I have an error code 80070020 on I / E scripts error while updating my software a/c, pls advise

Similar Questions

• Error codes: 80070020 and A 80071, 90 (cannot install updates)

  Cannot download and install updates

  Hi joysieq,

  1. When was the last time you were able to install the updates successfully?

  2. do you have security software installed on the computer?

  Method 1

  This problem can occur if a program interferes with the automatic update process. For example, using the real-time scanning antivirus programs may interfere with the automatic update process.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Method 2

  If the previous step fails, then check out the Microsoft article and try the steps mentioned below.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 5531Just bought to win 8 system and I have an error message that this software is not supported

  HP can provide software for a victory. 8 System 8.1

  Here is the driver full features and the link of the Windows 8.1-compatible software for HP 5531:

  http://ftp.HP.com/pub/softlib/software12/COL47810/MP-115828-3/EN5530_1180.exe

• Error while updating cube

  Hi all
  
  Does anyone know what means this error?
  
  < SolveStatistics
  IS_EMPTY = 'yes '.
  CHANGED_RELATIONS = "yes" / >
  < ERROR
  TEXT = "XOQ-00703: error running OLAP DML command & quot;" (SYS. AWXML! R11_AGGREGATE_CONSISTENT('TEST.) CUBE' ' TEST. FIX. AGGREGATIONDEFINITION' ' TEST. QCOUNT. (MESURER ' «P0»): ORA-00600: internal error code, arguments: [seq idx xsps too small], [1017], [], [], [], [], [], [], [], [], []]
  ) & quot; "/ >
  
  
  Refresh of the cube was fine when I update AWM, but not with the error above when I ran refresh cube using DBMS_CUBE. It was a failure when it tries to solve higher partition partition P0.
  
  Any idea?
  
  OLAP version: 11.2.0.2
  
  
  Thank you

  I think you have put

  BUG 9007426 - AW BUILD CARS GETS [XSPS IDX SEQ TOO SMALL] ASSERT

  This bug occurs because the code assumes that a SEQUENCE will always increase in value, but this is not true for a CCR environment. Because random, jobs are sent to the various nodes, you can either can not hit argue it on any given cube accumulation.

  The solution is to run the following as sys. This will force the correct SEQUENCE of increasing even in a CCR environment.

  ALTER SEQUENCE sys.psindex_seq$ ORDER; 
  

• How to fix 'Version 1.0 already exists.' error while updating your app

  Hello

  Im trying to update my app on the market. When I download I get error "Version 1.0 already exists.". Ive been looking everywhere and I can not find how do you define your version number of the app?
  Does anyone know how to set my version number 1.1?

  Have you updated your manifest file:
  https://developer.Mozilla.org/en-us/A.../manifest#version

• Errors while updating Java

  Try to update Java for Windows & it gives me error 3 screens. (1) neither command line parameter specified is an existing directory. Java 2 update) fails to apply the changes to your system. 3) error 1722. There is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. I have Windows XP with 32-bit operating system and Service Pack 3 version 5.1 version. Course Java 6 "update 22' is on my system and I can't seem to" day 26'. " What should I do next?

  Uninstall and reinstall the latest version.

  How to uninstall Java on my Windows computer?
  http://www.Java.com/en/download/uninstall.jsp
  This article applies to:
  Windows 7, Vista, Windows XP, Windows 2000, Windows 2003
  Java version (s): all Versions of Java

  J W Stuart: http://www.pagestart.com

• We get a "WindowsUpdate_8024a000" error while updating Windows 8.1

  * Original title: WindowsUpdate_8024a000

  I tried to upgrade to 8.1 windows I am dell inspiron 15R and I got this error WindowsUpdate_8024a000

  What should I do

  Hi Rehmina,

  If you receive the Windows Update 0x8024a000 or 8024a 000 error when you use Windows Update, the cause may be an interruption of the connection between your computer and the Windows Update service.

  Here are a few methods you can try to solve this problem.

  Method 1: Run the Windows Update Troubleshooter.

  Open and run the Windows Update Troubleshooter to fix the problem automatically.

