I have a HP Photosmart 3200 all-in-one. New Catrigies are only a few (about 10) impressions

Similar Questions

• I have a hp photosmart C6380 all-in-one and it will not print

  PRINTER

  I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

  Hello

  Make sure that your print spooler service is started.

  At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

  a. Click Start, type services.msc and press ENTER.
  b. scroll down to print spooler.
  c. start the print spooler service.

• I have a hp photosmart c6180 all in one. for these last days, it does not switch. ins

  I have a HP Photosmart C6180 All in one.  For these last days, it does not switch. When I insert colored part of the cable into the printer then led on the cable is cut, that's why the printer does not illuminate.  Please let me know what could be the problem.  I thought that the cable may be defective, so I bought a new cable, but the printer does not work.

  Hi rajeshgaur,

  You can call our support lines to check if the printer can be repaired and how much he would run to fix the unit. The other option you have is to contact support and check in the trade trade program.

• I have a hp photosmart c7250 all-in-one wireless radio does not work

  I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

  We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

• I have a hp photosmart 2575 all-in-one and I got a new computer and I can find my cd how to load

  I have a hp 2575 all-in-one and I got a new computer and I can't find my cd so how can I down load to new computer

  Hi bdworley79,

  Click on the link below and select the operating system on your new computer to download the drivers.

  Downloads of software & driver - HP Photosmart 2575 All - in - One Printer

• HP Photosmart 3200 all-in-one

  Where can I find the drivers for the all-in-one Photosmart 3200? Whenever I try to find the drivers I can only find the 3210 3210a,... etc. I have the 3200.

  I need drivers for Vista as XP.

  If it works, which I am sure it will, then I ask you to mark my post as the Solution so that other users with the same issue can benefit from this thread.

• I have the HP Photosmart C4500 all-in-one and it stopped scanning to my computer.

  Until 2 weeks ago, it was scanning fine on my computer, but now nothing happens and I get the message 'error analysis. try scan from computer or see the documentation. "Then when I search, it says that the scanner is not initialized. I have to uninstall and reinstall.  Why that would happen.  It prints very well.

  Hello is a process of discovery of device that must be present in a router to allow devices Apple find printers on the network.  A router Aple has obviously, Hello.

  We will begin by restarting the router by pulling on its power supply momentarily plug, then turn on the printer with its power button.  Make sure that the printer is connected to the network by printing a network Test Wireless in the menu on the front of the printer wireless.

• I have a new router and the printer does not work. I have the hp photosmart c4795 all-in-one.

  What should I do to get the router to recognize the new router

  It's working now. I deleted my printer, downloaded the software from HP and added the new printer. Followed the instructions and it is running. Thank you

• I have a HP photosmart 2575 all-in-one. I'm trying to print a map on the map of 250g, will not print,

  try to print a map of 250g, keeps jamming, can I set up the printer to do this job? Print very well on anything up to 210 g, then goes nuts!

  Hello

  As you will find by product spedification, the printer supports up to 200 g weight of cards,

  Most of the printers of the consumer is not able to manage these media weight

• Need to re-engage the plateau of copy for a printer Photosmart 3200 all-in-One series of.

  I accidentally pulled the tray completely and now can not slip again. Does anyone know how to fix it?

  There should be a lock or lever that you can push that will open the slot to slide the tray in.

  Look on each side of the opening (where you would drag the status bar), and it should be something you can PUSH/PRESS release.

• HP Photosmart C4599 all-in-one: new router so want to put in the SSID code on printer. No screen on the printer to do. How can I do?

  Hello

  I want to print wireless.  I recently changed my router to a 4G one and a new internet provider.   I need to enter the SSID of the router to the printer code so that it can join the wireless network and connect to my MacBook Pro.  Initially when I bought the printer, I was able to connect wireless using a provided HP CD - this does not currently work with Mac OS X 10 El Capitan, even if I have loaded down the HP update drivers.  The printer does not have a screen to change the SSID directly so I guess I have to change sort through my Apple laptop.  I you'd be grateful if someone could help me

  Clonfert

  Greetings @Clonfert,

  Thank you access the Forums from HP Support for extra support! I see that you want to configure the printer on the new wireless network. I will do my best to help you with this problem.

