HP ENVY 7640: Premium presentation paper

Similar Questions

• HP ENVY 4504: Micron WILL NOT GO BY PRINTER KODAK PREMIUM PHOTO PAPER 280 x240GM

  My HP ENVY 4504 printer will not feed Kodak premium photo paper 240 gms through

  Hello

  First if you please the way you load photo first papers. Have you tried HP papers with the same thickness? Please check your loading process using the following Manual:

  http://h10032.www1.HP.com/CTG/manual/c03784120.PDF

  Kind regards.

• HP ENVY 7640 e-all-in-one: e-mail through mobile phone photo printing. Need to print on photo paper

  New to the forum and new for printer HP (HP ENVY 7640). My question is, if my printer is loaded with paper and photo paper, it automatically by default paper when trying to print photos, e-mail from my cell phone.

  I have to remove the paper from the bin of the printer in order to print on photo paper?

  Hello

  Looks like Yes, you remove normal documents. I ran a few tests on my printer ready 7640 want and he knows the size of the photo paper, that I put (from the screen of the printer), but ONLY 4 x 6 prints.

  Hope this answer your question.

  Kind regards.

• HP Envy 4500: Printing on Photo Premium Plus paper on Envy 4500

  Bought the new Photo Premium Plus paper and I am so frusterated I try to print on this subject!

  I get all the rear bars, especially on the back or cut the wide 1/4 of the image.

  Any suggestions?

  @Nadine63,

  Thanks for getting back to me. After taking a quick glance in the Specifications of the printer under the tray capacity paper, the maximum weight is listed as up to 281gms (75 lb). The one you use is heavier (80 lb) that is why you see the question.

  Let update you the software and drivers to make them compatible with your operating system Windows 10. Please follow the steps listed below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Envy 4500 to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all the software 4500 envy has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your desire to 4500 (DO NOT connect USB until the software prompts you to):

  HP ENVY 4500 e-all-in-One Printer series full feature software and drivers

  6. go ahead and print a test page.

  7. If you are unable to print a test page, run the HP print and scan doctor > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  You can try to start the photo, but I suggest to change the paper first. Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

  I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

  Hey @cmm3,

  Welcome to the Forums of HP Support!

  I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

  Step 1: Load the paper:

  To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

  Step 2: Check the print settings:

  Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

  1. Open Word and click mail merge to top
  2. Select "envelopes" in the upper left side
  3. A page of envelopes and labels should now open. Enter your delivery and return address.
  4. Select 'Options' on the lower right
  5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
  6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
  7. Make sure that you choose the option "Face down".
  8. Also ensure that 'right-hand Rotation' is selected
  9. At the bottom of the window, select the drop-down list of pet food
  10. Make sure that the feeding method is set to main tray rather then select automatically
  11. Press 'OK' and 'Print'.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• ENVY 7640: Print dark Photos

  Using HP Premium Plus glossy paper and HP print cartridges. Photos on my Mac are crisp and great colors. Diagnostic print quality test indicates no defect. When I print photos, the photos are more dark and muted compared to pictures on the Mac. Is it possible to fix this problem?

  Hi @nhuser1,

  Welcome to the Forums of HP Support!

  I see that your photos are print darker than expected on your HP Envy 7640 printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you performed the test of diagnosis of quality, to see if the problem was related to the printer. Looks like the printer is fine, but I would try to copy a picture.

  Please see this guide for instructions : 

  • Copy of Documents or Photos with a HP ENVY 5640 5660, 7640 e - all - in - one, HP Officejet 5740 and 8040 e - all-in - One Printer Series

  Copy the document or photo

  Use the menu to copy on the printer control panel to select the copy settings and start the copy job.

• I have a MacBook Pro, who hates contact my HP Envy 7640 printer all-in-one. Printing can take as long as 10 minutes! If it prints at all! Does anyone have similar problems?

