I have a popup at the top of the screen when moving from one page to another in some sites that Firefox prevented me from getting to this page, so I have to keep hitting the button "allow." How to prevent this?

Similar Questions

• I can't apply a snippet of ActionScript to a button once a motion tween has been applied to the button. How can I do this?

  I can't apply a snippet of ActionScript to a button once a motion tween has been applied to the button. How can I do this?

  I use Adobe Flash Professional 15.0.1.179.
  My operating system is Mac OS x 10.11

  I am able to apply a snippet of code ActionScript for the button before you apply a Tween movement on the button; However, when I try to apply the snippet for the button after the motion tween has been applied, I am unable to do so. The action panel reads "Select a single image to apply or view script."

  Hi Robert,.

  That seems fine. You should be able to add code snippets at this stage.

  Try following the steps below:

  1. Select None (click somewhere on the empty area on the stage)

  2. click on frame 1 of your third layer. (be sure that a picture is selected)

  3 open the Code Snippets Panel, choose the desired code snippet and apply it. (the code must obtain added layer Actions.)

  If you write code manually, select frame 1 on the Layer 1 (shares) and add the code here.

  I hope this helps!

  Mabrouk

• Cannot install addon off-site because "Firefox prevented this site asking you to install the software on your computer.

  I try to install GMail Watcher by Sonthakit. It is hosted off site here: https://sites.google.com/site/sonthakit/gmailwatcher

  Whenever I try to install the addon by clicking on 'Install the free', Firefox tells me "Firefox prevented this site asking you to install the software on your computer" and does not give me an option to ignore the warning and install it anyway. I clicked on the padlock icon in the address bar and activated all the appropriate permissions, but it will not yet let me install the addon even after restarting Firefox. I have just reset Firefox and use the latest version.

  How can I say grass and let me install the Firefox addon?

  This is because the part of the page button is loaded into an iframe, as you can see if you click on the button install free
  You get only the button allow if this button is located in the home page and not when the button is in an iframe.
  One solution is to open this image in a new tab by right clicking the button.

• Hi, I put the web filtering to the general, but there are some * site that always appears. Please notify

  Hi, I put the web filtering to the general, but there are some * site that always appears. Please notify

  Hi EddyMoe,

  You have encountered this problem because the site is not popular enough, or the content of Web site changes frequently that it has not been classified as an adult site. Security checks family with service of content classification to determine the category of the site. For more information about how Family Safety determines the web content, please refer to this article. To avoid this, you must change your level of web filter to Allow list only. To do this, follow these steps:

  1. connecting the account parent in http://fss.live.com
  2. under the child's name, click change settings
  3. Select the Web filtering.
  4 adjust the slider for web filters in list only or to your preferred configuration.
  5. click on Save.

  6. click onWeb filtering lists.
  7. Enter the web address that you want to allow in the box and click allow.
  8. click on Save.

  Finally, please always remember to update the family safety filter so you can have the latest parental control settings.

  Thank you!

• TrayApp.msi comes and I have to keep hitting cancal several times to get my Start menu, can you help me?

  TrayApp.msi comes and I have to keep hitting cancel many times to get my Start menu, can you help me?

  It was the only part two of my answer ;-)

  In any case, it seems to be related to the HP printing software.

  Here are the possible corrections:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00811375&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00857032&CC=de&LC=de&DLC=de

  (this one is in German, I can't find an English, please try yourself to find one on the HP site)

  If you can't always solve the problem should ask for help in the forums of HP.

• How do Camera Raw to open in PS, when moving from a BRUTE from LR image?

  How do Camera Raw to open in PS, when moving from a BRUTE from LR image?

  I know there must be an easier way.  I can not open no matter what I do.

  Hi RusticDiva,

  Silkrooster is correct on Lightroom. However, if you have Photoshop CC you can use Camera Raw as a filter to make additional changes to Camera RAW:

• How can I make Firefox open the links that I click on in my program of mail without having to click on the button "allow" every time?

  When I am in Gmail and I click on a link, Firefox ALWAYS appears a tab asking me if I want to allow this. I don't want to have to do this whenever I want to access a link. How do it automatically the link without any intervention from me.

  I use Firefox v.11.0

  Go to your Firefox Advanced panel - accessibility, navigation, network, updates and other settings in advanced Firefox. On the general tab, under accessibility, uncheck the option "warn me when websites try to redirect or reload the page.

  Ref: http://kb.mozillazine.org/accessibility.blockautorefresh

• Smart Z580 Fan Noise Control - I found the button, but how does it work?