  I have provided a few steps to set up the printer via an ad-hoc connection and then convert it into infrastructure. (your network) Since there is no HP software to run the wireless installation.

  Click the airport near the upper right corner on a Mac.

  Click on the HP printer in the list.

  It takes about 3 minutes to connect.

  Once you get a solid blue light on the printer, it is successfully connected.

  You will not be connected to your network for a bit while we set up the printer on the network.

  Print the configuration page to get the printer IPv4 address.

  Open your web browser, type the IPv4 address for the printer (Safari).

  This will load the Web built-in to the printer server.

  We can now configure the printer on the wireless network.

  Click on the networking, on the left side, click on Wireless, fill out your information for the network. (The network name SSID, set it to the infrastructure, enter your password and the encryption type)

  Apply the settings.

  Now back to the airport closest to the top right corner on a Mac and select the name of your network.

  Just add the network printer on Mac now.

  Click on the Apple.

  Click on System Preferences, click Print and scan icon, then click on the + sign, then select the printer from the list, click Add. (you may need to click the drop-down list to select the printer name to add it in)

  Test the printer.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• Currently, I have installed my HP Photosmart C6180 all-in-one series

  How can I get my printer to print from my pc?

  If you have lost or do not have the HP Photosmart C6180 all-in-one configuration guide, you can find it here in PDF format.
  You can find the HP Photosmart while here in PDF format.  Go here to order installation CD-ROM (v7.0.2 August 15, 2009)
  or to download the drivers, applications, patches, updates, and utilities.  Do not connect the printer immediately!  Read, then
  Follow the instructions to install the printer.

  You will need the Adobe Acrobat Reader software to read PDF files, if you do not already.

  You can vote if it is useful.  Click on brand or propose as answer if that answers your question.

• HP PHOTOSMART 3210XI ALL IN ONE: printer says paper size or type is incorrect when you print an envelope from Word

  Hello

  I've had this printer for years & were able to print my envelopes in Word without problem. Today, I tried to print an envelope without result. The printer keeps giving me (type and paper size is incorrect). I have not won the printer & reinstalled. Still no change. Any ideas?

  Thank you

  Dear AIRASSAULT18B,

  Please follo the steps in this document:

  http://support.HP.com/us-en/product/HP-Photosmart-3200-all-in-one-printer-series/439599/model/439603/document/c01824353/

  I hope you find it useful.

  Greetings.

  * I am not an employee of HP, my work is voluntary.

  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• HP Photosmart 2570 all-in-one series.

  I have a Hp Photosmart 2570 all-in-one series. I can't install it on my new laptop which has windows 7 (home premium) and microsoft office professional plus 2010 is installed.

  He tell me it is only compatible with windows 2000 and windows xp and vista, and I need to improve.

  Please can I find advice on how I can install this in a very simplified way.

  regards Diamond1967.

  See here for an update of drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=441241

• HP Photosmart c7280 all-in - One Mac 10.7.1 (Lion) "Double" option is grayed out and cannot be used?

  I have a HP Photosmart c7280 all-in-One printer and a Macbook Air running OS Lion (10.7.1).

  I'm trying and who need to print via the option "Double" that appears under the menu of "Layout" drop down tab option, the option 'Double' however seem to be grayed out as if you are not allowed to use it.  I'm sure this isn't the case, I don't know how to unlock but I guess?

  I just made sure all my software was updated and is currently.

  Everything is perfect on the printer and I used it for years, thank you!  I just want to know what on earth am I doing wrong or need to do to unlock this "Double-sided" parameter, so that I don't waste a ton of paper!  Thanks again!

  Sincerely,

  DAP413

  Hi DAP413,

  To actiate the two-sided accessory, you have to enable the printer settings:

  -Enter in System Preferences > print & Scan

  -Double-click the name of the Photosmart printer to open the print queue.

  -Click the printer setup button

  -Click on the driver tab and make sure the duplex printing accessory option is checked.