L20-101 problem with bootable disks

Similar Questions

• Satellite A200-1VD: problem with HDD disk

  Hi friends;

  I'm sorry for my bad English:

  I have a problem with my * satellite A200-1VD *, I had with Vista Home edition 2 years ago license. I want to format it, * but I don't have a DVD restore disk * ([http://img96.imageshack.us/img96/5339/discv.jpg]). For this reason, I installed "* TOSHIBA Recovery Disc Creator *" ([http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]), but when I run it, * it does not recognize the HDD * and sent me the following message; ([http://img139.imageshack.us/img139/4445/resultattrdc.jpg]). in the second time, I installed "* Recovery Disc Creator *" ([http://img199.imageshack.us/img199/3197/rdcm.jpg]), but it does not recognize the drive too and sent me this message. ([http://img199.imageshack.us/img199/995/rttrcd.jpg]). I do not know how to this problem that * bothers me too well *. Too I would be grateful if you can help me to overcome this problem.

  Don't forget to see the following pictures to understand my problem.

  * - [http://img96.imageshack.us/img96/5339/discv.jpg]
  * - [http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]
  * - [http://img139.imageshack.us/img139/4445/resultattrdc.jpg]
  * - [http://img199.imageshack.us/img199/3197/rdcm.jpg]
  * - [http://img199.imageshack.us/img199/995/rttrcd.jpg]

  Thank you very much

  Hello

  At first was a little bit the theory for a better understanding.

  In the latest Toshiba delivered recovery facilities DVD discs with all the new models of laptops. "" Since then, I think, two or three drives of years facilities are not part of the package and recovery image is saved on the HARD disk and the recovery disc can be created using preinstalled "Toshiba Recovery Disc Creator. This recovery image is not saved on a separate recovery partition but on the second partition of HARD drive (data partition E) in the folder called HDDRecovery.
  The screenshot on 1.5 GB WinRE partition has therefore nothing to do with the Toshiba recovery image.

  This creation of recovery operation may work with the factory only settings. with other words, if you change the partition structure, or if you deleted this folder HDDRecovery you won't be able to create the recovery disk or install the operating system using HARD drive recovery option.

  I guess that you do not have this folder HDDRecovery more and because of this, Toshiba Recovery Disc Creator starts with error message. This tool needs direct access to these data recovery to create the drive recovery facilities.

  I think all this bother you much, but it's your fault. Reminder with the trace message is preinstalled on each Toshiba notebook with HDD recovery:
  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is severely damaged.*

  What you can do now is to order the new original facilities Toshiba drive under https://backupmedia.toshiba.eu/landing.aspx or you can use the Microsoft installation for the installation of the OS disc. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  If you have any other questions please let us know.

  Bye and good luck.

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• Activation problem with hard disk containing Vista deleted from a computer dead and installed in a work computer.

  Problem: HP laptop with Vista installed suffers an untimely death. The installed hard drive with Vista is still OK. Hard disk has been removed from the HP laptop and then installed in an old Dell laptop. Windows Vista is complaining that Vista is not valid and must be activated. I get the activation from valid product key and the activation utility responds with an error 0xC004E003 code and will not activate. Microsoft does not support chat or e-mail for Vista and I can not even a phone number to talk to a human being. I think I should be able to remove Vista from a computer and run it on another without Microsoft having a problem with it. What should I do for this? Any help will be appreciated. Thank you.

  Property to true. An OEM Vista license does "die with the computer. Conditions of licence for the version of Windows 8 have changed compared to the terms for the most comparable Windows 7 or Vista or XP. In my opinion, the terms are now even more restrictive, more or less.

  Good luck exploring alternatives to the BONE. Some Linux distributions are well worth a visit. Ubuntu, Suse and Mint are quite simple to install on a wide range of material. I'm not familiar with the Apple/Mac or Android offers, but many speak well of them.

  Calculation of the happy.

  Tom Ferguson

• Problem with the disk check.

  32-bit Vista Home Premium:

  About 6 months ago, I ran a Check Disk from my C drive (using Vista error checking tool) and checked the two boxes before starting (fix Auto file system and search for errors / attempt to recover bad sectors).

  He ran through the 1 5 6 controls without finding an error.

  On the 6th and final verification that it is running, it hung (or the 4th of 5 controls it works - do not remember if it is 5 or 6 it works). According to me, he started the final control, but stopped and none did not move. A few hours later he still hadn't moved, so I did a hard stop.

  Fortunately, everything was fine when I rebooted.

  I use the computer since then without problems/errors obvious hard drive, but I'm afraid to run another check of the disk, even though I would right now.

  Suggestions are welcome as to what might have caused the shot, and if I do another check of the disk.

  Yes, it's essentially the same command.  Personally, I never use the other method - I just use the one that I you provided.

  : You are right about the meaning switches - you already know or you're an awfully good guesser.  Since you have expressed interest, here's more information on CHKDSK you might find of interest with other switches and guidelines and some good information on how it works and how to use the results: http://www.vistax64.com/tutorials/67612-check-disk-chkdsk.html.

