We get a "WindowsUpdate_8024a000" error while updating Windows 8.1

Similar Questions

• I get 80244o1c error after updated windows update

  I recently used the reformat windows 8 setting, "all remove and reinstall windows.

  I have had no problems or issues with the process until I've decided to use windows update to install the necessary updates.

  Update Windows prompted me to upgrade to the latest version. I then downloaded and installed the update and it told me that windows update will automatically close and open again. After the update I went and go to check updates. I filled the boxes updates, I want to install the first. I have install updated partially because I don't have the best internet speed to download all updates at once. But after installing the updates I get only error 8024401c. I tried to use the Troubleshoot utility and restart the computer when you are finished, but I still get the error. I tried all of the solutions in this link http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/windows-update-error-code-8024401c/f8b9dc5f-a512-4e74-b41c-d357ca40f9f7. But still nothing.

  Help, please.

  P.S

  I also tried to reset (delete everything and reinstall windows) several times and the recovery of a option restore point until I started the update from windows update. But still no luck.

  Hi Justin,

  Thanks for posting your query on the Microsoft Community.

  I appreciate your troubleshooting steps.

  As you said you get a 8024401C error after installing Windows updates.

  I need some information.

  1. What is the brand and model of your computer?
  2. Do you remember the numbers KB installed updates?
  3. What happened when you performed the reset and restore? Do you have an error code or message?

  I suggest you to please provide us with the number of the last update that you have installed on your computer.

  See the link given below to find the number of the update through view update history. Please refer to the appropriate section (how can I find out what updates have been installed).

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Try the methods.

  Method 1:

  As you have already tried to reinstall your Windows, I still once suggest to run the system update tool as system update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008.

  See the link below for the procedure:
  http://support.Microsoft.com/kb/947821

  Method 2:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.

• I get ut3.ext errors while playing on server Steam. How can I solve this problem?

  I get ut3.ext errors while playing on server Steam. How can I solve this problem?

  * original title - how can I fix errors ut3.ext *.

  Hello

  • He previously worked? If yes you remember to change your computer before this problem?

  Method 1:

  Disable the firewall and then check if it helps: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  Method 2:

  Start your computer in a clean boot, and then check: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  You can also post your questions in the epic games forum: http://forums.epicgames.com

• Get a permissions error while trying to open Adobe illustrator "to work properly, Adobe Illustrator requires the permission of folder preferences to" reading / writing ".» The current permission setting is incorrectly set to "read only".

  Get a permissions error while trying to open Adobe illustrator "to work properly, Adobe Illustrator requires the permission of folder preferences to" reading / writing ".» The current permission setting is incorrectly set to "read only".

  I put permissions in the preferences and on hard drive - the same error.

  What is a current version of CC (CC2015.2.1) or an earlier version. Your best bet may be uninstalled, run the cleanup tool (Google it) and reinstall.

• We get a 641 error while trying to install the two updates of windows.

  I get errow 641 and. I can't get two updates to the loaded window what to do

  * Original title: Update window

  Hello

  1. What is the number of KB (Knowledge Base) the two Windows updates?

  2 are you able to install some other updates?

  3. were there any changes (hardware or software) to the computer before the show?

  Please follow the steps mentioned below and get back to us with the results.

   

  Method 1: run the Microsoft Fixit and see if it helps.

  http://support.Microsoft.com/mats/windows_update/

  Method 2: perform the steps in the article mentioned below and see if it helps.
  http://support.Microsoft.com/kb/818018/

  Hope this information helps.

• Get a 8024001e error when installing windows update kb2310138.

  * Original title: kb2310138 windows update will not be installed. get the 8024001e error code

  I restored my computer to the State, he came in cardboard and reinstalled most programs.

• 80072F8F (updated dt000 this is the error I get when I try to update windows 7)

  tried many things, nothing works.

  Windows Update error 80072f8f
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072F8F

  and/or

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error 80070103 updates Windows installing drivers for laptop HP keeps repeating

  I have a HP dv7 laptop with Win7 SP1 (64-bit), 6 GB of RAM and all updates.

  Recently, I received another set of 3 that are specific to the hardware of my HP laptop.  I checked, and 2 other Microsoft and proceeds to their installation.  2 Microsoft installed OK, but the 3 which are for hardware of the laptop, failed.  (Update the Intel driver for another liaison WiFi, Intel - hardware and Realtek network card) The screenshot is (the center of the 3 lines):

  

  I right click each of the 3 defective items and screenshots are:

  

  

  

  I then right click on the line with the text: [Code 80070103 "Get help with this error"]

  and got this message for all 3 screens.  I enclose you one of them, because they are the same:

  

  A few hours later same updates Windows 3 reappears and I installed them again, this time stopping at the antivirus and anti-malware programs.  There was no difference - I had the same failed installation attempts.

