NETGEAR Push2TV with Satellite Z10T on Windows 8

Hello.

Try to get a Netgear Push2tv (PTV3000) with my new Z10t (PT132A-00F00T). The Netgear support pag2 says I need driver Wifi Intel wireless display, V3.5.41.0, V15.5.7. Been go7ng around and in circles trying to download these versions, but without success. Can someone please tell me where I can download these for my Toshiba?

Thank you... David

Hi David
All drivers supported by Toshiba, you can find on http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Support page drivers usually in the original manufacturers. Have you checked s Intel support page?

Tags: Toshiba

Similar Questions

  • Ends with satellite L350D-214 - Windows 7 Setup

    My Satellite L350D-214 will not be configured correctly.

    I looked in the manual and it says follow the on screen put in place and I do. It happens with the language so I click English and then he then returned with the installation of Windows 7, so I click Next. then he comes up with a big black square with white writing, it says press any key to continue so I did. Then, it does nothing.

    At the bottom of the screen theres boz another that I have open and also tried by pressing any key, because it also says I should.

    It is not just anything!

    Hello

    You try to install Windows 7 from a Microsoft or Windows upgrade kit Toshiba disc?

    I put t know if you are level or new installation, but you should try it with a new facility.
    Check this box!

  • Does not begin with satellite U840-110 - Windows 7 - loop start-up

    Hello

    I have been using a Satellite U840 - 110 portable since dec 2012 on a Windows 7 Home Premium operating system. Recently, the laptop was left in standby for a few days. When I tried to start the computer, it froze at the start. So I forced reboot by pressing the power button. After repeating this for a couple of times, he first showed a blue screen. Then, when the computer has been restarted, he showed a black screen with the following message

    "Windows error recovery".
    Windows could not start. A recent hardware or software change might be the cause.
    ...
    ...
    Run the Startup Repair tool or
    Start windows normally'

    I have tried both these options multiple times and every time at the end of the process, he might come back to these same screen. I also tried to press F8 and used advanced and tried Boot Options "not last know good configuration."

    None of this seems to work and I was not able to load Windows. I don't have a backup of my data and can end up losing a lot of vital information.

    Is there anyway I can solve the problem and get the computer to work again?

    Is it possible to recover data from the hard drive.

    Thanks in advance for the help!

    Is it possible to recover data from the hard drive.

    You can remove the laptop HARD drive and could connect to another computer using USB-to-SATA cart.

    After that, you could insert the HARD disk into the laptop new and could try to perform the Toshiba HDD recovery.
    (F8 - fix my computer - Toshiba-HDD recovery)

  • Problems of connectivity/Firewall with my laptop for my Netgear Push2TV HD (2000)

    Help, please!  I can no longer connect my laptop Dell (Windows 7, Core i3) to my Netgear Push2TV HD (2000) to my TV without turning off my McAfee Firewall.

    The wireless network connection that Windows has assigned to this device is called "wireless connection network 2" and is a "unidentified network" which is also called a "Microsoft Virutal WiFi Miniport Adapter."  The main "Wireless Network Connection" is that Intel uses to connect to my router.

    When I click the "Intel WiDi" program to find and connect to the Netgear box, I am able to find the right adapter Netgear (even when the firewall is turned on), but when I try to connect (with the firewall on) it does not allow me to connect.  Again, if I turn off the firewall, I am able to connect (I can even turn off the firewall on once I am connected... and I don't lose my connection.  "But once I close the program WiDi, I can't connect the Netgear box without disabling the firewall).  But I really want to avoid this step, every time I'm trying to use the device.

    Using Windows troubleshooting utility, I am informed of two problems that, if fixed, can be part of the solution (but I'm too inexperienced to understand):

    (1) "DHCP is not enabled for"Wireless Network Connection 2' "; and

    (2) "wireless Network Connection 2 is not a valid IP configuration."

    I don't know if these problems are in fact THE problem that I need to worry.  My guess is that there is a simple solution within the McAfee Firewall program to allow me to make this connection, but I'm not able to discern what is perhaps this difficulty.  I'm going to this for several hours now.  Any help would be a blessing.  Thank you.

    -Daniel

    Hello

    Thanks for posting the request in the Microsoft community!
    I can imagine how disappointing that must be. Don't worry; You can try the advice given and check if it helps:

    You receive an error message?

