I have the HP Photosmart C4500 all-in-one and it stopped scanning to my computer.

Similar Questions

• I have a hp photosmart C6380 all-in-one and it will not print

  PRINTER

  I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

  Hello

  Make sure that your print spooler service is started.

  At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

  a. Click Start, type services.msc and press ENTER.
  b. scroll down to print spooler.
  c. start the print spooler service.

• I have a hp photosmart 2575 all-in-one and I got a new computer and I can find my cd how to load

  I have a hp 2575 all-in-one and I got a new computer and I can't find my cd so how can I down load to new computer

  Hi bdworley79,

  Click on the link below and select the operating system on your new computer to download the drivers.

  Downloads of software & driver - HP Photosmart 2575 All - in - One Printer

• I have a new router and the printer does not work. I have the hp photosmart c4795 all-in-one.

  What should I do to get the router to recognize the new router

  It's working now. I deleted my printer, downloaded the software from HP and added the new printer. Followed the instructions and it is running. Thank you

• I have a hp photosmart c7250 all-in-one wireless radio does not work

  I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

  We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

• TWAIN plug-ins for the hp Photosmart C6280 all-in-One for Photoshop to Macintosh

  Where can I download the Photoshop (CS4) for Macintosh plugin twain for hp Photosmart C6280 all-in-One, so I can scan from Photoshop?

  The HP software only provid ICA interface support (purchase of Apple's Image Capture) which is the native OS X interface.

  TWAIN interface is no longer available for OS X, which means that you will not be able to scan from Photoshop from Adobe directly because it doesn't support the TWAIN module.

  You have to parse through Capture of Image, then you can open the files analyzed on Photoshop.

  Shlomi

• I have a hp photosmart c6180 all in one. for these last days, it does not switch. ins

  I have a HP Photosmart C6180 All in one.  For these last days, it does not switch. When I insert colored part of the cable into the printer then led on the cable is cut, that's why the printer does not illuminate.  Please let me know what could be the problem.  I thought that the cable may be defective, so I bought a new cable, but the printer does not work.

  Hi rajeshgaur,

  You can call our support lines to check if the printer can be repaired and how much he would run to fix the unit. The other option you have is to contact support and check in the trade trade program.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• Photosmart 4700 all in one print but not scan

  My photosmart c4740 (all-in-one) printer will print but not scan

  Hi Donpaladino,

  1. What is the installed operating system on your computer?

  2. what happens when you try to scan documents?

  3. you receive an error message?

  I suggest you to follow the steps and check if it helps.

  Follow the steps in the link and check if that helps.

  HP Multifunction printers - I can't scan in Windows using the HP software

  If the problem persists, you can also check out the links and check if it helps.

  Scan and send (e-mail, send to folder, digital transmission, etc.)

• I have a HP Photosmart 3200 all-in-one. New Catrigies are only a few (about 10) impressions

  My printer is an all-in-one HP Photosmart 3200. I only needs for a number of printed documents smaall, while the printer is inactive in longer periods.

  After you install original HP Color catrigies I can print only about 10 pages A4 prior to the like of the printer with the message: unable to print, replace catrigies, not enough ink for printing.

  Looks like you are having some problems with the ink system. To start I'll make some recommendations for the maintenance of the printer. In general, if you won't be using the printer for an extended period of time you have to remove the cartridges and put them in a ziplock bag. I would recommend that you put the cartridges in once every few weeks (I would say no more than two) and print something small that uses all colors. This should keep the cartridges and print heads so that it does not dry.

  Revitalizing your cartridges, you can try running the Auto print head and cartridge cleaning process. I would like to make this step more than three times to see if it improves the responsiveness of your cartridge.

  This machine has a removable-printhead or a basket that the ink is in?

  Let me know and I will respond as quickly as possible!

  -Spencer

• Installation of the HP Photosmart C4480 all-in-one - code 15471570 error condition

  I had all types of problems to install my all-in-one device - uninstall IE8 beta helped me move forward 3 steps of progress 4 installation, but now I get the following error message:

  now launching = X:\hpzprl01.exe m preloadicexes l - f 'X:\hpoins29.dat' n ° XXX validate could not copy file from X:\PS_AIO_03_C4400_productcontext.cab to X:\PS_AIO_03_C4400_productcontext.cab. using CopyFile(); has failed with error = 0x3e7: error running a paging operation.

