

  After that, you will see 'finished' or 'close '.

  Click on it and the process will start

  during the process when you receive an error that says "cannot detect device".

  put the battery back in and continue on the new attempt until that proceed it process.

  in the end, you may receive a "fatal error occurs", but that's ok.

  your device should restart until now.

• I got two e-mail addresses and deleted one of them who had many local files attached. Can you collect records?

  I stopped using my original e-mail account and started using a new. I had created several local folders when using the original email. Because I kept getting the error messages for the original e-mail account whenever I started to Thunderbird, I deleted the original mail account. I didn't know that local issues would also be deleted. Is it possible to recover the local folders?

  Thanks for the info. Unfortunately I'm not a qualified user of Linus. All I know not really (and not so good) is the use of the graphical user interface. I found the name of my profile folder but do not know how to see.

  Jerry

• Last night my PC Windows 7 got two updates automatic and afterwords when I try to log into windows.

  He tells me that the password is not valid - but I know that it is. I tried to use System Restore (using the disc of windows 7) and it said it was successful, but it still does not accept my password. I tried to restore back to December 6, however the password is still not accepted.

  Hi Joel_Schneider,

  Welcome!

  You can try the steps below, remove the updates by using the DISM tool and follow the steps below:

  1. start under System Recovery Options , and then select command prompt.

  2 from the command prompt, run the following command: Dism/Online/Get-Packages

  3. This will produce a list of updates installed and packets.  They will look like this:

  4. package identity: WUClient-SelfUpdate-Core-opLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226

  5. status: installed

  6 output Type: Feature Pack

  7. install time: 25/09/2009 12:02 AM

  8. find the most recent and then make a note of the name of the package.

  9 then run: dism/Online/Remove - Package PackageName:WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226(name of update from previous step)

  10. restart your PC.

  11. you want to start with the most recent and remove them one at a time to find the update problem.

  For more information about DISM, go to the link below:

  Maintenance packages from the operating system command line options: http://technet.microsoft.com/en-us/library/dd744311 (WS.10) .aspx

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ive just got two emails from windows live but I don't know if its for real or a scam can you all help me

  Here are the details of amount this is the link he wants to send you https://login.hotmail.com/config/login_verify2?puser= * address email are removed from the privacy *.

  That's who he had to * address email is removed from the privacy *.

  Hello

  Another scam.

  Please read this Microsoft for information about these types of scams.

  "Scams by email or web: how to protect yourself.

  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  Scams can contain the following:

  • Alarmist messages and threats of closure of the account.

  • Promises of money for little or no effort.

  • Treats as its too good to be true.

  • Requests to make a donation to a charity after a disaster that has been in the news.

  • Bad grammar and spelling.

  How to report a scam

  You can use Microsoft tools to report an alleged scam.

  • Internet Explorer. While you are on a suspicious site, click on the gear icon, then tap on Security. Then click on Report Unsafe website and use the web page that is displayed to inform the Web site.

  • Hotmail. If you receive a suspicious email message that asks for personal information, click on the checkbox next to the message in your Hotmail Inbox. Click on mark as , then point to Phishing scam.

  • Microsoft Office Outlook. Attach the suspicious email message to a new e-mail message and send it to * address email is removed from the privacy *. To find out how to join an e-mail message to an e-mail message, see attach a file or other item to an e-mail message.

  See you soon.

• Inadvertently, got two CS6 & CC on my imac, should I be both?

  Hi, I seem to have endend up with more complete CS6 both full CC on my imac. I joined as a demo free and then improved later at CC. Should I have them both? of can a ditch? and if so who?

  Hi SeeviewSolutions,

  You can have both versions installed on your system if you wish.

  If you want to get rid of a version, you can remove the CS6 one. However,.

  I advise you to keep the first Pro CS6 as Encore CS6 is packaged with it.

  Since even in is no longer available in CC version.

  Please post on the Adobe Forums.