    Method 1:
    You can try the suggestions in the link and check.
    Disabling firewalls contradictory such as Windows XP, McAfee, Norton, or Zone Alarm
    http://KB.NETGEAR.com/app/answers/detail/A_ID/1111/~/disabling-conflicting-firewalls-such-as-Windows-XP, - mcafee - norton, - or - area

    Reference links:

    http://service.McAfee.com/FAQDocument.aspx?ID=TS100887

    How to set up rules of incoming/outgoing firewall on NETGEAR Modem Router/gateways

    http://KB.NETGEAR.com/app/answers/detail/A_ID/8219

    Method 2:
    To work correctly, some programs may require you to allow them to communicate through the firewall.  See suggestions from the link:

    Allow a program to communicate through Windows Firewall
    http://Windows.Microsoft.com/en-us/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

    Check out the link:
    What are the risks of allowing programs through a firewall?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-risks-of-allowing-programs-through-a-firewall

    If the link above help not then pots of your query in the forums of Net gear.

    http://forum1.NETGEAR.com/

    If the problem persists, feel free to let us know. It is our pleasure to be of service.

  • Is - Windows 7 works with Satellite M70 129

    Hi all

    How are you guys?
    wanted to ask you if Windows 7 works with Satellite M70-129 or not?
    Toshiba is going to support or not with drivers and other things?

    Thanks in advance

    This is a user to use the forum, so if you wait for an official statement from Toshiba then you can wait until you get gray hair
    If you want to hear my opinion then this is

    Windows 7 is very similar / same as MS Vista OS. It supports only a few additional features and options.

    In the European Toshiba page driver I found the Vista drivers for this laptop M70 series and I guess these drivers could be used on Windows 7 too.

    Good bye

  • Problem with the installation of Windows XP on the Satellite A200-1RK

    Hello!
    I ve you have a problem with my laptop.
    I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
    Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
    Why?
    Can someone help me?

    Maybe I can use drivers from another laptop A200 series, but which?

    Hello
    a good explanation how to install XP on a SATA machine can be found here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

    Welcome and good luck

  • IdeaPad V570 and Netgear PUSH2TV HD PTV2000

    Someone at - he tried this combination?

    And if so, I would like to know your opinion on the results.

    The exit HDMI works perfectly, but as it has 2 Widi I am considering for Netgear PUSH2TV HD PTV2000

    Thank you!

    OK, I got amd that it works very well.

    There is about a 1/4 second delay, but after he split the screen in two, it is not really noticeable.

    In fact, I'm writing this, I watch a video on the wireless display.

    Slight update: wouldn't play DVD with the display of Lenovo driver, Windows update is resolved that.

  • Satellite A100 - starts Windows

    Without changing anything, my Satellite A100 starts Windows.

    A screen with Windows foutherstel (failure recovery) gives two options; Start windows normally and start recovery. When I push the first option, there is a quick blue screen, which disappears too quickly to read the music. Finally the resumption of failure screen comes back. in the alternative, there is a system that is said; Recovery Options screen It cannot start the program installated. Click Ok to shut down the computer.

    How can I solve this problem?

    Hi hans_3,

    Maybe something has confused the Windows registry or some important system files and thus, you can t more to start Windows or start the system repair option.

    I think in this case it of necessary to reinstall Windows. Therefore, you can take the Toshiba recovery disc that brings your computer back settings factor o where all the drivers and tools are already installed but it erases the entire HARD disk.
    It only takes a few minutes and needs just a few clicks.

    Good luck! :)

  • Strange sound problem with Satellite L740 TV outputs

    I'm having a strange problem here... I googled this several times already, and I only found the same solution mentioned several times and the given solution * not * work is to me.

    I have a Toshiba Satellite L740 running Windows 7 Home Edition Premium, with a 64-bit Intel Core i5 - 2410M @ 2.30 GHz CPU and 4 GB of physical RAM. My problem is the following...

    There are two different TVs in my house that I regularly connect my laptop via HDMI cable.
    The first is mine, and I can get sound through the TV very well when I plug it in.

    Sometimes, however, I will disconnect the computer from my TV and not get any sound through the laptop because he's trying to output to external speakers to TV.

    More importantly, when I connect my laptop to my * roommate * TV (the same make as mine, you mind), I can not all the sounds of his TV at all.

