Windows 7 screen flickering on computer Acer Aspire 5920 G laptop
I have an Acer Aspire 5920 G computer laptop with an nVidia GeForce 8600 m GT graphics card. After I installed Windows 7, my screen flickers every now and then (randomly, but all other minutes). I used the driver provided by Windows Update, that provided by Acer and the latest available on the nVidia site. The problem still exists. Hardware failure is excluded because it wobbles never on any other operating system.
Thank you!
http://antondnagy.WordPress.com - http://www.twitter.com/antondnagy
Unfortunately, no work around worked. I have it corrected by uninstalling all instances of the driver, download and install the Windows Vista drivers Acer display. Everything is OK now, as weird as it sounds! http://antondnagy.WordPress.com - http://www.twitter.com/antondnagy
Tags: Windows
Similar Questions
-
my computer acer aspire v5 installed windows 10 of its own accor is about 2 weeks. up-to-date as the taskbar has disappeared from the bottom of the computer, I get the message error 2018375670 system, which can do it, I can't access anything on the computer
Hello
Here is the Vista Forums, you send messages to.
Vista doesn't do not part of the update free Windows 10, so 10 would not settle.
The free update is for 7, 8/8.1 and 10.
See you soon.
-
Continuous beep sound from my computer Acer Aspire 7540.
Original title: his record game
I get a continuous beep from my computer Acer Aspire 7540. How can I stop it except turn off the sound.
Hi G V Palmer,.
1 did you recent hardware or changes to the software of the system?
The system beeps are so important that it indicates system errors and warn you against system damage. When the processor system or Random Access Memory (RAM) or hard drive is not working properly, it will give the alert system using the beep.
I recommend you to check if the RAM and hard drive work properly.
You can also change the pattern of its Windows as 'None' and search for the question.
a. Click Start, click Control Panel, and select sound.
b. in the sounds, iselect 'No Sounds' tab under sound scheme, click Save as.
(c) in the Save Project dialog box under, type a name for the new sound scheme.
The new scheme appears in the model box sounds.
Check if you are still having the tone.
For more information, you can consult the following article:
Change the sounds of the computer
Hope this information is useful.
-
I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 comes up... all clues?
Hello
1 are there any changes or updates made on the computer before the show?
2. you try to add a network printer?
3. What is the full and exact error message?
4. when exactly you get the error message?
5. What is the number of brand and model of the printer you are trying to connect?
Method 1:
I suggest you check out the link and try sharing the printer:
Share a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer
See also:
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Method 2:
Check out the links and check if that helps:
File and printer sharing: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions
Troubleshoot file and printer sharing
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing
-
Hello
I installed windows 10 x 86 business on my Acer Aspire switch 10F, because there were 10 x 86 host windows install before and I couldn't get into my computer in the domain. Now, the computer is in the domain, but I have problems with drivers. I tried to install all the drivers that are on the site acer for my Acer Aspire switch 10F. And then I did the windows updates, but I have 2 drivers that do not work is the one whose name is "Kionix sensor Fusion device" and the other whose name is 'Micro Capella CM3218x ambient light sensor. Without these drivers, I can't activate the automatic rotation for when I want to use my device in the form of tablets and I can't use the automatic brightness for display.
can someone help me please? Thank you.
Sellion
The answer of the Acer support is that this computer is not done for the company and it will never be drivers for the HOME version of windows 10 x 86 version.
-
my computer (acer aspire) Windows 7 does not have the Dell 924 printer driver
I tried a multitude of ways to download the driver on the Dell website, but nothing helped. I am at a loss now what to do next.
Dell provides only up to Vista 32 bit software/drivers for this model, your Acer uses win7 64-bit?
-
I'm trying to find a solution to the problem. I tried including virus cleaning disc and other analyses, but I continue to have these problems. This problem did not begin until recently. I restored to a restore point previous to the first time it happens, but its still on me once again. any help would be helpful, thanks.
Hello
Control Panel - Power Options - Choose top left - close cover.
Also, check the settings of Plan change for power Plans and Advanced Options for each.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows Vista reinstall without installation disc (Acer Aspire 6920 G)
Hello
I would like to ask for help. About a year ago I bought this laptop with the original Windows Vista validation but key without a Windows Vista installation disc. Now, I would like to reinstall my system.
I downloaded the file .iso Windows Recovery (of size 120 MB), it burned down and tried to reinstall Windows. I got to the stage where I type the validation key, but always when I typed that key, it appeared that the key is invalid (I checked this certificate stuck on the laptop and it seems to be original).
Thanks in advance
This is NOT a Vista reinstall the drive, it's a record of STARTUP repair!
Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition t put it back to factory settings.
There is no Vista free download legal available.
https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11, Acer is normally Alt + F10 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
Screen flickering on nine Acer Predator G9-791
I just bought a brand new Acer Predator G9-791.
I installed the default mode, that is, he did it himself. It has 10 Windows Home. I upgraded to Pro.
I added some software, I have need of development, Visual Studio and SQL Server.
Most early I noticed that the screen goes black and then comes back very quickly, apparently at random times. The "blink" lasts only a fraction of a second--as if the GPU resets something.
The problem happens as quickly after the other, making it difficult to use the laptop. Sometimes a whole day passes with nothing happening.
I noticed that when it happens, by moving the mouse over an object that reacts overview by painting a small area seems to curb the problem.
I'm having a problem of material here? I buy a faulty laptop?
It was almost the most expensive out there, so I would like it to work.
You can try to install this driver on the Acer support site?