  If I use my iPad to print a photo there is no problem, but if I use the Macbook for the same function, it will be either print it after a long period of time or he'll quit and say "Printing cancelled!" It seems that these problems started after the update. I am running El Capitan 10.11.6. In addition, when you use Hallmark Card Studio for Mac, as soon as I use two back, it will print the first side no problem and then he hangs up and ends by spit the paper without printing the second side! When I got to the printer, everything worked fine, but now...

  Maybe:

  e-with-OS-El-Capitan/td-p/5417344 http://h30434.www3.HP.com/T5/Printer-Software-and-drivers/HP-Envy-7640-compatibl

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• E HP Envy 7640 All-in-One-Sanchez: now, I have my documents stuck in the queue and I can get out. Help! I hate this printer...

  Whenever I change the paper (photo paper) when I get back to paper ordinary, it is immediately past offline or it gets stuck in the queue.  Now it is stuck in the queue.  Is it possible to get this printer to print without all these problems.  I am extremely illiterate on computers and this crazy.

  You helped me with "off connection" now can help you with this problem.  Thanks for the help, I really appreciate it.

  Hello @Sam141, greetings!

  Welcome to the HP support forums. I'd love to help you with your printing problems with your printer Envy 7640.

  I understand that you are a new user with this printer, that's why I suggest using an automated tool to correct this and many other common printer related issues.

  Go to http://hp.care/2bZ9w2q to download and install HP print and scan the doctor. This tool will be quickly and automatically perform several tasks resolution known problems for this problem. You can save this for future issues you can still.

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Envy 7640: Printing photos

  I am trying to print photos using the main tray with plain paper and it will not be printed.  He tells me to load paper into the photo tray.  I've tried which as well and it still does not.  But I want to print from the main tray.

  Hi @TRG8,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP ENVY 7640 e-all-in-one printer with a Windows XP computer and you were trying to print photos from the main tray on plain paper, but the software tells you to load paper into the photo tray, which you did, but it still does not work. I would like to help with that.

  It looks like a problem of printer settings as perhaps you do not have the main tray selected as the input source, but try to download and run the HP print and Scan Doctor to see if everything is OK with the drivers and the software of the printer.

  If the HP print and Scan Doctor detects no problem, it is perhaps a matter of settings. Here is a document of support that can help ensure the setting of the impression are set the way you need them - Print Photos. On the Paper Type/quality tab, that you want to make sure that the main tray is selected as the Paper Source, or Photo tray if you want to print on photo paper.

  Please let me know if that solves the problem, or if you need assistance.

• HP Envy 7640 e-all-in-one Seri: HP Envy 7640 does not print

  Printer locked up - line said that the printer's paper (not) and it was offline (no). I unplugged, restarted the computer and the printer. Followed all the basic troubleshooting tips and stupidly the suggestion to reset all printers. Big mistake, now zero printers happen when I try to add. The search option does not either. Is it my computer? I don't think so. This is a NEW printer - printer only a dozen or so articles. Help, please!

  Welcome to the HP community @ellumare,

  I read on your desire 7640 does not although you receive an "Out of Paper" error, the printer showed as 'offline' and currently cannot add printer on your Mac with 10.7.

  Here's what I would recommend. Try troubleshooting the equipment first, because if there is a problem with the unit, this will lead to software problems and troubleshooting cycle can get tedious.

  1. power reset the printer and make sure the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  2. try to make a copy of the front of the printer. If the work of copies successfully, go to step 3, if the copies do not work, tell me what happens when you try to make them as there is most likely a hardware problem.

  3. from your Mac:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click on this link to download and install the full features and software driver: HP ENVY 7640 e-all-in-One Printer series full feature software and drivers
  5. Print from text editing and other test applications and also try to scan from HP Scan/HP Utility.

  I hope this helps, and I hope to hear the result!

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

• HP envy 7640: can Hp envy 7640 print with card stock?

  I'm supposed to create maps for homework and I have a hp envy printer 7640.  I wonder if the printer will be able to print on card stock.  If so, please help me on how to implement. Thank you.