  Cannot copy the file: \PS_AIO_03_C4400_productcontext.cab to X:\PS_AIO_03_C4400_productcontext.cab. using CopyFile(); has failed with error = 0x3e7: error running a paging operation. CopyFilesNoDecompression () failed with error to run a paging operation.  Exit code = 999

  any help would be greatly appreciated

  Thanks to your advice and did the following

  • I did a complete uninstall of the software ftp://ftp.hp.com/pub/softlib/software4/COL8988/mp-24061-2/gr_uninst.exe
  • Register to reinstall
  • and ran this ftp://ftp.hp.com/pub/softlib/software4/COL9076/oj-24444-2/AccessDeniedUtility_1_3_4.exe

  reinstalled the software but instead to use easy installation has made a breakthrough and only installed the necessary software, once it succeeded I then ran the entire upward and installed other software.

  Scanner, printer and copier now work yay

  now just need someone to tell me how to check this post as a success

• I have the series of J611 all-in-one Deskjet 3050 has and that a part of my document is being analyzed.

  The paper is correctly centered, and it is scanning and opening perfectly, only part (the upper right corner) of the document appears. I tried to copy a document to see if she read the document correctly, and it copies fine so I know it's the reading of the entire document. Why he won't open on my cell as a part? I tried to move around or zoom out, but when I do, it shows only a part of it.

  Mucking around with some of the parameters...

  I got the scanner to scan the entire page!

  I open the HP utility and deselected "Activate Scan to Computer" (which allows to start the scanner itself analyses). -> Then I went and scanned the document via "Applications"-> "Hewlett Packard"-> HP 3 '' scanning application-> and pressed 'scan '.

  Weird. Don't ask me why it works, but it's a work around that works.

• Photosmart 2575 all-in-One printer scanner copier scans no longer, print only; MSI file not found

  It worked beautifully and still works fine as a printer, but can no longer answer mode "scan", which gives the message: "no scan options...". »
  I downloaded and installed your software (AIO_CDB_2570_Full_Win_WW_130_141.msi) from the HP Web site - even received a "Welcome" message after installing on my laptop (HP Mini running Windows 7 with all updates).  But when Windows tries to configure the installation package, it fails... (Message: Please wait while Windows configures HP Photosmart Essential.)   ...  Time remaining 1 minute' - then it gets no further.)

  Center of HP solutions running on my HP Mini, the message is: "your HP Photosmart 2570 series is ready" and I can adjust the parameters of scanning on the 2575 of my laptop. -for laptop and 2575 are "talk" to each other...
  When I run printing HP and Scan Doctor 4.4, it found errors of Solution Center & Twain & tells me I need an update to fix the errors, but it sends me to the same place from where I have already downloaded the software updated!
  Windows7 does not recognize the newly installed software & more like another package: "HPPhotosmartEssentials.msi", which he says he can't find.

  Instruction was also found on the HP Web site: "Locate & install the .msi file is missing file in the Temp of your computer folder", but there is no msi file in the Temp folder (download goes to the downloads folder).

  Please response ASAP - I cannot USE MY PHOTOSMART2575 MORE scanning DOCUMENTS and have lost DAYS on this - making circles in the round...

  I look forward to your help!

  Jeanne

  [Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].

  Sorry to say your advice has not solved my problem - but received a phone call the week last of Henry of HP at Gateshead (n. of England) support.

  After 4 hours or more (he missed his lunch...!) firmly on the phone and computer being "picked up" remote, it has removed HP all THE files on my computer (HP Mini) and then reloaded OLD original software for 2575 with updates,... Finally got all-in-one scan with the HP Mini success - so big thanks to Henry at Gateshead for his help there... :-)

• Photosmart C7180 All In One: Photosmart C7180 All In One and Windows 8.1

  I recently changed in the course of an older PC using Vista Windows 8.1 a new unit.  I downloaded and installed the latest software and drivers from the HP support site and can print documents and photos.

  However, everything I print seem to have a green tint, pictures are green and when I print in black and white, the color of any text is printed in green and when I print in color, red fate yellow, etc.

  Can anyone suggest what is the problem?

  Hi @mitch60,

  From your description, it seems that this quality problem of barely since the upgrade to Windows 8.1. Colors appear turned off when you copy to? From my understanding of the issue, I suspect that the following document will be more useful; HP Photosmart C7100 Series all-in-One - color wrong.

  I hope this helps.

• HP Photosmart c4400 all in one and Windows 8

  Hello

  My friend has Windows 8 on its new Toshiba Satellite c850d-11 q.

  Trying to install his C4400 printer all in one, a message appears saying that it was not compatible with the OS

  Can I download drivers for this OS, if so how please?

  It almost takes an idiots guide but can follow the advice.

  Thank you

  Of course, you can save the file, burn it on a CD and send it.

  Then double click on the file from the CD will run automatically the installation.