    This is a recent problem. Until this morning, I was able to get noise from two TV very well and only sometimes had problems with sound through the laptop itself, which has been easily resolved by restarting.

    It's just a hunch, but it's almost like * doesn't realize that there are two different TVs * that it is connected to my computer. Maybe it's stupid, I don't know, but be it, it's frustrating...

    * ALSO: * I've seen dozens of suggestions that I put my HDMI audio as default device. Yes, I did. It wasn't the issue. Is the same to activate my audio drivers in Device Manager. They are all turned on, so it's not that either. Any ideas?

    It's a bit strange if you connect the laptop to two identical televisions and use the same HDMI cable to the TV.

    Unfortunately, it all works automatically and I put t know if you can force your laptop to recognize two TVs on the same path.

    In the worst case you have to do it manually in the sound properties > playback devices.
    If it works with four mouse clicks you can change.

    I tested my laptop with two different TVs.
    At home, I have a Toshiba TV and at the office we use Sony. On both automatically get sound on the TV speakers.

    If you will be able to find the solution please let us know.

  • Satellite L650 und Windows 10 error: this CPU is not supported

    Hello

    I have the satellite L650 not modelsk1ja-0e8017

    Recently I have continually mistake to Get windows 10 app 'this CPU is not supported.
    I try by activation and deactivation of NX bit, but it does not work. When will you provide new bios after the version 2.4 of the BIOS?

    I read on the similar message on CPU is not compatible with the new system Windows 10.
    Obviously this is a bug in software and it would be already solved Ms.

    I recommend you to check the updates system available for download and installation, install all Windows patches, reboot the laptop and re-run this tool from Ms.

  • External Usb Audio Card Popping and cracking sound with Satellite L500

    Greetings,

    My name is Boyan and I am from Bulgaria, and a year ago, I bought a laptop satellite l500 series (I can't tell which is exactly the model at the moment because my computer is not currently with me and my user manual, the only thing that is said is that it is for L505/L500/L500D / L505D.) But from memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal, because I gave him for repairs for the same problem that I say down below)

    The problem with my laptop, is that when I plug in a Usb Audio card in my laptop I have a crackling sound during live sound is played hollow map external speakers/headphones. I tried several sound cards and speakers/headpohnes which work perfectly well with other computers, including laptops, but the problem continues even when I use an external sound card to connect to the laptop not appearing in my laptop speakers/headphones.

    The problem is important only when the signal passes through an external audio card and it is very disruptive since I use my laptop to create music and I bought a sound card expenssive and speakers that can not be used with the laptop. I tried 3 types of sound cards:

    M-Audio Fast Track Pro

    BEHRINGER uca 222

    and a simple 3d audio usb audio card external and the problem persists.

    At first, I thought that the problem is software and I should install the new drivers, windows 7 automatically recognizes and installs the drivers for the devices and I have its in (but with the cracks and educated) so I tried using the official drivers sold for me with the sound cards, but without success: the problem was still there. I tried to find the new drivers of the sound cards on long official distributors and I downloaded it but the problem was still there. Then I tried to delete all the audio drivers on my computer and just use the external sound card for sound but this eighter helps force. I updated my drivers for my sound card build - in as well but again - no luck.

    After substantial thing frist I did when (2 weeks after I bought the laptop) was to contact the store where I bought my audio card and they said that the problem may be so eighter latency or high voltage of the laptop they advised me to try to reduce the latency of the parameters or to try and see if the problem persists if only my laptop running on battery power. I tried two things, and they did not help. Audio cards worked without problems on all the other computers I tried them but me. So they told me that the problem could not be audio cards.

    What I then was that I gave my laptop for the Distributor official of toshiba in my country so that they can solve my problem. What they told me, is that a problem with the version of windows which was preinstalled on my laptop and it was not compitable with the sound cards (which was bizzar survey because I tried them on the same windows and they worked, only on other computers). So I'm back from my laptop and passed under my Windows 7 Home Premium 64 bit operating system to Windows 7 Ultimate edition 64-bit and Windows 7 32-bit Ultimate edition on all versions, that's the problem: whenever I activate a low of passes of audio signal and Audio Usb card he heard cracks and educated. I even tried isntalling Windows XP, but the laptop want spesific SATA drivers for the Windows XP installation which although I found - they helped me install XP and I didn't go the BIOS of the computer to try to put a new and so on, because I'm not sure about that and I could lose my warranty so I said in the official repair shop for Toshiba in my city to put XP on my computer to solve the problem but they can't because they are not liscened to work with software that isn't a recipt for its purchase (which I did not because I bought my windows xp a long time ago and I lost the recipt)

