I had an accident with 9 critical errors 'boot sector of the hard disk is damaged; Hard drive does not match the system requests and sounding more serious elements do - what do I do now?

Similar Questions

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• Problem with installing Windows on a hard drive, HARD drive does not get detected after installation

  Original title: help with hard drive of the computer.

  Flow of the problem:

  My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals

  «intell...» »

  and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean.

  He said "not plugged in the media. Check the power cord.

  Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS.  He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected.  I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas?

  Hello Chris,

  Thank you for visiting Microsoft Community.

  According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer.

  I would say to format the hard drive once more and try to install Windows through normal Windows installation process.

  Refer to the section "using the installation option custom if no operating system is installed" in the thread below.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive.

  Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Canvio Plus 2.5 "1 TB external HARD drive does not work with USB 3.0

  I've had this drive for about a month.

  I am on Windows 7

  I can only operate by connecting to USB 2.0 ports. It is then visible in 'My Computer'.

  If I connect to USB 3.0, it turns on the case but does not appear in 'My Computer'.

  I tried it on all my USB ports 3.0 - up on one and two in the back of my case.

  I checked my BIOS and USB 3.0 is enabled.

  I tried to follow the suggestions in the user manual, but the drive does not appear in the management of so connected devices on USB 3.0, but it does when connected in USB 2.0.

  Any ideas?

  Hello

  As much as I know the Windows 7 system requires installation of additional USB 3.0 driver.

  Many laptops and computers use USB 3.0 driver that was released by Intel... it is because of Intel chipset...

  I guess that USB 3.0 is already installed, but probably you need to update the driver at least to the newest version...

• STOR. E partner HARD drive does not work with USB 2.0

  Hi all

  I recently purchased a 1 TB STOR. E partner HDD and it worked without any problems on my laptop Macbook Pro which has only USB 2.0 ports.

  A few days ago, the HARD drive has been disconnected from the laptop without ejecting first, and now it isn't recognized more than my laptop.

  I tried on a PC Windows with USB 2.0 and 3.0 ports and discovered that it is recognized when I plug in the port 3.0 but not on version 2.0.

  What should I do to have the HARD drive works again with USB 2.0?

  Many thanks in advance,
  Eduardo

  > I tried on a Windows PC with USB 2.0 and 3.0 ports and discovered that it is recognized when I plug in the port 3.0 but not on version 2.0.

  Stor.E partner HDD needs maximum power of my 900.
  The USB 2.0 port provides 500mA just
  If you can connect the HARD drive to two USB 2.0 ports using a USB cable in Y
  Or another option: connect a USB hub with external power supply between the HARD drive and the USB 2.0 port

• Hitachi external hard drive does not work on Sony with windows vista

  I use a Sony with Windows vista laptop. I just got a 500 GB Hitachi external hard drive today. It was detected after that I connected, but there is no way that I can access the hard drive and save the files it contains. I tried to go to the administration tool and tried to change the letters of readers and paths, but this isn't an option for me (he is gray and I cannot click on it). It showed that the disk is healthy but unallocated. Could someone help me please? I really need to back up my laptop using this hard drive external. Thank you. Irene

  Hello Irene,.

  ·         You get the error message?

  ·         Did you do changes on the laptop before the show?

  Follow these methods.

  Method 1: Run the fixit of the article.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the article.

  Tips for solving problems of USB devices

  Method 3: Try to access to the external hard drive on another computer and check if the problem persists.

• Error after reboot. "The system has recovered from a serious error".

  Hello

  After that restart will appear, this kind of mistake, what is it?

  BCCode: 1000008e BCP1: C0000005 BCP2: BF8A1F86 BCP: F61FA914

  BCP4: 00000000 OSver: 5_1_2600 SP:3_0 product: 256_1

  It's windows XP Pro

  Hi Zurajishkariani,

  You did it of any material changes or software on the machine prior to this problem?