  I would very appreciate advice, suggestions or recommendations on how to make these updates of Windows installed properly and successfully.

  Thanking you in advance.

  R.Tan

  You should be happy that they're fail because generally, it is never a good idea to accept installation hardware (audio, video, network), drivers offered by Windows Update.

  If you look on this error page:

  https://support.Microsoft.com/en-us/help/10164/i-got-an-error-code-from-Windows-Update

  It is said:

  If you receive Windows Update error 0 x 80070103 while installing updates, you might be trying to install a driver is already installed on your computer or a driver that might be less compatible that you have already installed.

  Microsoft does not know what are the best drivers for your system and you should only get updated hardware driver of your WWW site of system manufacturers and only when you know that the update may solve a particular problem.

  There are many topics where people blindly install all the updates that are available from MS, then the find something on their system which suddenly ceased to behave (audio, video, network).

  If you see these hardware driver update offered by Windows Update, that is better right click and hide them so never see again you them.

  You can read this topic where I described how to keep MS you offer hardware driver updates in the first place:

  Prevent the driver from Windows Update updates

• Get the 49 error while trying to download Photoshop CC. Retry does not resolve the problem.

  Using Creative Cloud getting 49 error while trying to download Photoshop CC. Retry problem persists. Other downloads for other correct programs.

  Dave,

  When you try to download a creative cloud application, you receive one of the following errors:
  Error - 60, error 49 error 201, 205, 206, 207, error 403 error error error

  Or when you try to download and apply a patch, you receive one of the following errors:

  U43M1D200, U43M1D204, U43M1D205, U43M1D207, U43M1D214,

  Please see this link: download, installation error or update creative Cloud applications.

  Guinot

• Get a "0x80071ac3" error while trying to delete the .mp3 on Micro SD card 64 GB.

  * Original title: error '0x80071ac3' in Windows 8

  I have a micro sd 64 GB card but every time I tried to put some .mp3 files or even delete what is already on the card I thought it's dirty, I tried to format it still didn't work, I tried to remove it from the cmd prompt also did not work what I do now please with an explanation of the steps to follow.

  Thank you very much I understand your concern.

  Hi Mr.Als,

  -Did you check if the SD card works fine on another computer?

  This problem may occur if the card is damaged. I suggest you run the check disk utility and see if that fixes the problem.

  Run audit on the SD disk utility.

  1. In the start screen, type: CMD, right click command prompt, and then click run as administrator.
  2. At the command prompt, type: chkdsk /r
  3. Exit the command prompt.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  You can also try to unlock the switch and see if it helps.

  Look for the lock switch on the upper left side of the SD card. Lock switch may be a small white or silver tab jutting from the left side of the SD card.

  Keep us updated on the status of the issue.

• When I restart my computer, I get this message error loading C:\windows\pxtdmap.dll, what should I do?

  Error loading C:\windows\pxtdmap.dll, what should I do?

  Hi Nancy,.

  The error message says anything else? Just, based on

  "C:\windows\pxtdmap.dll", I am unable to find a possible solution.

  The error message contains more information or could look you in your system event viewer to see if there is a more detailed error message there?
  http://support.Microsoft.com/kb/308427
  It would also be possible to use the system restore utility to restore your computer to a time where you did not receive this error?
  http://support.Microsoft.com/kb/306084

• Error while updating Photoshop cs5 Windows 10

  I have Photoshop CS5 64

  I've updated a Win - 7 to Win-10 Pro system. Then I formatted the boot record and installed Win-10 own.

  Then I installed PS CS5, the 64-bit Version.

  I tried a few things, it seems to work ok

  Today, I saw an update icon.

  Said application manager: update of Bridge, Photoshop, Camera Raw and the extensions Manager

  Update will begin, the download will start, but in the end, I get a message saying:

  While downloading the updates, an error has occurred. Close it and try again

  It happens all the time

  What should I do?

