I have a problem with billing. WHO SHOULD I TALK TO?

Similar Questions

• I have a problem with a Gamehouse game. Talked to them and they say that it is a problem of compatiablity with Vista.

  I have a problem with a Gamehouse game

  Talked to them and they say that it is a problem of compatiablity with Vista. It's Super Jigsaw Puzzle and I the hours worked in several puzzles and now when I try to go inside he closes Super Puzzle. This is frustinating because I've uninstalled and reinstalled the program 3 times, it does not help. Is that what I can do to fix this problem in Vista? I have all the updates except IE 8.  We like IE7, but all the other updates sent we have.

  If it is a program downloaded and installed, read this:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a problem with error 53.I know this mistake is for people who have their iPhones fixed by a third party before, the thing is my iphone 6 was never taken to a third party before, so all opinions

  I have a problem with error 53.i have 6 + and I m out of warranty. I know this error is for people who have their iPhones fixed by a third party before, the thing is my iPhone 6 + was never taken to a third person before, error 53, it isn't my fault .i was going to do a upgrade to the new version

  All view of what can be done

  If your device is outside its warranty, you can always make an appointment at the Apple Genius Bar to have the studied unit. 53 error will also occur if there is other material errors that are not defined on the device. One of them has to do with contact IDS. Your Touch ID was never working, or did it stop working? Have you had damage to the device by dropping, water damage or damage to the 'home' button?

  Apple can examine the device and determine your options. You will also be flooded with other options for independent repair facilities, however before turn you to this, understand that their work on your device will void any support post-warranty Apple, and there is no way of knowing that the qualities of these repair facilities, as they are not certified by Apple, as Apple does not certify independent repair facilities. If you decide to go this route, be sure to only find a way to check the reviews, etc..

• Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Hi judithl34724699,

  If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf

  Also try to use a different file type.

  Thank you

  Abhishek

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek

• Flash does not. I downloaded the new version of Flash. However, it does not work with Firefox. We continue to request to download the new version of Flash. I have no problem with IE, Chrome or Safari. What should do?

  On several occasions, I have installed the new Flash Player. However, when the use of Firefox continues to ask Web sites (e.g. maps.google.com, etc.) to download the new Flash Player. I did so completely and repeatedly and restarted.

  I don't have this problem with other browsers.

  There are 2 versions of Adobe Flash; an ActiveX version for IE only and a plug-in version for most of the other browsers like Firefox. On a Windows system, you must always update both individually. You don't have the Plugin version installed for Firefox, if you did, you will see "Shockwave Flash" in the Add-ons > Plugins.

  1. With Firefox, click the direct download link below and SAVE the download on your desktop, so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
  2. When the download is complete, close Firefox (file > button OR exit Firefox > exit)
  3. Click or double-click the file that you just saved on your desktop
     • In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
     • The button 'Install' in the lower right corner is now highlighted, click it.
     • Installation is quick.
  4. Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
  5. ActiveX for IE onlydirect link version: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• "Windows services Centre" call by saying that I have a problem with my internal security system

  Hello

  I received a phone call from 'Windows Service Centre', James Henderson, employee of 406-235-1159, phone number #7098 (Yes, that's an indication 406 and 416 - which is one of the reasons why I'm suspicious), but gave a speech in Mississauga (Ontario), saying that I have a problem with my internal security system and even if www.ammyy.com I need to talk to the technician to solve this problem. I do not trust him and hang up, but called the number, responded to the same person (as he had an Indian accent with a lisp in addition to this) and he said that Joseph and not James!
  Scam or what? Thank you

  It is a scam! Who is becoming extremely common and was even on the news in some places. As long as you don't give them any personal information, you should be fine. Should they call once again, simply hang up.

  See the recent thread below for more information; Shenan Stanley and the spirit of the messages contain very useful information:

  The call tech support?
   http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/tech-support-calling/3a07ee4a-cb7c-4F6E-bfa2-5f7067346859

  The links below contain excellent information regarding this and other scams:

  Avoid scams to phone for tech support
   http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Avoid scams that use the Microsoft name fraudulently
   http://www.Microsoft.com/security/online-privacy/msName.aspx

  The site ammyy.com offer legitimate a service to help users to connect remotely to other computers; the crooks simply operate these services. This is the first time I have heard of this site, seems most of the fraudsters a different use.

  Kind regards

• I have a problem with the active WiFi Seagate GoFlex TV Media Player asking for a net user ID and a password.