  This problem occurs because after a Minidump file is written, the paging file continues to have a flag that indicates that a Minidump file must be written.

  If you receive this error message after every restart, you can follow this link and check if the problem persists.

  A "System has recovered from a serious error" message after every restart.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internal SATA hard drive does not come with Windows 7

  It's quite strange.

  Computer has 4 SATA and 2 DVD discs.

  Windows 7 sees only 3 drives. Does not even appear in disk management... It is not the case to find.

  The missing disk is partitioned in ~ 100 GB, which contains a working copy of Windows XO Sp3 and a second empty partition (~ 400 Gb).

  It manifests itself in Bios and I can even boot from the WinXP partition (selected through the bios).

  In Windows XP, I see all 4 disks in disk management/Explorer, etc..

  But when I boot on Windows 7, the entire disk is no where (no, it isn't there with a letter from non - drive is not there).

  Have even tried switching around SATA cables, but still no effect.

  Any ideas?

  Thanx

  Solved...

  I ran a "scan for hardware changes" in Device Manager and it finds the empty partition on the disk. Curiously, he has not found the XP partition. Scanned a bit more time and nothing that the partition is empty. Restarted (actually shutting down) and re-ran the scan and it found all!

  Thanks for your help :)

• Now that PE 13 does not support my miniDV camcorder and my library of DV tapes, what do you suggest I make?

  I just bought PE13 for see is no longer only supports my camcorder miniDV and 50 tape library +, what do you suggest I do?

  cjrenson

  Please check and review the Adobe document which offers workarounds regarding the situation prevailing since the data DV and HDV capture firewire features have been removed from its latest version 13.

  https://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

  Also, for possible programs to capture which would be subsequently imported into a Premiere Elements project with its add media/files and folders/active project...

  For Windows

  WinDV WinDV

  HDVSplit HDVSplit 0.77 beta

  Please let us know if you need further information.

  Thank you.

  RTA

• TOSHIBA external hard drive does not work with Mac

  Finally, I used my Toshiba external hard drive on my MacBook Pro in December. I want to keep all my photos, and I've always been able to add new photos to it and delete the 'old' out of it. I plugged it today to add more photos, and it is not letting me. I went to the sharing & preferences and he read that when he used to say, read and write. I went to the info, and I noticed, it says that the format is Windows. Why he did change and why can't I use it? Can I fix it? Thanks in advance

  Looks like you have formatted the NTFS drive that is read-only for OS X. Copy data to another drive, then partition and format the drive correctly for use on a Mac.

• Paper size error: paper selected in the printer driver does not match the study

  HPofficejet 7500 E910

  don't know what you mean

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• Several pop-up windows "Security Fix" indicating the many problems w/computer & scan to see what they were. returned with several "critical" errors & several "warnings".

  Original title: fix the system

  While the site of the car got several popup windows "Security Fix" indicating several issues w/computer & scan to see what they were.  Do that & came back with several "critical" errors & several "warnings" says had to buy the program to correct.  Then stop computer & when turned on the next morning the only office was trash & start menu is empty with the exception of all programs.  Went to windows defender for all programs & said it was off?  I didn't turn it off & when trying to turn back & says cannot open program, error 0x800106ba.  Help!

  Do you have any antivirus, in addition to Windows Defender?

  System Fix is a fake program aimed at obtaining the payment card information. If you have used your card with it, contact your card provider immediately.

  There are instructions to remove the difficulty here:

  http://www.bleepingcomputer.com/virus-removal/remove-system-fix

  Use only written instructions. Do not download anything from advertising on the Web site.

  This program can damage your computer and the removal instructions may not be completely effective.

• I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not remove or add the program.

  I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not use, remove or add the program. How should I proceed?

  TIA,
  BWSwede

  Try to create a new profile.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

  What problems do you have that you want to reset Firefox?

  Firefox creates a new folder of old data of Firefox on the desktop?

  If reset you Firefox and a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved on the desktop (old data of Firefox).