  I just bought a Z580 with Windows 8. It has a Smart Fan Noise Control sticker. My understanding is that it can be used to control the fan speed. How? I don't find it in the manual. The button is the right most of five white labels under the badge of lenovo under the screen. Then, the fan (not really a button) button is one that looks like a sign with a quarter moon on the right. If I press on it, it does the cleaning thing fan but how do I speed?

  I would try to change the speed of the fan because my fan made a very slight sound pulse. Otherwise I love this computer. It has so many interesting features and works well.

  I think that you must install the version of Win7 power management software, as I think the Win8 version has only the option "dusting", when the Win7 version has 'standard', 'silent' and 'effective heat dissipation", also the"dusting"option by pressing the sensitive, stars and moon symbol.

  Make a system restore point before changing anything.

  John.

• Since recent iOS updated my 6s lights (lock screen) when moving or touching the screen

  Incredibly annoying and battery draining experience that only began just after I updated the iOS

  The lock screen lights up constantly, even when I'm not in contact with one of the buttons (I'm still not near the Home button).

  I have since disabled touch 3D , but it still happens.

  Try a forced reboot. No data is affected by this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• Since the last update the Facebook and Twitter embarks on a site that I use often went empty. This is not the case with other browsers.

  "Living foods" to Twitter and Facebook on a site that I use frequently have only a title but no content 'feed '. I think that this problem started 3 days ago, when Firefox has been updated. The problem is not present in using another browser and not on the phones or tablets.

  One of the changes in Firefox 42 title adds a blocker follow-up in private browsing windows. That type of filtering may affect integrated features of the social site.

  If you use private windows, you can disable the functionality of anti-tracking on the Options page as a test. This article contains more information on where to find this setting: the Tracking in private browsing Protection.

  If the problem occurs in windows common, hmm... I think you have already tested in Firefox Safe Mode, but if not:

  In Safe Mode, Firefox disables extensions, hardware acceleration, and a few other advanced features to help you determine if they are at the origin of the problem.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

• Value of the parameter is not displayed when moving from page of the dialog box

  Hello
  
  The question I face, is that I have a backup button with the logic in the PFR in which I call a page of dialogue that has an OK button. I give the floor to press ok another page. I need to capture a XXParty parameter that I put in the CO LIC key but is not displayed in the central of the PR of the other page that is called when you press the OK button. Probably I'm missing something very small. Any help would be greatly appreciated. Thank you
  
  
  SAVE BUTTON controller LIC... (Call the dialog box and the parameter)
  =============================================
  If (SaveButton! = null)
  {am.invokeMethod ("addNotes", params);  Transaction record.
  System.out.println ("save backwards");
  Try to build your own Page of dialogue here...
  String MainUrl = "OA.jsp?page=xxksms/oracle/apps/imc/ksms/webui/ShipperOverviewPG & retainAM = Y;
  OAException descMesg = new OAException ("XXTSA", "XX_KSMS_SAVED_NOTES");
  OAException instrMesg = new OAException ("FND", "FND_CANCEL_ALERT");
  
  DialogPage OADialogPage = new OADialogPage (OAException.INFORMATION, descMesg, null, MainUrl, null);
  OK button to send back the values of the PartyID for CO of the ShipperOverview Page.
  System.out.println ("The party ID is" + left); It is displayed.
  dialogPage.setPostToCallingPage (true);
  java.util.Hashtable formParams = new java.util.Hashtable (1);
  formParams.put ("XXParty", out); Part definition ID in XXParty.
  dialogPage.setFormParameters (formParams);
  pageContext.redirectToDialogPage (dialogPage);
  
  
  Partial code in the process asks in the called ShipperOverview Page of the dialog box's OK button
  ====================================================
  super.processRequest (pageContext, webBean);
  Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  String XXId = pageContext.getParameter ("XXParty"); Try to recover part ID here of page of the dialog box.
  System.out.println ("The PartyID is" + XXId);

  Salvation;

  Try one of these two options.