    I gave her to get it repaired for the second time by telling them that the change of my operating system has not solved my problem and what they were doing was they changed the motherboard on my computer, indicating that the build in the device realtek audio on my computer is good enough to support a card usb audio or it may be broken and they change the whole motherboard because the generation of card is stuck, so they did it, but my problem has not been resolved. They told me that although I use and map external audio usb signal always going trough my only internal and I have to disable so I tried to disable this trough Control Panel, but this does not solve the problem and I don't have a BIOS option to disable my sound card build-in. Another thing I thought that maybe the problem is that two audio cards do not work on the same bitrate and Hertz so I put both cards to 16 bit 48000 Hz DVD quality (also tried the other options on the 3 cards that I have) but it's the same thing.

    They told me that it's just my luck and the construction of the sound card does not support this external sound cards and I would had been more careful when they choose to my laptop first.

    I couldn't accept this awnser for several reasons:

    (1) this sound card works on a lower version of windows and are supported by many older models of Realtek and a lot of old computers (one of them bought 2000! and my laptop is of 2010!)

    (2) the guys who were the apperantley of fixing problem don't go so deeply into my problem because they didn't know that in fact the problem was that only they knew that there is a problem with the audio card and the computer interact with them, they knew not that it cracks during the direct play the external audio card.

    (3) I can't accept the fact that Toshiba is manufacturing of models with maps audio chipset that cannot support a simple external Usb Audio card. It is totally unacceptable to me, and I sincerely hope that this is not the case!

    (4) they have tried my audiocards on another laptop of the same series, claiming that they have not at their dispossal at the moment so I'll go tomorrow at a local store and try the sound cards by myself on the same computer in the store.

    What I have now, it was that I gave my laptop for repair requesting a statement of the problem in wrtting with details of the problem so I can go to court or ask for a new laptop, but I'll be charged with little money because according to them there is no problem in the laptop and the problem is that my external sound cards are not compitable with the build in house chipset sound card. If I give my laptop for repair, and there is no hardware problem, I'll have to pay the money. I will do this, but I'm now crazy, because that does not solve my problem and I am wasting time and money.

    What I ask here is, if you can not help me solve my problem and advice me what to do to fix it, please give me the details of the chipset built in Driver sound card on my motherboard, so I can check if it is compitable with my external sound cards and contact the dealers of the sound card to ask them their opinion. Or if you can tell me what it is compitable with and what not, that would be great. Personally, I think this laptop should have no problem at all with a simple external usb running sound card, but I ask you, if you know something more about it.

    If a problem with the build in chipset then Toshiba is manufacturing (or at least sell) audiocards which are not in a normal standart but unfortunately I can not do nothing except complain to Toshiba and never treat whith such productgs more. Otherwise, if this is not true, then my laptop has a problem that is different and I have to go to court with the mans for mounting repair is not my laptop or do not give a new one when I guarantee will not fault of Toshiba and it will be in a way solve my problem.

    I hope that you understand how important it is for me and I hope I have fix the problem as soon as possible.

    P.S

    I want to say that I am familiar with grammar mistakes, that I did in the text below, and I would ask your excuses that I'm not a native speaker of English.

    Hi, I would just say that I had a similar failure although I wouldn't be surprised if she causing of yours, but you never have knowledge, my fault was the lid of my laptop [9 months], it contains the mic and when the lid has been in a certain angle cracks could be heard worse when I got my external sound card all the time it happened, luck, PS, it's a defective membrane [lid to the body] easily missed by engineer because he was the same angle you English is very good

    Post edited by: sido1

  • Satellite Pro L300 Windows 7 Upgrade - DVD player no longer works

    Hello

    I upgraded my Satellite Pro L300 Windows Vista to Windows 7 a few months back, now, I noticed the Player DVD no longer works! All ok in Device Manager, but the habit of reading anything.

    I have use a Toshiba Windows 7 upgrade disk that could be my problem. I used the Windows 7 Upgrade Advisor and Windows 7 Ultimate disc.

    I tried to download and install the latest Windows 7 32 bit DVD Toshiba drivers but still no joy.

