I have an Acer Aspire 5735-4774 laptop which runs Windows Vista. Whenever I close my laptop, my computer restarts its self.

Similar Questions

• I have an Acer Aspire 5542. Since I was Windows 10 MyWinLocker Yo-Safe will not open.

  Hi, I have an Acer Aspire 5542.  It came with Windows 7, and had MyWinLocker Yo-Safe pre-installed.  Since I upgraded to Windows 10 MyWinLocker Yo-Safe will not open.  After I entered my password in the window of MyWinLocker Yo-Safe he said Yo-Safe is open in a small window pop up at the bottom right of the screen, but Yo-Safe will appear in the window of this PC, and the overview of the tray icon still says it is closed.

  I found the answer: open an administrator command prompt and then type in: sc mwlservice start

• Wireless connection drops after 10-20 seconds on Acer Aspire V3-572 - 56T 3 running Windows 8.1

  I have big problems with the network connection Wireless at the office. He sees the network, allows me to enter security credentials, then connects (with connectivity internet confirmed) but gave up after 10-20 seconds. I tried the wireless network to a friend who worked ok without interruption, is certainly nothing wrong with the hardware. I use a brand new Acer Aspire V3 - 572 - T 56, 3 on Windows 8.1, with all the latest drivers/patches loaded and tried to juggle with many advanced settings for the card of network without success. I connected the router to make sure that all the settings, encryption standards, channels etc was corresponding, but the problem is persistent. It has been going on for two days now and is driving me crazy because I really need to work in the office with wifi band. Plug an ethernet cable directly into the router works fine, but it is not the ideal solution (and poses a danger OH & S that he throws on the ground). Can someone help pleeeease!

  FYI, I ran diagnosis several times & the only thing that stands out was the following:

  Diagnostic information (wireless connectivity)
  The Association status: 0 x 00038002 failure
  Association reason code: 0x00000002

  Result of diagnosis: problem found
  Question: RNWF MSM Helper Class
  Root cause: Windows could not connect to "ERICSSON".
  You can try to connect again.

  Result of diagnosis: problem found

  Root cause:
  Failed to bind wireless to "ERICSSON".
  An answer is not from the router or access point.

  Detailed root cause:
  Failed to bind to this network wireless. Windows has not received response from the router or access point wireless.

  Repair option:
  Search for the causes of the low wireless signal quality
  The signal is weak because of the distance or interference.
  Windows Help and Support can provide more information on this problem.

  No need, already has the solution (which worked for me):

  The fix!
  (This is for windows 8.1)

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Right click on the Windows tile in the bottom left of the taskbar.
  -Open Device Manager.
  -Expand "network adapters."
  -Right click on your "Broadcom 802.11n Network Adapter.
  -"Update driver software".
  -"Browse my computer for driver software".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -"Let me pick from a list of drivers for devices on my computer.
  Uncheck "Show compatible hardware".
  -Scroll down on the "Manufacturer" for "Broadcom" Panel and select
  -Scroll down on the "network card:' and find"
  "Broadcom 802.11 Multiband Network adapt."
  -Select, and then click "next".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Say yes to the "put to update driver Warning"
  -Close and you should be able to connect with elegance.

• also. I have an acer aspire I wish to set. running vista. e recovery is in poor condition. you want to restore to factory settings. no password...?

  all about

  N °

  We can not help you with your forgotten password problems or eRecovery.

  Contact Acer and ask them about eRecovery, because it is their software.

  http://support.Acer.com/us/en/default.aspx

  And ask them if they still have the Vista recovery disk for your model

  http://us-store.Acer.com/RCD/

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have an Acer Aspire 5100 but my orbicam built-in to my laptop stopted work.

  Acer Orbicam has stopped working

  Hi, I have an Acer Aspire 5100 but my orbicam built-in to my laptop stopted work. Can someone help me?

  Hello

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the Microsoft Fixit tool and check if it helps:

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Try to install the latest drivers for webcam on the Acer support site and check if it works.

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=44

  Note: Be sure to select the operating system like Windows XP before downloading the drivers.

  You can also check with the Acer support for all known hardware related issue:

  http://support.Acer.com/us/en/default.aspx

• Where can I find specifications for Acer laptops to upgrade? I have an Acer Aspire one

  Hello

  Where can I find specifications for Acer laptops to upgrade? I have an Acer Aspire One, which is still under Windows XP.

  I looked on the website and check the manual with no techinical inside info.   I'm not find respect for this netbook.

  Can someone identify the info.

  Thank you

  T

  Hello Tom,

  You can watch this video. The AOD250 have the same specifications as (same motherboard with Intel Atom N270 processor).

  I suggest you to upgrade the memory to 2 GB:

  KN.2GB09.003	SODIMM.2GB.DDR2 - 667.LF (ELIPIDA)
  KN.2GB0B.011	SODIMM.2GB.DDR2 - 667.SAM (SAMSUNG)

• I have two Acer ASpire laptops. They are totally frozen because of the virus. I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement. I have to rebuild my laptop.

  I have two Acer Aspire laptops.  They are totally frozen because of the virus.
  I lost the recovery of Windows Vista Ultimate Edition disc, where to get a replacement.
  I have to rebuild my laptop.

  Hello

  No - what are the two Acers come with a recovery disk?

  If this is not the case, one of them would have a recovery partion, which specifically is to reinstall the operating system on it.

  With an Acer, you press Alt + F10 at startup to start the recovery process.

  All data are lost when you do the above.

  And for the lost disc, contact Acer and ask them to send you recovery disks.

  They do that for a small fee:

  http://us-store.Acer.com/RCD/

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have an Acer Aspire laptop with Windows 7. I have a problem. My "new folder" button does not work.

  I have an Acer Aspire laptop with Windows 7.  I have a problem.  My "new folder" button does not work when I am on a page blank and do a right click on the page I get only breifcase and no new folder option. How can I fix?

  See this thread and respond to Bruce Hagen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Hi-Im-having-a-problem-creating-folders/621c5cd4-29ac-4549-a80b-4f78fe3917aa

• I have an acer aspire 6935 laptop and it wont let it says me my password is wrong is there a way I can cange it without having 2 consider 2A shop___

  I have an acer aspire 6935 has he locked me he says my password is wrong I can fix it without taking it to a store

  Hello jean27,
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please see the sticky below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• I have an Acer aspire 473 v5 which is not turn on or charge there is no light showing

  I need help, I have an Acer aspire 473 v5 which is not turn on or charge there is no light showing.

  I was playing League of legends about this yesterday while he was in charge, then the screen flashed and he died now, it won't work please someone help me I don't know what happened

  don't worry I took my laptop to a local difficulty
  It should be fixed soon

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• Windows 7 screen flickering on computer Acer Aspire 5920 G laptop

  I have an Acer Aspire 5920 G computer laptop with an nVidia GeForce 8600 m GT graphics card. After I installed Windows 7, my screen flickers every now and then (randomly, but all other minutes). I used the driver provided by Windows Update, that provided by Acer and the latest available on the nVidia site. The problem still exists. Hardware failure is excluded because it wobbles never on any other operating system.

  Thank you!

  http://antondnagy.WordPress.com - http://www.twitter.com/antondnagy

  Unfortunately, no work around worked. I have it corrected by uninstalling all instances of the driver, download and install the Windows Vista drivers Acer display. Everything is OK now, as weird as it sounds! http://antondnagy.WordPress.com - http://www.twitter.com/antondnagy

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  You can buy or download a copy retail Microsoft windows and install it on your computer.

  You can download and install the device driver windows for your computer to Acer support website.