  Method 2: Run the troubleshooter for Internet connections.

  Open the network troubleshooter utility by hitting at full speed in the straight edge of the screen, tap Search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking Search), incoming in identification and repair in the search box, and then type or clicking on identification and repair of network problems.

  Method 3: Restart the Windows update service and check.

   

  a. press or press the Windows key + R, type services.msc and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

  c. find the Background Intelligent Transfer Service and check the status.

  d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

  e. search Windows Update and check the status.

  f. If the status is stopped, click Windows Update, and then click Start menu.

  g. close Services.

  As a reference, I'd refer to the answer from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1

  Please post back the results and we will be happy to help you further.

• Error while updating Photoshop cs5 Windows 10

  I have Photoshop CS5 64

  I've updated a Win - 7 to Win-10 Pro system. Then I formatted the boot record and installed Win-10 own.

  Then I installed PS CS5, the 64-bit Version.

  I tried a few things, it seems to work ok

  Today, I saw an update icon.

  Said application manager: update of Bridge, Photoshop, Camera Raw and the extensions Manager

  Update will begin, the download will start, but in the end, I get a message saying:

  While downloading the updates, an error has occurred. Close it and try again

  It happens all the time

  What should I do?

  Thank you

  Please manually update Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5: thanks

  ~ Assani

• Satellite L500-1XC - error while updating the BIOS

  Hi, just download the most recent update BIOS but there is an error everytime I try to update to come... "uefi bios winflash over 210 ac of 10% battery attached"

  Connected AC and battery not charging but tried to leave and remove too. Current bios 1.60
  I tried to find a BIOS flash utility but no permits. BIOS default loaded and tried in safe mode too.

  Any suggestions?

  Hello

  I think that's the problem because the battery is not completely charged so you can't update the BIOS. Can you charge the battery when the laptop is turned off? I mean you can see the battery LED and if the battery is charged it changes the color of the orange in white or green (it s mentioned in the user manual). Can you confirm this?

  On the other side, it would be interesting to know why the BIOS update is important to you. Problems with the computer? If it is not updated the BIOS isn't important, you can forget it. Never touch a running system ;)

• Error while updating my system.

  I turned on my laptop and after loaded dell logo he said maintain your system and it maybe 14% (but it varies how much we get every time). Then an error pops up and it says error C000003A application operation 18828 111982 (appraiser.sdb) and its loading, but it stays there forever and it does nothing. I don't know what it means, but it is very annoying and I don't know what to do. I looked all over google and everywhere and I can't find anything. I heard I could keep tapping f8 and it would provide a place where I could fix it that I forgot what I call, but I tried and it won't work. Please if anyone knows how to solve this help please I can not access my computer it is stuck at the loading screen and I can not even on the windows login screen or anything.

  Hello

  You can create one using the link below.

  Download Windows 8

  Note: You need product key for Windows 8 to create the installation media.

  I hope this helps.

• I have e new Microsoft 5000 keyboard and a mouse and the updated Intellipoint software. The mouse is erratic, and the keyboard is horribly slow.

  The batteries are new, as is the keyboard. The keyboard is also erratic, as sometimesit is sensitive and sometimes painfully slow.

  Hi PaulNord,

  I guess your operating system is windows XP, and if this is the case, additional software is required for your device works properly. If you haven't already done so, you can visit your device home page in the link below to download and install the appropriate drivers.

  http://www.Microsoft.com/hardware/en-us/p/wireless-comfort-desktop-5000#support

  I hope this helps.

• "An error in updating your system has occurred." Select 'OK' to undo the chnages that have been made.

  I install "WindowsXP-KB926139-v2 - x 86 - ENU"(power shell)
  at the end I have "an error in updating your system has occurred." Select 'OK' to undo the chnages that have been made. Windows XP 32-bit. Please help solve this problem. Thanks in advance.

  imran_iiui,
  When you look at your installed updates it appears as failed?  If Yes, what is the error code that you found?  Have you looked at the actual article for KB926139 and links for information PowerShell?  You can look through those.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Windows PowerShell 2.0 and WinRM 2.0, Code 80070020

  Cannot install Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based Systems (KB968930) Code 80070020.  I tried to install the update on 16/04/2012 (which is as far as my story goes).  Other updates were installing.