-
have vista on acer aspire 5920 and my windows will not start, I can't and starts to panic
I hope you can help when I try to correct this go proplem problem event name: startuprepairV2 as well as a list of names, but when I go to start windows normally coming to a blue screen with a code saying
Technical information: * STOP: 0 x 00000024 (0x86DF3C80, 0XC000102, 0 x 00190444, 0 x 0000000)
Hello
Remember to make changes to the computer before the show?
Stop: 0 x 00000024 usually occurs for the following reasons
1. the structure of the partition or file system is damaged.
2. a driver compatibility problem exists.
You can run CHKDSK from Windows Recovery program and check if it helps.
Warning: We recommend that you perform a full backup before implementing these steps.
To run the CHKDSK (Chkdsk.exe) program, follow these steps:
(a) use the Windows Vista DVD to start the computer from Windows Recovery (WinRE). For more information on how to start the Windows recovery, refer to the Microsoft Web site at the following address:
http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx (http://windowshelp.microsoft.com/Windows/en-us/Help/f768809f-ed90-415f-a83f-89b42108b3551033.mspx)
(b) in WinRE, open a command prompt. To do this, follow these steps:
· On the Install Windows screen, select the language to install, time and currency formatand keyboard or input method options and then click Next.
· Click repair your computer.
· Click the Vista installation you want to repair, and then click Next.
Note Click load drivers only if you need to load a driver to access a hard drive.· Click command prompt.
(c) at the command prompt, type the following command and press ENTER:
CHKDSK: / r
Note In this command, is the hard disk where you want to install Windows Vista.
(d) If Chkdsk.exe does not and does not repair errors on the hard disk where you install Windows, run Chkdsk.exe on other NTFS hard drives on the computer. To check the partitions that are configured on the computer, follow these steps:
- . At the command prompt, type the following command and press ENTER:
DiskPart
- At the DISKPART prompt, type the following command and press ENTER:
Flight list
Note the hard disk information that is returned.
- At the DISKPART prompt, type the following command and press ENTER:
output
- At the command prompt, type the following command and press ENTER:
output
I hope this helps.
-
I've had the computer alittle more than three years now. He began to close in on its own all recently. I noticed the Tower Gets and still accellerated before turning off.
Hello
Accellerated? You don't know how to tell you that?
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
To be able to remove ALL and reinstall all the cables (both ends), card and memory - in fact remove and
replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
fans of work (before and after opening the case).This sounds like material so if the above does not help you then probably need the help of a
real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
Support from the manufacturer.===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html=========================================
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
could someone help me please?
Hello
1. what happens when you try to install the VGA?
2. you receive an error message?
3 - is an installation problem only intel VGA or also with other applications?
Follow the suggestions and then check out.Method 1
Download from the link below and check if it works very well.
http://www.Acer.co.UK/AC/en/GB/content/drivers
Method 2
Check to see if the problem exists in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual -
Acer aspire 5920 Windows Vista Home
I have an acer 5920 on widwows machine family premium, the file to widows seems to have corrupted, which to my knowledge needs to reinstall Windows - as advised by the guys at microsoft, I don't have a recovery disk... What are the options I have, how do I get the recovery dics so that I can rectify the error
I have the product key on the back of my laptop...
see you soon
Hello..
Please try password 000000
-
installed windows 7 64-bit on the Acer Aspire E5-573 but drivers for WiFi, VGA is not found
I installed windows 7 64-bit Home Basic but drivers for WiFi, VGA is not found on the Acer site.
When installing driver VGA of Windows 8.1 of intel Acer site for E5 - 573 on windows 7 64 bit OS then camera photo and graphic development works but USB ceases to function, another camera doesnot work.
Customer service Acer told me that it will support only simple windows version 8.1 Professional and non-windows 10.
Please suggest drivers for WiFi, Bluetooth, VGA etc for windows 7 64 or 32-bit.
1 Atheros QCA9377
https://www.Atheros.cz/Atheros-wireless-download.php?chipset=104&system=5
Click on the "click to Download" and wait until the download starts
2 Intel Management engine
Try this
https://Downloadcenter.Intel.com/download/24499/Intel-me-10-management-engine-driver-for-Intel-NUC
or this
https://Downloadcenter.Intel.com/download/22093/Intel-me-8-management-engine-driver
3. realtek card reader
-
Windows Vista does not start on acer aspire 5050 laptop
Take it the computer forever to market - said to start the recovery mode, takes forever, when it comes to turning it back on, it stops. Now computer laptop won't turn off.
Hello
Here is the information of Acer eRecovery.
http://Acer.custhelp.com/app/answers/detail/A_ID/2631
If this does not work, contact Acer.
See you soon.
Maybe you are looking for
-
After your update about two days ago, it contained spyware WEBGET... as an add on... I had no idea was being installed.It took a while to understand how to remove it.Just an info
-
So I can not print just 1 of 5 pages. The default, 1-5, will display all 5 pages. The 2nd field cannot be changed, possible in previous versions of FF, 1 of 1. Therefore, I can print only all 5 pages, 2-5, 3-5, etc. WTF - I keep losing the print pape
-
Last night, I used my mac and safari looked perfect, but this morning when I turned it on Safari was not load any page correctly, but if I use Google Chrome loads everything the way it is supposed to. Anyone know what is happening and how can I solve
-
Toolbar not accepting only not the extensions icons
Hello, I ran FF3.6, but I want to try the latest version. Didn't like it then returned to 3.6.24 (latest version RoboForm v6.10 worked with). But now the extension icons are more on the toolbar. Those I have who has already shown in the toolbar is: V
-
Hi all I can't access some Web sites. It doesn't seem to be something wrong with the wireless adapter, it says that it is connected to the router and Internet. I can stream music to my smart TV via the wireless router. I checked with my ISP and there