  1. pass the value of the part directly in the URL & get it 2nd co:
  String MainUrl = 'OA.jsp?page=xxksms/oracle/apps/imc/ksms/webui/ShipperOverviewPG&retainAM=Y&XXParty="+Party;

  2. After selecting the button ok in the dialog box get the parameters in CO 1 himself then using URL forward, send them to CO 2

  If (SaveButton! = null)
  *{*
  * //Your code... *.
  *//..............*
  *//............*

  Default OAException = new OAException ("XXABCD", "XXABCD_GNO_DELETE_WARNING");
  DialogPage OADialogPage = new OADialogPage (OAException.WARNING, default, null, "","");
  dialogPage.setOkButtonItemName ("DeleteYesButton");
  dialogPage.setOkButtonToPost (true);
  dialogPage.setPostToCallingPage (true);
  String lineId = pageContext.getParameter ("lineId");
  Hashtable ht = new Hashtable();
  HT.put ("lineId", lineId);
  HT.put ('actor', actor);
  HT.put ("empId", empId);
  dialogPage.setFormParameters (ht);
  pageContext.redirectToDialogPage (dialogPage);

  *}*

  * combination else if (pageContext.getParameter ("DeleteYesButton")! = null) {*}
  String lineId = pageContext.getParameter ("lineId");
  String = pageContext.getParameter ("actor") actor;
  Var empId = pageContext.getParameter("empId");
  HashMap formParams = new HashMap (1);
  formParams.put ("lineId", lineId);
  formParams.put ('actor', actor);
  formParams.put ("empId", empId);
  pageContext.forwardImmediately ("OA.jsp?page=/xxx/oracle/apps/xxabcd/appraisal/webui/DrillDownPG",
  NULL, KEEP_MENU_CONTEXT,
  NULL, formParams, true,
  ADD_BREAD_CRUMB_NO);
  *}*

  --
  GsrC

• I recently started getting the message "error - blocked site" on some sites that use to work. Can anyone suggest why this might be, please?

  I don't have the same problem if you are using Opera as a browser, however, I am aware that ISPS have blocked some sites in the United Kingdom due to a decision of the Court and wonder if it is the cause. The message only started to appear since I read about this decision. Is there a list somewhere that shows which sites are legally blocked in the United Kingdom? I can then excluded of this in or out as the cause.

  Thanks much for any help.

  Concerning
  Chieflx

  Hi beastybell,

  Thanks for the offer, but you don't have to worry to make a video. I can always access sites, so I'm not too worried about changing the proxy settings. I'm glad this worked for you.

  Once again thanks for the help and the offer

  concerning
  Chieflx

• Flex app does not work when moved from the original location

  I'm doing a gallery of images in flex. It works when I run it in Flex Builder perfectly fine. Files html and swf works perfectly well open in any browser too, but ONLY when these files and all related files are open to the default location where the application has been generated in bin-debug folder. When I export a generation to another folder, the swf file loads but no other information from the display of the xml file. I tried to set all paths reference files (that is, the xml language) in the flex application to the absolute exact location on the server, and it did not work when I downloaded it on the server.

  I tried several approaches from scratch and they all arrive at the same question. I work with a teaching for Flex Builder License, I'm not sure if they jip you on those and ruin the compiled swf.

  Help, please! I'm losing my mind on that. I think it has to do with something else, in addition to the code because it works fine when I click 'Run', but if someone thinks it is helps for the zip code let me know.

  Often this is because you must add the - use-network = true compiler option in FlexBuilder menu bar:

  Project - Properties - Flex Compiler - additional compiler arguments:

  Add - use-network = true, and then recompile and post back to the server, should work fine.

  Note: If you create a "Release" version and move elsewhere on your local computer, you may need to add - use-network = true, and then recompile the application to access local resources outside the Flex Builder environment.

  If this post answers your question or assistance, please mark it as such.

• When loading a new site using Firefox, why do I get a message telling me that "firefox prevented this page automatically lead to another page." Allow? »

  When loading a page using Firefox, at the top of the page, I get a message saying "Firefox prevented this page from automatically redirecting to another page - allow? This happens almost every time I start a new page, and Firefox will not allow to continue the download. I tell him to allow every time, even on the pages I have "authorized" by the past.

  Clear the Cache and Cookies

  • https://support.Mozilla.com/en-us/KB/template:clearCookiesCache

  Clear the Cache of the network

  • https://support.Mozilla.com/en-us/KB/how%20To%20clear%20The%20Cache#w_clear-the-cache

  -> click on the Firefox button, then click on Options -> advanced-> general-> remove the check mark from the warn me when Web sites try to redirect or reload the page

  -> Click OK-> restart Firefox Options window

  Check and tell if its working.

• Toolbar of Thunderbird don't watch not the button send, how do I get it back?

  When I go to thunderbird, click on an email, there is no send or forward button and when I go to your 'toolbar Customize zone"unlisted send either?

  Oops. I sent the message for updates and that the answer did not help because my button 'Send' was changed to 'send later' and suggestions had not worked. But I discovered that I was disconnected in some way to the internet and after checking and updating my password, it's all working now. Sorry about that.