  Thank you

  E-mail address is removed from the privacy *.

  Hello

  You are able to install some other updates?

  Follow these methods mentioned below and check.

  Method 1: Sometimes, third-party applications may conflict with the installation of the security update, you can perform a clean boot and check if that helps in the installation of these updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to start your computer in normal mode, see step 7.

  Method 2:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install the update manually and check.

  32-bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9864

  64 bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9239

  For more information, see this article: problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Error while running Sqlplus from shell

  I am trying to run below shell script with ticks('${ORACLE_HOME}/bin/sqlplus) rear the code below when calling sqlplus. When I do it all the next lines after changing red to vi and when I run the script, I get an error like "syntax error: unexpected end of file". may I ask you, please, I know what could be the problem? I suspect that it is perhaps because of EOF, when I have the backticks on it runs very well.
  

  #!/bin/bash
  logit "Updating the Validation Status Field in ${DBSTGUSER}.FEED_PROCESS_LOG Table as RUNNING With Matching Parameters"
          logit "UNINUM :: ${UNINUM} PROVIDER :: ${PROVIDER} EXTRACT_DT :: ${EXTRACT_DT} VER_NUM :: ${VER_NUM}"
  
          `${ORACLE_HOME}/bin/sqlplus ${DBSTGUSER}/${DBSTGPASS}@${DBSRC} <<EOF > ${UPD_FEED_PROC_LOG}
          spool ${UPD_SQL1}
          UPDATE ${DBSTGUSER}.FEED_PROCESS_LOG SET VALIDATION_STATUS='RUNNING'
          WHERE UNINUM='${UNINUM}' and PROVIDER='${PROVIDER}' and EXTRACT_DT='${EXTRACT_DT}'
          and VER_NUM=${VER_NUM} and ACT_END_DT IS NULL  AND (VALIDATION_STATUS IS NULL OR VALIDATION_STATUS='RUNNING');
          spool off;
          COMMIT;
          EXIT;
          EOF`
  
          if grep -q "ERROR" ${UPD_FEED_PROC_LOG}
          then
                  logit "Error While Updating the ${DBSTGUSER}.FEED_PROCESS_LOG Table"
                  logit "Please Check ${UPD_FEED_PROC_LOG} Log File For Detailed Information"
                  exit 3
          else
                  logit "Updation Of ${DBSTGUSER}.FEED_PROCESS_LOG Table Completed Successfully"
                  logit "Please Check ${UPD_FEED_PROC_LOG} Log File For Detailed Information"
          fi

  Ariean wrote:
  I thought that the forum will be people with mixed skills (sql/script) they would be able to quickly direct me towards the right direction. There is no problem, it is with the RDBMS.
  I know that EOF is synonymous with end of file and I am piping the data in the program (sqlplus).

  You could also just use 'FUBAR' instead of folklore; who is be an arbitrary string of characters.

  piping ("" | "") is NOT involved, as in the env. Sorting

  you don't know, what you don't know.

• Director of BI error when updating Rowcount: table or view does not exist

  I use BI administrator 11g. After you create a new repository and import of metadata, I brought the physical model in the MDB layer. When I tried to update the number of lines for tables in the physical layer, I get:
  
  There was an error while updating the number of lines for '< instance >'... "" schema of <>. "' < tablename > '.
  [17011 nQSError] Execution of the SQL statement failed.
  [nQSError 17001] Oracle 942 error code, message: ORA-00942: table or view does not exist to the call of the OIC OCIStmtExecute: select count (*) < TableName >.
  
  I created the connection during the import process pool and tables have been found at the time. But once the import is complete I never update rank leaders. I have access to all the tables in question via the user account in the connection pool.
  
  Anyone have any ideas?
  
  Thank you
  Ken

  You must check "require fully qualified name checkbox in the connection pool properties. This is necessary when you use the username not owner to access the images database.