  Hey @KateAnderson,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you're looking to print cardstock with your HP ENVY 7640 e-all-in-one printer.  I would like to help.

  For your information, here are specifications of your printer for card stock manipulation:

  Supported cards

  To avoid jams paper and other issues, make sure that you use the right type and size of the sheets or cardboard when loading the paper tray.

• HP Envy 7640: HP Envy 7640 does not copy the all-in-One

  I have a variant of other posts on this site.  My desire 7640 doesn't copy, either on the glass, or through the feeder directly but only if it has been idle for some time.  I get the message that it is scanning and paper feeds, but the wheel just spins and nothing to copy.  However, if I then turn off, restart and then try and copy, it works fine.

  I downloaded the drivers the most recent (February 3, 2015), so I think I am up to date.  Moreover, when I download the drivers, it seems to install on my Mac - that somehow 'transferred' to the printer itself?  The reason why I ask, is that if you copy something, there is no interaction with the Mac (that I know of) and I want to make sure that the printer has made more recent drivers.

  Any ideas?

  Thank you!

  Chris

  Hi @silgec,

  Welcome to the HP Forums!

  I noticed that your HP Envy 7640 won't copy. And I'm happy to see it for you!

  First of all, I would make sure that the printer power cable is connected directly to the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Then check that the printer firmware is up-to-date, browsing through this guide, get the latest Firmware and updates.

  Let's start with the following steps, and we will see what happens!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Envy 7640: HP Envy 7640 will not print photos from the photo tray

  I bought a HP Envy 7640 today, 11/05/2016.  It will NOT print photos from the photo tray.   The printer has paper in all trays, but keep taking 8 1/2 x 11 paper rather than photo paper.  I use the default application for the display of pictures (Microsoft Office 2010) and have tried selecting both the 4x6in of the index card. and sizes of 4 x 6/10 x 15 cm.  The end result is the same, an image printed in the middle of the plain paper.  I searched the forums and found that two related threads.  Given that I just install the printer today, I figure there will be newer drivers in the last hour, so I finished downloading "printing HP and Scan doctor."  He finds a "Match of Port issue" and that fixed it, but when I printed another picture, he was still on plain paper.  If I remove the paper and leave only in photo paper, the printer throws a fit and said that it is out of paper.  Any ideas?  I'm not a newbie, but in more than 20 years of use of HP products, this is the first time that I had to fill out a problem for a Board of Directors.  (And with the instant the ink program, it starts to accumulate the number of my printing without a single success.)

  RESOLVED - photo, once you select the printer & paper, you must go into OPTIONS, then the properties of the printer, then go to the paper/quality tab, then the paper Source and select manually the specific bac (bac/Photo main tray).  Sheesh, should we not automatic as soon as you select the paper size?

• HP Envy 7640: Problem selecting a page scanned in on a HP Envy 7640

  I'm on Windows 10 and have a HP Envy 7640 printer which I use for scanning. I was able to scan documents and photos. I have the latest drivers installed.

  My question is when you scan a document of several pages how to choose to work on a single page. For example, if I scanned in 5 pages, how can I go back and delete page 2? In the lower left corner is select it all and deselect a button. But the button deselect Disable all pages and select it as all button selects all pages. I want to choose only a given page to work on.

  If I scanned in 5 pages and the last page I want to rotate, rotation turn button as all 5 pages not only on the last page.

  I before I was on Windows Vista with this printer and scanning software made it easy to work individually with any already digitized in page.

  Hello
  
  Thank you for using the HP Forums.  You mentioned that you have installed the drivers, HP FULL feature software driver?
  
  If this isn't the case, you can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Concerning your questions about scanning, followig resources will be able to help:

  Scanning for Dummies
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quick-guide-to-your-scanning-needs/m-p/5625126

  Watch the videos of "Scan multiple pages.
  
  Hope that helps.