  Original title: Net User ID & Net password

  After the upgrade from Vista to W7-64 CV, I have a problem with an active WiFi Seagate GoFlex TV Media Player asking for a "Net User ID & Net password" to log.  I used all imaginable combinations of IDs & passwords, but they all lead to logon fails. I'm almost certain that it is a W7 security problem because others with the same players who went to W7 face the same problem.  I found many supposed fixes online, but none works.

  I am aware that MS W7 works as it should and Seagate is not their problem, but if anyone can recommend a change of security to help this issue, I guarantee a pass towards the sky.

  PS: All the sharing, etc. continuously.  are installed as they should be.

  The only reference to Net User ID and password I can find is on page 46/47 of the User Guide. If this is not the user name and password of the Windows account that you want to share files with, I don't know what it is.

  I guess patches that you tried to include those that are mentioned here:

  http://forums.Seagate.com/T5/FreeAgent-theater-and-GoFlexTV/logon-fail-home-network-Windows-7/TD-p/70540

  I would have suggested the registry change.

  It might be worth checking that you have the latest firmware, just in case.

  http://knowledge.Seagate.com/articles/en_US/FAQ/216931en?language=en_US

• I have a problem with a card being inadmissible for the zoom on a phone.

  I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?

  Please provide more details, as if the card is integrated an image or a real map generated by widget.

  The generated plan must zoom in/out.

  Thank you

  Sanjit

• Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

  Hi, I have a problem with a basic movement scroll effect.

  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

  Please note that I am new to dream, this is my first project ever.

  My idea is as follows:

  When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

  so...

  now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

  now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

  now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

  When I scroll the WHOLE grave logo down... well.

  NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

  so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

  the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

  NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

  THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

  BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

  short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

  But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

  Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

  Thank you very much to everyone who reads this message and tries to help him...

  All the best,

  Niki Lapan

  I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

  https://www.mediafire.com/?xiild0yhr5cna7s

• I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious.

  Hello.
  I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
  I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  If the problem persists in Mode without failure, could reinstall you Firefox in this way:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• Incompatible program, I have a problem with my ancestry Family Tree Maker program 2012

  I have problems with my ancestry Family Tree Maker 2012 program.  I have contacted ancestry and have tried everything they suggested a fix.  Maybe they thought THAT FTM crashed in windows.  When I click on the FTM icon on my desk a message appears indicating that FTM was badly closed the last time.  He suggests to compact the file, but I can't get open FTM to do this.  The message keeps telling me that Windows has detected a problem and he'll let know me if a solution is found.  When I right click the icon FTM the menu has "inconsistent application" at the top.  When I used the resolution of Windows problems he also indicated an incompatible application.  FTM was working great for me.  Inproper closing was caused by a power failure while I was with FTM.  My computer is a lot of work and is common to the updates being FTM.

  Amy

  Hi amyandre.
   
  Welcome to the Microsoft community. According to the description of the problem, I realized that you have a problem with the delivery of the program Family Tree Maker 2012. I would ask to send us additional information as indicated below to help you better.
   
  1. what version of Windows are you using?
  2 have you made changes on the computer before this problem?
   
  If you are using Windows 7, I suggest you to try these methods and check the status of the issue.
   
  Method 1:
  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.
   
  Method 2:
  Uninstall and reinstall the Family Tree Maker 2012.
  Uninstall or change a program.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 3:
  Install the   Family Tree Maker 2012 compatibility mode.
  Make older programs run in this version of Windows.
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  If the problem persists, I suggest you to contact the program support.
   

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• I have a problem with the history of Bing. I clear the history and turn it off. Later, when I use bing history is preserved and turns.

  I have a problem with the history of Bing.  I clear the history and turn it off.   Later, when I use bing history is preserved and turns.  How can I keep decommissioned and erased history?  What a Bing, IE8, Microsoft problem?

  Hello

  1. is the question confined to the history of Bing?

  2. what web browser do you use?

  3. If you are using Internet Explorer, which r version of Internet Exploreris installed?

  If you are using Internet Explorer 8, it gives you the option to automatically remove your browsing history each time you quit the browser. The type of data that is deleted is dependent on of which options are checked in the delete browsing history.

  one) to set up IE to delete browsing history on exit first click on the Tools menu, located to the far right of the tab of your browser bar.

  (b) when the drop down menu appears, select Internet Options.

  (c) click the menu Security , located to the far right of the tab of your browser bar. When the drop down menu appears, select the option delete browsing history... .

  (d) the window delete the browsing history should now be visible coming to overlap your main browser window.

  (e) check the options you want to remove and click OK.

• I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe.

  original title: problem with file ntsd.exe

  I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.

  Hi JohnABuckley,

  • Are you facing any problem on the computer?

  Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.

  As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=us&docid=20100824120155EN&product=home&version=1&PVID=f-home