    Can someone advise procedure I should follow to correct, if I need to downgrade back to Vista, hope not!

    Thank you.

    Optical disc drive is properly listed in Windows Explorer?
    Do you have problems with some specific discs?
    Original music and film discs are readable?

    What player you use to watch movies?

  • Order of installation of drivers for Satellite Pro 4600 / Windows 2000

    Does anyone have the installation order of drivers for Satellite Pro 4600 (Windows 2000)? I already found the site to download the drivers ([http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE]), but I don't know in which order should I install them.

    Welcome,

    Floyd

    Hello

    There are not many drivers and utilities, so I recommend starting with Chip Set Utility, Display Driver, Driver Sound, infrared Driver, LAN Driver, Wireless Lan Driver, mouse driver.
    Then follow with common modules and energy-saving, etc.

    Good bye

  • Satellite Pro 6000: Windows XP installation problem

    Win98SE works well on my Satellite Pro 6000. I put XP on it.
    During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

    Save mode then also does not work, I can't see anything.
    What I've done wrong? It seems that the video driver is missing?
    With the recovery cd is everything works again. (win98se)

    Someone at - it solution to put XP on this laptop?
    Gr. R.

    Hello

    In my opinion, there should be no problem with the use of Windows XP on this unit.
    As far as I know the laptop came with WinXp pro, W2k and Win98SE.
    In this case, all required drivers are available and must be installed in the correct order.
    I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

  • Satellite L650D-10J - Windows 7 does not start

    Hello

    I have a Toshiba Satellite L650D-10J, Windows 7 64 bit, 4 GB RAM and it do not start Windows 7. He begins to see you logo startup Toshiba etc and then it goes to black and it loads Bootmanager of Windows with the following message;

    + A problem on your computer has occurred during communication with a device that is connected. +

    + This error can be caused by an external storage device as a drive external USB, the device in use, or damaged hardware such as a hard drive or CD-ROM drive disconnect that is damaged. Make sure that all removable storage is properly connected, and then restart your computer. +

    + Contact the hardware manufacturer, if you still see this error. +

    + Status: 0xc00000e9 +.
    + Info: an unexpected I / O error has occurred. +
    (it has been translated by the Dutch there are some sentences that are incorrect.)

    I tried to download a Windows 7 recovery disk, it burned on DVD. It works, I'll get to choose where he was working to correct (I get an error) or use a Windows 7 from disc (does not work). And if I start it in safe mode I see that it stops and freezes to the file; Disk.sys

    Someone at - it an idea?

    Greetings,

    Hello

    And have you connected an external USB device as says the error message? If Yes, remove all USB devices and try to restart your laptop.

    If you can t start in safe mode, your operating system is confusing upward and the only option to get rid of it is to reinstall Windows.

    You use the preinstalled version of Windows 7 in Toshiba? If yes go to the start menu Windows by pressing the F8 button where you can select the safe mode, etc. and choose Advanced repair my computer option. Then select Toshiba HDD recovery and factory settings are restored. Also see this article on HARD drive recovery:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    If disk HARD recovery doesn't work, you need an original Toshiba recovery disc. If you didn t create this drive just order a new one here:
    https://backupmedia.Toshiba.EU/landing.aspx
    ?

Maybe you are looking for

  • Why my test application ends (disappear) during testing?

    Hello I wrote the application of test using CVI2009 under WinXP. The application works fine but when I repeat test, the application closes around the 9th or 10th repetition. When I reload and run the application he'd leave again around the 9th or 10t

  • online order

    Hi all. I am Tal of the Malaysia and very new with LabView. I want to monitor my program via internet. When I used the Web publishing tool (with access to verified review), he used the ip address of my PC. Then, the Web page is saved in the www folde

  • HP Envy 17 t-j000 Quad Edition.

    Hi all Recently bought above system with 16 GB RAM, who has left no option for installing a drive mSATA, given the options.  I am reasonably sure (based on other sites that speak of this laptop) that I can install a player mSATA.  However, I also wan

  • Stuck on "Configuring updates stage 3 of 3 0% complete

    I have a windows Vista x 32 on a Dell portable system.  He was fully functional when I finally stopped him.  I just started to find the Stage 3 the page shown growth of 0% of Windows Update, then it restarts. Stuck in this loop.  Have tried using F8

  • Download stops

    When the phone is locked applications background download download stop so I have to redownload it.What is the reason?