  Thank you

  Please manually update Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5: thanks

  ~ Assani

• I have Windows 7 and still get this message: error while unpacking program code 2. Will you please report to author and I can't findKB2533623

  Can someone help me please I have Windows 7 and get th same message and I can't fint that update in my system

  Hello

  • When you receive this error message?
  • What exactly are you trying to install?
  • Did you install KB 2533623 on your computer?

  If you have installed this update on your computer, I suggest that you try to uninstall it and check:

  1. Click on "start > Control Panel > programs and features.
  2. Click on the link "View installed updates" on the left side of the window.
  3. Locate the update ' update for Windows Vista for x 64-based systems (KB2533623).
  4. Select the KB2533623 update and then click on the "Uninstall" button
  5. Once the update has been removed, restart the computer.

• I get the 8024000E error message when windows update tried check _ updates

  What should I do to correct this.  I've never had this problem before.

  Hi lori1010,

  Welcome to the Microsoft Windows Forum!
   
  What is the update that you tried to check? Updates usually begin by KBXXXXXX.
   
  Temporarily disable security software, updates and then try to install

  Run fixit to reset windows update components and restart the computer

  Here is a link to reset the Windows components: http://support.microsoft.com/default.aspx/kb/971058

  If the problem persists,
  
  You can scan System File Checker (SFC)
   
  To run the System File Checker tool, follow these steps:

  1) click Start and type cmd in the box start the search.

  (2) right click on cmd in the list programs, and then click Run as administrator.
   
  (3) If you are prompted for an administrator password or a confirmation, type your password or click on continue

  (4) at the command prompt, the following line, and then press ENTER:
  sfc/scannow
   
   
  Hope helped with this information
   
   
  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• need help with error in Update window

  error 80096001 that is the message I get I can't update

  Hi SejB,
   
  Welcome to the Forum of answers Windows Vista.
   
  This problem may occur if one or more of the following conditions are met:

  • Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
  • Cryptographic services is set to disabled.
  • Other Windows files are corrupted or missing.
  • The timestamp signature or the certificate cannot be verified, or is incorrect.
  • The hidden attribute is set to the folder %windir%, or one of its subfolders.

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.
   
  Method 1: Rename the Edb.log file
   
  Rename the Edb.log file, and then try to install the program again. To rename the Edb.log file, follow these steps:

  1. Click Start, click run, type cmd in the Open box, and then OK.

     Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

  2. At the command prompt, type the following command and press ENTER:

  Ren %systemroot%\system32\catroot2\Edb.log *.tst

  Method 2: Set Cryptographic on auto Services

  Define Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Method 3: Reregister DLL files that are associated with Cryptographic Services
   
  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, click run, type cmd in the Open box, and then OK.

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

  2. At the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll
  output

  Note If you are prompted, click OK .

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  1. Restart your computer.
  2. Click Start, click run, type cmd in the Open box, and then click OK.
  3. At the command prompt, type the following commands and press ENTER after each command:

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note If you are prompted, click OK .

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  1. Restart the computer.

  Method 4: Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start, click run, type cmd in the Open box, and then OK.

  Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

• At the command prompt, type the following commands, pressing ENTER after each line:

attrib s h % windir %
attrib s h %windir%\system32
attrib s h %windir%\system32\catroot2
output

Method 5: Define a signature unmanned silent success strategy

1. Click Start, click run, type regedit, and then click OK.

   Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

2. Locate and then click the following key in the registry:

The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing

1. Right-click on the Policy binary value, and then click change.
2. The value data will appear in the following format:
0000 02

Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

1. Click OK, and then quit the registry editor.

Method 6: Clear the temporary file and restart the hotfix installation or the service pack installation
 
To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

1. Remove all tmp*.cat of the following folders:

   systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

   systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

2. Delete all the kb*.cat files in the following folders:

% systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
% systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

1. Remove all the oem *. * files in the % systemroot %\inf folder.
2. At the command prompt, type the following commands. Press ENTER after each command.

net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output

1. Restart the installation of the patch failed or the installation of the service pack.

Method 7: Empty the software distribution folder

1. Click Start, click run, type services.msc and click OK.

   Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

2. In the Services (Local) pane, click automatic updates, and then click stop.
3. Reduce the Services (local) window.
4. Select all the contents of the Windows distribution folder, and then delete them.

   Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
6. In the Services (Local) pane, click automatic updates, and then click Start.
7. Restart the computer, and then run Windows Update again.

You can also follow the link below:
 
You cannot install some programs or updates
 
http://support.Microsoft.com/?kbid=822798
 
I hope this helps.
 
Concerning
Rehman - Microsoft Support