  If you cannot complete a cHkdsk on your hard drive, then there is a problem with the player that must be resolved before it is any worse.  I would definitely give it another chance and also run the diagnostics that I recommended in a previous post.

  I hope this helps and I hope that the test completes successfully this time.  If this isn't the case, I hope that the diagnostic test identifies the problem and it can be repaired than replaced (even if it's pretty rare - usually if it goes wrong it must be replaced).  If this is the case, I would as soon as possible to ensure that it is not so bad that you can no longer access the drive at all - but then again, there may be nothing wrong and we could be worrying for nothing but a bad block or two which is nothing to worry about in itself.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with the disk free space.

  I use the power of fire 7100 (the 5.3.0.3 Version of FireSight 5.4.1.7 sensor Version). I have political problems that apply to the device. And is unable to update sensor for the newest version. Cisco support community help me! Thank you! They and I think that this problem can be in the use of the disk.

  What I oh sensor:

  Size of filesystem used Avail use % mounted on
  / dev/sda5 2.9 G 562 M 2.2 G 21%.
  / dev/sda1 99M 37 M 58M 39% / Boot
  / dev/sda7 67 67 G 0 100% but
  No 1.9 G 136 K 1.9 G 1% / dev/shm

  May be the problem with the records of Volume.What I could check and delete? Thank you!

  Hello team,

  * Could you please check the following points: -.

  CD/var/tmp /.

  du-sh *.

  You can clear the/var/tmp/en using the following. Files under/var/tmp temporary files are. :-

  rm - rf *.

  It is a known bug where the but gets completely due to Apply_ files *.

  * Also check the following points: -.

  CD/var/sf/updates

  Remove the old patches if there are.

  * Check the following backup folder and the folder of detection engine too.

  CD/var/sf/upgrade_backup

  du-sh *.

  CD/var/sf/detection_engines

  du-sh *.

  Rate if this helps you.

  Concerning

  Jetsy

• L20-182: problem with battery LED

  Hello
  I have a problem with a light that indicates the battery charge rate. After having disconnected the outlet, the battery light to the front of the computer lights but not the light battery. Someone had such a problem? Thanks in advance for the help

  Hello

  Sorry, but your ad make me a bit confused.
  After that disconnect the power adapter, the battery lights up but it s not really a battery LED. Is this good?
  It would be very interesting to know what laptop you have.
  But nevertheless, in my view must confuse the portable LED.
  Please see the user manual. There you should find information on LEDs.

• Satellite L20-101: problem of graphics card if I play games

  I have a strange problem with graphics. Generally, all right, but I have problems with several games. Usually I'm not a gamer, but sometimes I like to play. Anyway.

  When I get out of the game, the colors on the default backup screen. I don't like the default colors so I changed it. After the reboot, all right. Also when I go into the graphical console and click on apply colors became as they were before the games. What's wrong?

  Also, is that when I play two games. These are games from codemasters. Maybe their games is not compatible with my graphics card?

  I have no other problems running these games.

  Hi Pawel

  Believe me it is not easy to provide any reasonable explanation. Maybe you should contact codemasters support. Usually after the release of the game display settings should be as before. I put t think that there is any sort of compatibility issue because in this case, you will not be able to read.

• Problems with check disk etc.

  I am constantly message on start up that I have a problem with NTFS, I do the consistency check, but I can't do it, my system just flicks and that's all! I also have a real problem with sound distortion and cracking more remarkable in games, etc. can someone help? I checked the drivers but no help am a novice about the tech things but could use some help, I was scammed! -I know, but have learned this lesson so I hope that geniune help you all I can also make a backup of everything more he says he's corrupt! Should I take the pill now or later?

  Hi, thanks for your response had attempted several times to chkdsk, never in safe mode, I contacted my provider now and they helped me clean my system and reload Windows Vista and I am up and running again, the noise problem that I had was reduced when I checked the key improvements. Thanks in any case.

• Satellite NB10t-A-101 - problem with graphics card Intel using Win 10

  After I upgraded to Windows 10, The graphics card worked fine, at least 4 months later, I saw that the Intel Graphics tray icon was missing when I went into device manager he had a small exclamation mark by it and said

  Your computer's system firmware does include enough information to properly configure and use this device.
  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35)

  Then, I looked a little further into the problem and found this:

  Problem code: 00000023
  The problem: the resources for this device in conflict with the MCFG table.
  C0000908

  I have not edited the PC somehow, any solution to this problem
  Specifications of the PC (if needed)

  Model - NB10t-A-101
  Processor - Intel Celeron n 2810 @ 2 GHz
  Graphics card: Intel HD Graphics.
  RAM - 4 GB

  (Another note: I need the last generic graphics driver for Windows 10,)

  If Win10 supports the Intel HD graphics chip, a driver will be available in Windows Update.

  Check if your HD from Intel is compatible:
  http://www.Intel.com/content/www/us/...000005526.html

• I have little problem with my disk utility.

  Hello Sir/Madam...

  I have a little problem that I can't fix it.... so please can someone help me with this question, I can only explain with this image as an attachment, I thank those still and wish everyone the best chance.

  

  Make a backup, best 2 separated on 2 discs. Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error.  If this doesn't resolve the problem, try reformatting the drive using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.

  OS X recovery

  OS X recovery (2)

• Pavilion G7-1328dx: I have a problem with recovery disks

  I have recived a message error (error bios 501) was one that says windows could not start at this point I did a system restore, it worked then it instaled updates and when I turned it off it seamed ok a few days elapsed before I go back and it didn't start so I tried to do the same restore point who had worked but im guess I chose the one bad because after that I could get in the bios for the test command and start system and info windows recovery tool not forbear even so I am really crazy and just ordered the HP recovery disks have tried a couple of times he says it didn't I saved a copy of the details , but I don't know how to open it so I can copy and past I also tried putting it in a windows disk because I realized that one problem I had is a new hard drive my boyfriend out the HDD without asking and wiped it and put it in his laptop, my friend was helping me with the laptop, but cannot stop now can someone please help

  Assume your drive recovery is ongoing demand... because the 501 error has not might be related to your operating system... or the hard drive...

  Maybe think I didn't read clearly on your description, but it seems that you already have recovery files broken, or the HARD drive is on form, no? Suggest that you call service help find someone help on data recovery. If the HARD drive has already been fomatted, it will take a few HARD drive recovery professional technician to do this action, using special equipment or tools. Sometimes it can get the restored data sometimes it breaks down, according to the State of the HARD drive. If he's already got formatt low level, it would be very unlikely to recover data... Then... you'd call better help service. Hope you can recover data.

  If you have already saved data I just re - install the operating system. It is easier. Alternatively, you can call the service provide the recovery disc number (printed on the label on the disc) see it's the right disc for your device. And try to use the right disc for re-installing.

• Problem with low disk space

  I get a disk space warning low all the morning. I went and cleaned the files that came in the box, but still having a problem. At least I have start deleting programs I use, I don't see where to get more 'space '.

  Thank you in advance. ~ mtntown

  PS average experience so feel not too technical.

  A loss of main surface within each user profile would be penchant of EI for the storage of copies (or much) of almost every web page you have already visited.  Try to reduce the amount of temporary Internet files put in cache, which is huge by default.  I always bring it back to a maximum of 50 MB.  In Internet Explorer, click on tools > Internet Options > general, temporary files > settings.

  Same principle for the Java cache. Start > Control Panel > Java > temporary Internet files > settings.

  The System Volume Information is the folder in restoration of which WinXP system feature stores information to retrieve errors.  By default, Windows XP sets aside a maximum of 12% of the size of the partition to store the information of the System Volume, but the amount of space reserved for this purpose can be adjusted by the user.  Start > all programs > Accessories > system tools > system restore > System Restore Settings, select the relevant partition and click settings.  If you don't want to use the system at all, restore simply to turn off System Restore (start > all programs > Accessories > system tools > system, System Restore settings restore) and restart.  This will remove all your Restore Points, thus freeing up hard disk space.

  An another great space waster may be trash.  By default, it takes up to 10% of the capacity of your hard drive. It's a lot of waste.  It can be set to a lower limit by right clicking the desktop Receycle Bin icon, select Properties, and using the scroll bar to reduce the maximum size to something more reasonable - 1% to 2% should be more than enough space.

• Problems with the disk drive - DVD playback

  I have a Windows Vista Ultimate 64 bit PC with a Samsung SH - S223C DVD, player, which both are a little less than two years. Recently, I started having problems mainly watching DVD and also some problems of installation of video games. When you watch DVDs in Windows Media Center or Media Player, the player is very slow to load the disc, even sometimes not at all. When it's load and play the video may freeze a lot while the drive and fast shipping and rewinding are a nightmare, that nothing is really happening, the picture just freezes. Boredom, it's a day DVD can be read without problems, but the next I meet the above problems. I tried to buy a DVD-ROM of Hama Laser Lens Cleaner disc, which did not solve the problem, it has made no difference.

  I encounter any problems when you watch a video recorded on Media Center, I am the owner of a TV Tuner and all saved games video very well without any problems. Also, I live in England so my hard drive is region 2.
  I have no idea how to fix this, it is very annoying. I'd appreciate any help that anyone can give me.

  Thank you.

  Hello Dan

  You can contact Samsung on the drive and see if there is an update of the firmware. If this isn't the case, you can replace the drive because it sounds like the drive itself is a failure.

• Equium L20-197: Problems with CD/DVD Drive Acoustic Silencer?

  Hey there...

  Recently, I used the small button of software called "CD/DVD Drive Acoustic Silencer" to calm the CD player while a CD is playing.

  Before that, a DVD would play well... now... a wil DVD stutter, it is in ANY player. WinDVD5, Windows Media etc... I clicked on 'Normal mode' hibernated, rebooted, turned off... nothing seems to work...

  DVD jump again... any help on this?

  Hello Danny

  What model of laptop you have exactly? Was this software already preinstalled on your device, or you install on your own?

  Try to use the system restore utility and restore the system to an earlier time. I put t know if this will help but you can try it.